Interpretable, data-driven models for predicting shaft power, fuel consumption, and speed considering the effects of hull fouling and weather conditions
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In response to the global call for action to reduce CO2 emissions, operational measures such as speed, route optimization, and hull cleaning play a significant role in the maritime industry. These measures can be implemented immediately without significant investment in both newbuilding ships and existing ships. To make accurate decisions regarding operational measures, reliable and precise models of environmental conditions and effects of hull fouling are required. In this study, a data-driven approach using linear regression was applied to predict shaft power, fuel consumption, and speed after intensive data preparation and feature engineering. First, a shaft power prediction model was developed by combining three independent submodels: the RPM-power model, hull fouling model, and environmental effect model. Subsequently, fuel consumption and speed prediction models were developed based on the shaft power prediction model. Model validation was performed on a 174K LNG carrier, and the results showed good accuracy even in long-term ship operations of more than two years. The mean absolute percentage errors (MAPEs) of the prediction models were 1.60%, 1.70%, and 2.68% for the shaft power, fuel consumption, and speed, respectively. The validated models were applied to two LNG carriers, and satisfactory results were obtained. This study contributes to greenhouse gas (GHS) reduction by providing interpretable, flexible, and accurate models that can help make correct decisions regarding optimal operational measures.
Abstract
In response to the global call for action to reduce CO2 emissions, operational measures such as speed, route optimization, and hull cleaning play a significant role in the maritime industry. These measures can be implemented immediately without significant investment in both newbuilding ships and existing ships. To make accurate decisions regarding operational measures, reliable and precise models of environmental conditions and effects of hull fouling are required. In this study, a data-driven approach using linear regression was applied to predict shaft power, fuel consumption, and speed after intensive data preparation and feature engineering. First, a shaft power prediction model was developed by combining three independent submodels: the RPM-power model, hull fouling model, and environmental effect model. Subsequently, fuel consumption and speed prediction models were developed based on the shaft power prediction model. Model validation was performed on a 174K LNG carrier, and the results showed good accuracy even in long-term ship operations of more than two years. The mean absolute percentage errors (MAPEs) of the prediction models were 1.60%, 1.70%, and 2.68% for the shaft power, fuel consumption, and speed, respectively. The validated models were applied to two LNG carriers, and satisfactory results were obtained. This study contributes to greenhouse gas (GHS) reduction by providing interpretable, flexible, and accurate models that can help make correct decisions regarding optimal operational measures.
참고문헌 (41)
- Adland, R., "The energy efficiency effects of periodic ship hull cleaning", J. Clean. Prod, 178, pp.1~13 (2018)[DOI]
- Bakka, H., "Estimating the effect of biofouling on ship shaft power based on sensor measurements", Sh. J. Technol. Res (2022)[DOI]
- Berendsen, A. M., "Marine painting manual" (1989), Springer Science & Business Media
- Bouman, E. A., "State-of-the-art technologies, measures, and potential for reducing GHG emissions from shipping – a review", Transp. Res. D, 52, pp.408~421 (2017)[DOI]
- Carlton, J., "Marine Propellers and Propulsion" (2018), Elsevier Science
- Cho, Y., "Improvement of hull form for an 1,800 TEU containership toward reduced fuel consumption under in-service conditions", Int. J. Nav. Archit. Ocean Eng, 15, pp.100520~ (2023)[DOI]
- Coraddu, A., "Vessels fuel consumption forecast and trim optimization : a data analytics perspective", Ocean Eng, 130, pp.351~370 (2017)[DOI]
- Coraddu, A., "Data-driven ship digital twin for estimating the speed loss caused by the marine fouling", Ocean Eng, pp.186~ (2019)[DOI]
- Demirel, Y. K., "Practical added resistance diagrams to predict fouling impact on ship performance", Ocean Eng, 186, pp.106112~ (2019)[DOI]
- Demirel, Y. K., "Predicting the effect of biofouling on ship resistance using CFD", Appl. Ocean Res, 62, pp.100~118 (2017)[DOI]
- Farkas, A., "Towards the prediction of the effect of biofilm on the ship resistance using CFD", Ocean Eng, 167, pp.169~186 (2018)[DOI]
- Gkerekos, C., "Machine learning models for predicting ship main engine fuel oil consumption: a comparative study", Ocean Eng, pp.188~ (2019)[DOI]
- Granville, P. S., "The frictional resistance and turbulent boundary layer of rough surfaces", J. Sh Res, 2, pp.52~74 (1958)[DOI]
- Fourth IMO GHG Study 2020, "IMO", International Maritime Organization, ~ (2020)
- IMO Strategy on Reduction of GHG Emissions from Ships, "IMO", International Maritime Organization, ~ (2023)
- ISO, "ISO 19030 Ships and Marine Technology–Measurement of Changes in Hull and Propeller Performance", ~ (2016)
- ITTC, "Full scale measurements, speed and power trials, analysis of speed", power trial data. ITTC – Recomm. Proced. Guidel. 11, 2005
- Karagiannidis, P., "Data-driven modeling of ship propulsion and the effect of data pre-processing on the prediction of ship fuel consumption and speed loss", Ocean Eng, pp.222~ (2021)[DOI]
- Kim, Y. R., "Development of a fuel consumption prediction model based on machine learning using ship in-service data", J. Mar. Sci. Eng, 9, pp.1~25 (2021)[DOI]
- Kim, S. H., "Estimation of ship operational efficiency from AIS data using big data technology", Int. J. Naval Archit. Ocean Eng, 12, pp.440~453 (2020)[DOI]
- Kytariolou, A., "Optimized route planning under the effect of hull and propeller fouling and considering ocean currents", J. Mar. Sci. Eng, pp.11~ (2023)[DOI]
- Lagerstr¨om, M., "Are silicone foul-release coatings a viable and environmentally sustainable alternative to biocidal antifouling coatings in the Baltic Sea region? Mar", Pollut. Bull, 184, pp.114102~ (2022)[DOI]
- Laurie, A., "Machine learning for shaft power prediction and analysis of fouling related performance deterioration", Ocean Eng, pp.234~ (2021)[DOI]
- Lee, H. W., "Data association for autonomous ships based on the virtual simulation environment", Ocean Eng, pp.281~ (2023)[DOI]
- Lee, J. B., "Prediction of ship power based on variation in deep feed-forward neural network", Int. J. Nav. Archit. Ocean Eng, 13, pp.641~649 (2021)
- Makiharju, S. A., "On the energy economics of air lubrication drag reduction", Int. J. Nav. Archit. Ocean Eng, 4(4), pp.412~422 (2012)
- Molland, A., "Ship Resistance and Propulsion: Practical Estimation of Ship Propulsive Power" (2017), Cambridge University Press
- Odendaal, K., "Enhancing early-stage energy consumption predictions using dynamic operational voyage data : a grey-box modelling investigation", Int. J. Nav. Archit. Ocean Eng, 15, pp.100484~ (2023)
- Oliveira, D. R., "A novel indicator for ship hull and propeller performance : examples from two shipping segments", Ocean Eng, 205, pp.107229~ (2020)[DOI]
- Oliveira, D. R., "A novel tool for cost and emission reduction related to ship underwater hull maintenance", J. Clean. Prod, pp.356~ (2022)[DOI]
- Pedersen, Benjamin P., "Modeling of ship propulsion performance", World Maritime Technology Conference (2009), Institute of Marine Engineers
- Petersen, J. P., "A machine-learning approach to predict main energy consumption under realistic operational conditions", J. Technol. Res, 59, pp.64~72 (2012)[DOI]
- Schultz, M. P., "Effects of coating roughness and biofouling on ship resistance and powering", Biofouling, 23, pp.331~341 (2007)[DOI]
- Silva, E. R., "Eco-friendly non-biocide-release coatings for marine biofouling prevention", Sci. Total Environ, 650, pp.2499~2511 (2019)[DOI]
- Soner, O., "Statistical modeling of ship operational performance monitoring problem", J. Mar. Sci. Technol, 24, pp.543~552 (2019)[DOI]
- Song, S., "Penalty of hull and propeller fouling on ship selfpropulsion performance", Appl. Ocean Res, 94, pp.102006~ (2020)[DOI]
- Tran, T. G., "A study on the matching problem of engine, propeller, and ship hull under actual service conditions", Int. J. Nav. Archit. Ocean Eng, 15, pp.100538~ (2023)
- Turan, O., "Experimental determination of added hydrodynamic resistance caused by marine biofouling on ships", Transport. Res. Procedia, 14, pp.1649~1658 (2016)[DOI]
- Uzun, D., "Time-dependent biofouling growth model for predicting the effects of biofouling on ship resistance and powering", Ocean Eng, pp.191~ (2019)[DOI]
- You, Y., "Development of a framework to estimate the sea margin of an LNGC considering the hydrodynamic characteristics and voyage", Int. J. Nav. Archit. Ocean Eng, 12, pp.184~198 (2020)
- You, Y., "Comparative study on ammonia and liquid hydrogen transportation costs in comparison to LNG", Int. J. Nav. Archit. Ocean Eng, 15 (2023)[DOI]