A Study on the Performance Variation of a Three-Dimensional Hydrofoil Using Jet Flow
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
As one of the development directions of high-performance ships to reduce greenhouse gas emissions, there is research on high-performance propellers. However, in the case of conventional screw propellers, as they have been studied for a long time, there is a limit to improving efficiency only by depending on the conventional design and analysis methods. In this study, we tried to solve the problems using the Coanda effect by spraying a jet on the surface of the hydrofoil. The Coanda hydrofoil consists of a tunnel and jet slit to make jet flow. The computation was performed for each tunnel and slit position, and the efficiency according to the geometry of the hydrofoil was analyzed. In addition, a study on the 3D geometry change was conducted to analyze the performance according to the span direction spraying range and hydrofoil shape. As the height of the slit and the diameter of the tip were lower, when the slit is located in the center of the hydrofoil, the lift force increased and the drag force decreased. The increase rate of lift-to-drag ratio was different according to the shape of the hydrofoil, and the efficiency of the spraying condition of 0.1S-0.5S, which had the least effect on the vortex at the tip of the blade, was high for all 3D hydrofoils. When the geometry of the slit was optimized, and also the shape and spray range of the hydrofoil in 3D was considered, the efficiency of the jet sprayed hydrofoil was increased.
Abstract
As one of the development directions of high-performance ships to reduce greenhouse gas emissions, there is research on high-performance propellers. However, in the case of conventional screw propellers, as they have been studied for a long time, there is a limit to improving efficiency only by depending on the conventional design and analysis methods. In this study, we tried to solve the problems using the Coanda effect by spraying a jet on the surface of the hydrofoil. The Coanda hydrofoil consists of a tunnel and jet slit to make jet flow. The computation was performed for each tunnel and slit position, and the efficiency according to the geometry of the hydrofoil was analyzed. In addition, a study on the 3D geometry change was conducted to analyze the performance according to the span direction spraying range and hydrofoil shape. As the height of the slit and the diameter of the tip were lower, when the slit is located in the center of the hydrofoil, the lift force increased and the drag force decreased. The increase rate of lift-to-drag ratio was different according to the shape of the hydrofoil, and the efficiency of the spraying condition of 0.1S-0.5S, which had the least effect on the vortex at the tip of the blade, was high for all 3D hydrofoils. When the geometry of the slit was optimized, and also the shape and spray range of the hydrofoil in 3D was considered, the efficiency of the jet sprayed hydrofoil was increased.
참고문헌 (6)
- Harijono Djojodihardjo, "Progress and Development of Coandă Jet and Vortex Cell for Aerodynamic Surface Circulation Control – An Overview", The SIJ Transactions on Advances in Space Research & Earth Exploration, 1(2), pp.14~24 (2013), Bonfring[DOI]
- 엄명진, "Numerical study on the lift-drag and cavitation performances of a two-dimensional hydrofoil using the Coanda effect", 한국마린엔지니어링학회지, 44(6), pp.457~466 (2020), 한국마린엔지니어링학회[DOI]
- Pfingsten, K.C., "New Results in Numerical and Experimental Fluid Mechanics VI", pp.71~79 (2007), Springer
- 서대원, "코안다 시스템이 장착된 안정기용 핀의 성능해석", 한국해양공학회지, 30(1), pp.18~24 (2016), 한국해양공학회
- 서대원, "콴다효과를 이용한 전 가동 타의 양력성능 개선에 관한 연구", 대한조선학회 논문집, 50(1), pp.25~32 (2013), 대한조선학회
- 윤상현, "동축류의 코안다 효과를 이용한 초음속 제트의 추력편향제어에 관한 실험적 연구", 한국항공우주학회지, 40(11), pp.927~933 (2012), 한국항공우주학회