개선된 드릴 디자인을 적용한 간소화된 드릴링 과정에 관한 연구
A study on simplified procedure of enhanced designed implant drill
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose : The objective of this research was to develop a more simplified drilling procedure with an enhanced implant drill. Materials and Methods : The drill enhanced design factors enabled implantation of Dia. 5.0mm fixture with only 2 times drilling which is more simplified drilling procedure. The enhanced drill was designed with 2 flutes, 2-phase or 3-phase formed drill tip and 25 degrees of helix angle. The proposed drilling procedure (2 times) was compared with a general drilling process (4 times) in terms of temperature changes, cutting time and ISQ value. Results : The simplified drilling procedure indicated less heat than a conventional drilling procedure (p<0.05). The enhanced drill showed significantly shorter drilling time than a conventional drill (p<0.05). On the other hand, higher insertion torque and ISQ value were observed on the the suggested drilling procedure than the conventional drilling procedure (p<0.05). Conclusion : A simplified drilling procedure with the newly designed drill could provide higher effectiveness and safety of dental implant operations under properly controlled external conditions, such as irrigation and RPM of drilling.
Abstract
Purpose : The objective of this research was to develop a more simplified drilling procedure with an enhanced implant drill. Materials and Methods : The drill enhanced design factors enabled implantation of Dia. 5.0mm fixture with only 2 times drilling which is more simplified drilling procedure. The enhanced drill was designed with 2 flutes, 2-phase or 3-phase formed drill tip and 25 degrees of helix angle. The proposed drilling procedure (2 times) was compared with a general drilling process (4 times) in terms of temperature changes, cutting time and ISQ value. Results : The simplified drilling procedure indicated less heat than a conventional drilling procedure (p<0.05). The enhanced drill showed significantly shorter drilling time than a conventional drill (p<0.05). On the other hand, higher insertion torque and ISQ value were observed on the the suggested drilling procedure than the conventional drilling procedure (p<0.05). Conclusion : A simplified drilling procedure with the newly designed drill could provide higher effectiveness and safety of dental implant operations under properly controlled external conditions, such as irrigation and RPM of drilling.
참고문헌 (17)
- 정선영, "임플란트 만족도와 삶의 질 간의 관련성에 대한 구조방정식모델 분석", 대한치과보철학회지, 49(4), pp.291~299 (2011), 대한치과보철학회
- Shin HS, "The policy intervention for dental implant and bone graft material industry in Korea", Korea institute for health and social affairs, 3~23 (2009)
- Albrektsson T, "Osseointegrated titanium implants. :Requirements for ensuring a long lasting, direct bone ankorage in man", Acta Orthop Scand Vol, 52, pp.155~170 (1981)
- Eriksson RA, "Thermal injury to bone. A vital microscopic description of heat effects", Int J Oral Surg, 1, pp.115~121 (1982)
- Eriksson RA, "Temperature threshold levels for heat-induced bone tissue injury. A vital microscopic study in rabbit", J Prosthet Dent, 50, pp.101~107 (1983)
- Eriksson RA, "The effect of heat on bone regeneration : An experimental study in rabbit using the bone growth chamber", J Oral Maxillofac Surg, 42, pp.705~711 (1984)
- 윤지훈, "새로 고안된 임플란트 드릴의 간소화된 드릴링 과정이 온도변화 및 절삭시간에 미치는 영향에 관한 연구", 대한치과재료학회지, 39(1), pp.9~16 (2012), 대한치과재료학회
- 김덕래, "연질 골에서 두 종류의 테이퍼 형태 임플란트의 초기 안정성에 관한 실험실적 연구", 구강회복응용과학지, 25(4), pp.391~401 (2009), 대한턱관절교합학회
- 황성택, "생체활성 유기물로 표면이 개질된 임플란트 개발 추이 분석 연구", 대한치과보철학회지, 49(03), pp.254~262 (2011), 대한치과보철학회
- 이승훈, "상악 전치부에서 단일 치아 발거 후 즉시 임플란트 식립", Journal of Periodontal & Implant Science, 37(3), pp.637~646 (2007), 대한치주과학회
- Sener BC, "Effects of irrigation temperature on heat control in vitro at different drilling depths", Clinical Oral Implants Research, 20, pp.294~298 (2009)
- Eriksson RA, "Temperatures during drilling for the placement of implants using the osseointegration technique", J Oral Maxillofac Surg, 44, pp.4~7 (1986)
- Cordioli G, "Heat generation during implant site preparation : An in vitro study", Int J Oral Maxillofac Implants, 12, pp.186~193 (1997)
- Hyun Jun Oh, "Effect of implant drill characteristics on heat generation in osteotomy sites : a pilot study", Clinical Oral Implants Research, 22, pp.722~726 (2011)
- Sharawy M, "Heat Generation During Implant Drilling: The Significance of Motor Speed", J Oral Maxillofac Surg, 60(10), pp.1160~1169 (2002)
- Brisman DL, "The effect of speed, pressure, and time on bone temperature during the drilling of implant sites", . Int J Oral Maxillofac Implants, 11(1), pp.35~37 (1996)
- Fanuscu MI, "Effect if surgical techniques on primary implant stability and periimplant bone", J Oral Maxillofac Surg, 65, pp.2487~2491 (2007)