본문 바로가기
KERD
논문KCI 등재

Evaluation of C. Albicans and S. Mutans adherence on different provisional crown materials

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

초록

PURPOSE. Bacterial adhesion on provisional crown materials retained for a long time can influence the duration for which permanent prosthetic restorations can be healthily worn in the oral cavity. The aim of this study was to compare seven different commonly used provisional crown materials with regard to Streptococcus mutans and Candida albicans surface adhesion. MATERIALS AND METHODS. For each group, twenty specimens of the provisional fixed prosthodontic materials TemDent (Schütz), Imıdent (Imıcryl), Tab 2000 (Kerr), Structur Premium (Voco), Systemp (Ivoclar Vivadent), Acrytemp (Zhermack), and Takilon-BBF (Takilon) were prepared (diameter, 10.0 mm; height, 2.0 mm). Surface roughness was assessed by atomic force microscopy. Each group was then divided into 2 subgroups (n=10) according to the microbial suspensions used: S. mutans and C. albicans. The specimens were incubated at 37°C with S. mutans or C. albicans for seven days. Bacterial adherence on surfaces was assessed using the 2,3-bis[2-methyloxy-4-nitro-5-sulfophenyl]-2H-tetrazolium-5-carboxanilide (XTT) assay. RESULTS. S. mutans showed maximum adhesion to Structur, followed by Systemp, Acrytemp, Takilon, Tab 2000, Imident, and TemDent (P<.05). The highest vital C. albicans adhesion was noted on Takilon, followed by Imident and Tab 2000; the lowest adhesion was noted on Systemp (P<.05). CONCLUSION. The materials showed significant differences in the degree of bacterial adhesion. C. albicans showed higher surface adhesion than S. mutans on provisional crown and fixed partial denture denture materials.

Abstract

PURPOSE. Bacterial adhesion on provisional crown materials retained for a long time can influence the duration for which permanent prosthetic restorations can be healthily worn in the oral cavity. The aim of this study was to compare seven different commonly used provisional crown materials with regard to Streptococcus mutans and Candida albicans surface adhesion. MATERIALS AND METHODS. For each group, twenty specimens of the provisional fixed prosthodontic materials TemDent (Schütz), Imıdent (Imıcryl), Tab 2000 (Kerr), Structur Premium (Voco), Systemp (Ivoclar Vivadent), Acrytemp (Zhermack), and Takilon-BBF (Takilon) were prepared (diameter, 10.0 mm; height, 2.0 mm). Surface roughness was assessed by atomic force microscopy. Each group was then divided into 2 subgroups (n=10) according to the microbial suspensions used: S. mutans and C. albicans. The specimens were incubated at 37°C with S. mutans or C. albicans for seven days. Bacterial adherence on surfaces was assessed using the 2,3-bis[2-methyloxy-4-nitro-5-sulfophenyl]-2H-tetrazolium-5-carboxanilide (XTT) assay. RESULTS. S. mutans showed maximum adhesion to Structur, followed by Systemp, Acrytemp, Takilon, Tab 2000, Imident, and TemDent (P<.05). The highest vital C. albicans adhesion was noted on Takilon, followed by Imident and Tab 2000; the lowest adhesion was noted on Systemp (P<.05). CONCLUSION. The materials showed significant differences in the degree of bacterial adhesion. C. albicans showed higher surface adhesion than S. mutans on provisional crown and fixed partial denture denture materials.

참고문헌 (28)

  1. Johnston JF, "Johnston’s modern practice in fixed prosthodontics", pp.77~90 (1986), WB Saunders
  2. Bayindir F, "The effect of staining solutions on the color stability of provisional prosthodontic materials", J Dent, 40, pp.e41~e46 (2012)
  3. Gegauff AG, "Provisional restorations. Contemporary fixed prosthodontics", pp.380~416 (2001), Mobsy Inc
  4. Gough M, "A review of temporary crowns and bridges", Dent Update, 21, pp.203~207 (1994)
  5. Buergers R, "Bacterial adhesion of Streptococcus mutans to provisional fixed prosthodontic material", J Prosthet Dent, 98, pp.461~469 (2007)
  6. An YH, "Concise review of mechanisms of bacterial adhesion to biomaterial surfaces", J Biomed Mater Res, 43, pp.338~348 (1998)
  7. Morgan TD, "The effects of surface roughness and type of denture acrylic on biofilm formation by Streptococcus oralis in a constant depth film fermentor", J Appl Microbiol, 91, pp.47~53 (2001)
  8. Whittaker CJ, "Mechanisms of adhesion by oral bacteria", Annu Rev Microbiol, 50, pp.513~552 (1996)
  9. Gaines S, "A novel spectrofluorometric microassay for Streptococcus mutans adherence to hydroxylapatite", J Microbiol Methods, 54, pp.315~323 (2003)
  10. Scully C, "Oral and maxillofacial diseases", pp.114~115 (2004), Mosby Co
  11. Odds FC, "Candida and Candidosis", pp.42~59 (1988), Bailliere Tindalll
  12. Karayazgan B, "Evaluation of Candida albicans formation on feldspathic porcelain subjected to four surface treatment methods", Dent Mater J, 29, pp.147~153 (2010)
  13. Taylor RL, "The influence of substratum topography on bacterial adhesion to polymethyl methacrylate", J Mater Sci Mater Med, 9, pp.17~22 (1998)
  14. Okte E, "Bacterial adhesion of Actinobacillus actinomycetemcomitans serotypes to titanium implants: SEM evaluation. A preliminary report", J Periodontol, 70, pp.1376~1382 (1999)
  15. Grivet M, "Effect of hydrophobicity on in vitro streptococcal adhesion to dental alloys", J Mater Sci Mater Med, 11, pp.637~642 (2000)
  16. Roehm NW, "An improved colorimetric assay for cell proliferation and viability utilizing the tetrazolium salt XTT", J Immunol Methods, 142, pp.257~265 (1991)
  17. Paull KD, "The synthesis of XTT: A new tetrazolium reagent that is bioreducible to a water-soluble formazan", J Heterocycl Chem, 25, pp.911~914 (1988)
  18. Blankenship JR, "How to build a biofilm: a fungal perspective", Curr Opin Microbiol, 9, pp.588~594 (2006)
  19. Tsang CS, "Antifungal susceptibility of Candida albicans biofilms on titanium discs with different surface roughness", Clin Oral Investig, 11, pp.361~368 (2007)
  20. De-Deus G, "Optimal cytocompatibility of a bioceramic nanoparticulate cement in primary human mesenchymal cells", J Endod, 35, pp.1387~1390 (2009)
  21. Zortuk M, "Bacterial adhesion of porphyromonas gingivalis on provisional fixed prosthetic materials", Dent Res J (Isfahan), 7, pp.35~40 (2010)
  22. Rosentritt M, "Adhesion of Streptococcus mutans to various dental materials in a laminar flow chamber system", J Biomed Mater Res B Appl Biomater, 86, pp.36~44 (2008)
  23. Sardin S, "In vitro streptococcal adherence on prosthetic and implant materials. Interactions with physicochemical surface properties", J Oral Rehabil, 31, pp.140~148 (2004)
  24. Quirynen M, "The influence of surface roughness and surface-free energy on supra- and subgingival plaque formation in man. A review of the literature", J Clin Periodontol, 22, pp.1~14 (1995)
  25. Nyvad B, "Scanning electron microscopy of early microbial colonization of human enamel and root surfaces in vivo", Scand J Dent Res, 95, pp.287~296 (1987)
  26. Mıura T, "Antifungal activity against Candida albicans on PMMA coated with protamine derivatives", J Oral Tissue Engin, 8, pp.30~38 (2010)
  27. Bürgers R, "Candida albicans adhesion to composite resin materials", Clin Oral Investig, 13, pp.293~299 (2009)
  28. Anil S, "The impact of chlorhexidine gluconate on the relative cell surface hydrophobicity of oral Candida albicans", Oral Dis, 7, pp.119~122 (2001)

관련 논문AI추천

Adherence of Candida to complete denture surfaces in vitro: A comparison of conventional and CAD/CAM complete denturesAfnan F. Al-Fouzan, Ahmed M. Albarrag, Lamya A. Al-mejrad대한치과보철학회 · The Journal of Advanced of Prosthodontics2017 · 제9권 제5호Effect of biofilm formation, and biocorrosion on denture base fracturesAlper Ergin, Cem Sahin, Erdal Cosgun, Gulay Uzun, Simel Ayyildiz대한치과보철학회 · The Journal of Advanced of Prosthodontics2013 · 제5권 제2호Effect of denture cleansers on Candida albicans biofilm formation over resilient liners신상완, 윤혜인, 이정열, 임영훈, 허중보, Brian Myung Chang대한치과보철학회 · The Journal of Advanced of Prosthodontics2014 · 제6권 제2호Initial bacterial adhesion on resin, titanium and zirconia in vitro김대준, 이병철, 정길용, 한중석대한치과보철학회 · The Journal of Advanced of Prosthodontics2011 · 제3권 제2호Biofilm-forming ability and adherence to poly-(methylmethacrylate) acrylic resin materials of oral Candida albicans strains isolated from HIV positive subjectsArife Dogan, Arzu Zeynep Yildirim Bic, Emel Uzunoglu, Istar Dolapci대한치과보철학회 · The Journal of Advanced of Prosthodontics2014 · 제6권 제1호The effect of two artificial salivas on the adhesion of Candida albicans to heatpolymerized acrylic resinBurcin Oncul, Duygu Karakis, Funda Dogruman Al대한치과보철학회 · The Journal of Advanced of Prosthodontics2015 · 제7권 제2호

이 간행물의 다른 논문 (11건)