A numerical study on the optimization of the slit shape of a jet injection propeller
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The shape of the slit that injects the jet from the surface of the propeller was optimized through numerical computations. The high-pressure drop on the propeller surface caused by jet injection could be improved by modifying the hydrofoil geometry of the propeller. As the cover length increased and the slit was located at the center of the propeller, the volume of jets leading to the trailing edge increased, and the propulsion performance was improved. As the height of the slit increased, the thrust increased due to the Coanda effect, and the torque decreased because of the thrust of the jet. The jet injection pattern differed according to the area of the slit and tunnel, which caused a difference in the propeller performance. The jet pattern changed according to the area of the slit and tunnel, leading to a change in propeller performance. It was effective in improving the efficiency by injecting from as wide an area as possible, and the efficiency was improved by approximately 2 % considering the pump efficiency through optimization of the slit shape.
Abstract
The shape of the slit that injects the jet from the surface of the propeller was optimized through numerical computations. The high-pressure drop on the propeller surface caused by jet injection could be improved by modifying the hydrofoil geometry of the propeller. As the cover length increased and the slit was located at the center of the propeller, the volume of jets leading to the trailing edge increased, and the propulsion performance was improved. As the height of the slit increased, the thrust increased due to the Coanda effect, and the torque decreased because of the thrust of the jet. The jet injection pattern differed according to the area of the slit and tunnel, which caused a difference in the propeller performance. The jet pattern changed according to the area of the slit and tunnel, leading to a change in propeller performance. It was effective in improving the efficiency by injecting from as wide an area as possible, and the efficiency was improved by approximately 2 % considering the pump efficiency through optimization of the slit shape.
참고문헌 (32)
- Baltazar, J., "On the use of the γ-Reθtransition model for the prediction of the propeller performance at model-scale", Ocean Engineering, 170, pp.6~19 (2018)
- Baltazar, J., "Prediction of the propeller performance at different Reynolds number regimes with RANS", J. Mar. Sci. Eng, 9(10), pp.1115~ (2021)
- Bhattacharyya, A., "Scale effects on open water characteristics of a controllable pitch propeller working within different duct designs", Ocean Engineering, 112, pp.226~242 (2016)
- Burnazzi, M., "Design and analysis of a droop nose for Coanda flap applications", J. Aircraft, 51(5), pp.1567~1579 (2014)
- Burnazzi, M., "Synergies between suction and blowing for active high-line flaps", CEAS Aeronautical Journal, 6(2), pp.305~318 (2015)
- Celik, I. B., "Procedure for estimation and reporting of uncertainty due to discretization in CFD applications", Journal of Fluids Engineering Transactions of the ASME, 130(7) (2008)
- Eom, M. J., "Numerical study on the lift-drag and cavitation performances of a two-dimensional hydrofoil using the Coanda effect", Journal of Advanced Marine Engineering and Technology, 44(6), pp.457~466 (2020)
- Go, J. S., "Effects of a duct before a propeller on propulsion performance", Ocean Engineering, 136, pp.54~66 (2017)
- Joung, T. H., "The IMO initial strategy for reducing Greenhouse Gas (GHG) emissions, and its follow-up actions towards 2050", Journal of International Maritime Safety, Environmental Affairs, and Shipping, 4(1), pp.1~7 (2020)
- Kadivar, E., "Cavitation control using cylindrical cavitating-bubble generators(CCGs) : experiments on a benchmark CAV2003 hydrofoil", Int. J. Multiphas. Flow, 125, pp.103186~ (2020)
- Kim, D. H., "CFD simulation on predicting POW performance adopting laminar-turbulent transient model", Journal of the Society of Naval Architects of Korea, 58(1), pp.1~9 (2021)
- Kuiper, G., "Cavitation inception on ship propeller model", PhD, pp.1981
- Lee, J. H., "Experimental study on supercavitated body with static angle-of-attack", Journal of the Society of Naval Architects of Korea, 56(6), pp.541~549 (2019)
- Lee, J. H., "Experimental and numerical study on the performance change of a simple propeller shape using the Coanda effect", Appl. Sci, 11(9), pp.4112~ (2021)
- Lu, S. P., "Experiment research on cavitation control by active injection", 10th International Symposium on Cavitation (2018)
- Maltsev, L. I., "Jet control of flow separation on hydrofoils : performance evaluation based on force and torque measurements", J. Eng. Thermophys, 29(3), pp.424~442 (2020)
- Menter, F. R., "Two-equation eddy-viscosity turbulence models for engineering applications", AIAA J, 32(8), pp.1598~1605 (1994)
- Menter, F. R., "A one-equation local correlationbased transition model", Flow, Turbul. Combust, 95, pp.583~619 (2015)
- Mizzi, K., "Design optimisation of propeller boss cap fins for enhanced propeller performance", Appl. Ocean Res, 62, pp.210~222 (2017)
- Oh, J. K., "A study on the high lifting device equipped with the trailing edge rotor for the enhancement of circulation control", Journal of the Society of Naval Architects of Korea, 47(4), pp.533~542 (2010)
- Oh, J. K., "On the lift enhancement technique of the trailing edge rotor of two-dimensional hydrofoil", Journal of the Korean Society of Marine Environment and Safety, 21(2), pp.200~206 (2015)
- Paik, B. G., "Fundamental studies for ventilated supercavitation experiments in new highspeed cavitation tunnel", Journal of the Society of Naval Architects of Korea, 55(4), pp.330~340 (2018)
- Pant, C. S., "Interaction between surface blowing and re-entrant jet in active control of hydrofoil cavitation", Ocean Engineering, 242, pp.110087~ (2021)
- Pham, V. D., "Numerical study of hot-gas ventilated supercavitating flow", Int. J. Nav. Archit. Ocean Eng, 14, pp.100470~ (2022)
- Seo, D. W., "A study for improvement of lift performance of a Horn-type rudder with the Coanda effect", Journal of the Society of Naval Architects of Korea, 47(4), pp.543~552 (2010)
- Seo, D. W., "Performance analysis of stabilizer fin applied Coanda system", Journal of Ocean Engineering and Technology, 30(1), pp.18~24 (2016)
- Timoshevskiy, M. V., "Cavitation control on a 2D hydrofoil through a continuous tangential injection of liquid: experimental study", AIP Conference Proceedings, 1770(1), pp.030026~ (2016), AIP Publishing LLC
- Timoshevskiy, M. V., "Manipulating cavitation by a wall jet : experiments on a 2D hydrofoil", Int. J. Multiphas. Flow, 99, pp.312~328 (2018)
- Wang, W., "Effect of water injection on the cavitation control : experiments on a NACA66(MOD)hydrofoil", Acta Mech. Sin, 36, pp.999~1017 (2020)
- Wang, X., "Computational analysis of marine-propeller performance using transition-sensitive turbulence modeling", J. Fluid Eng, 134(7), pp.071107~ (2012)
- Xu, H., "Comparison of supercavity geometry and gas leakage behavior between the double-cavity flow pattern and the wake-closure flow pattern", AIP Adv, 11(5) (2021)
- Zhou, J. J., "Numerical simulation of gas leakage mechanism of ventilated supercavity under the condition of low Froude number", Eng. Mech, 28(1), pp.251~256 (2011)