Effect of biofilm formation, and biocorrosion on denture base fractures
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
PURPOSE. The aim of this study was to investigate the destructive effects of biofilm formation and/or biocorrosive activity of 6 different oral microorganisms. MATERIALS AND METHODS. Three different heat polymerized acrylic resins (Ivocap Plus, Lucitone 550, QC 20) were used to prepare three different types of samples. Type “A” samples with “V” type notch was used to measure the fracture strength, “B” type to evaluate the surfaces with scanning electron microscopy and “C” type for quantitative biofilm assay. Development and calculation of biofilm covered surfaces on denture base materials were accomplished by SEM and quantitative biofilm assay. According to normality assumptions ANOVA or Kruskal-Wallis was selected for statistical analysis (α=0.05). RESULTS. Significant differences were obtained among the adhesion potential of 6 different microorganisms and there were significant differences among their adhesion onto 3 different denture base materials. Compared to the control groups after contamination with the microorganisms, the three point bending test values of denture base materials decreased significantly (P<.05); microorganisms diffused at least 52% of the denture base surface. The highest median quantitative biofilm value within all the denture base materials was obtained with P. aeruginosa on Lucitone 550. The type of denture base material did not alter the diffusion potential of the microorganisms significantly (P>.05). CONCLUSION. All the tested microorganisms had destructive effect over the structure and composition of the denture base materials.
Abstract
PURPOSE. The aim of this study was to investigate the destructive effects of biofilm formation and/or biocorrosive activity of 6 different oral microorganisms. MATERIALS AND METHODS. Three different heat polymerized acrylic resins (Ivocap Plus, Lucitone 550, QC 20) were used to prepare three different types of samples. Type “A” samples with “V” type notch was used to measure the fracture strength, “B” type to evaluate the surfaces with scanning electron microscopy and “C” type for quantitative biofilm assay. Development and calculation of biofilm covered surfaces on denture base materials were accomplished by SEM and quantitative biofilm assay. According to normality assumptions ANOVA or Kruskal-Wallis was selected for statistical analysis (α=0.05). RESULTS. Significant differences were obtained among the adhesion potential of 6 different microorganisms and there were significant differences among their adhesion onto 3 different denture base materials. Compared to the control groups after contamination with the microorganisms, the three point bending test values of denture base materials decreased significantly (P<.05); microorganisms diffused at least 52% of the denture base surface. The highest median quantitative biofilm value within all the denture base materials was obtained with P. aeruginosa on Lucitone 550. The type of denture base material did not alter the diffusion potential of the microorganisms significantly (P>.05). CONCLUSION. All the tested microorganisms had destructive effect over the structure and composition of the denture base materials.
참고문헌 (26)
- van Heumen CC, "Fiber-reinforced dental composites in beam testing", Dent Mater, 24, pp.1435~1443 (2008)
- Keenan PL, "Dimensional change in complete dentures fabricated by injection molding and mi-crowave processing", J Prosthet Dent, 89, pp.37~44 (2003)
- Rached RN, "Efficacy of conventional and experimental techniques for denture repair", J Oral Rehabil, 31, pp.1130~1138 (2004)
- Stipho HD, "Repair of acrylic resin denture base reinforced with glass fiber", J Prosthet Dent, 80, pp.546~550 (1998)
- Berger JC, "Surface roughness of denture base acrylic resins after processing and after polishing", J Prosthodont, 15, pp.180~186 (2006)
- Verran J, "Retention of Candida albicans on acrylic resin and silicone of different surface topography", J Prosthet Dent, 77, pp.535~539 (1997)
- Nikawa H, "Denture plaque-past and recent concerns", J Dent, 26, pp.299~304 (1998)
- Ramage G, "Denture stomatitis: a role for Candida biofilms", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 98, pp.53~59 (2004)
- Beech IB, "Microbiallyinfluenced corrosion: damage to prostheses, delight for bacteria", Int J Artif Organs, 29, pp.443~452 (2006)
- Busscher HJ, "van der Mei HC.Biofilm formation on dental restorative and implant materials", J Dent Res, 89, pp.657~665 (2010)
- Yuan SJ, "Microbiologically influenced corrosion of 304 stainless steel by aerobic Pseudomonas NCIMB 2021 bacteria: AFM and XPS study", Colloids Surf B Biointerfaces, 59, pp.87~99 (2007)
- Paranhos HF, "Effect of three methods for cleaning dentures on biofilms formed in vitro on acrylic resin", J Prosthodont, 18, pp.427~431 (2009)
- da Silva WJ, "Bioactivity and architecture of Candida albicans biofilms developed on poly(methyl methacrylate) resin surface", J Biomed Mater Res B Appl Biomater, 94, pp.149~156 (2010)
- Wakimoto N, "Quantitative biofilm assay using a microtiter plate to screen for enteroaggregative Escherichia coli", Am J Trop Med Hyg, 71, pp.687~690 (2004)
- Christensen GD, "Adherence of coagulase-negative staphylococci to plastic tissue culture plates: a quantitative model for the adherence of staphylococci to medical devices", J Clin Microbiol, 22, pp.996~1006 (1985)
- Sahin C, "In vitro permeability of etch-and-rinse and self-etch adhesives used for immediate dentin sealing", Dent Mater J, 31, pp.401~408 (2012)
- Zappini G, "Comparison of fracture tests of denture base materials", J Prosthet Dent, 90, pp.578~585 (2003)
- Bural C, "Flexural properties of repaired heat-polymerising acrylic resin after wetting with monomer and acetone", Gerodontology, 27, pp.217~223 (2010)
- Takahashi T, "Influence of reinforcing materials on strain of maxillary complete denture", Acta Odontol Scand, 71, pp.307~311 (2013)
- Takahashi Y, "Fracture resistance of maxillary complete dentures subjected to long-term water immersion", Gerodontology, 29, pp.1086~1091 (2012)
- Hedzelek W, "Comparison of mechanical strength of palatal denture bases made from various plastic materials", Int J Prosthodont, 19, pp.193~194 (2006)
- Serrano-Granger C, "In vitro study of the adherence of Candida albicans to acrylic resins: relationship to surface energy", Int J Prosthodont, 18, pp.392~398 (2005)
- Kedjarune U, "Release of methyl methacrylate from heat-cured and autopolymerized resins: cytotoxicity testing related to residual monomer", Aust Dent J, 44, pp.25~30 (1999)
- Waltimo T, "Adherence of Candida species to newly polymerized and water-stored denture base polymers", Int J Prosthodont, 14, pp.457~460 (2001)
- Narva KK, "The static strength and modulus of fiber reinforced denture base polymer", Dent Mater, 21, pp.421~428 (2005)
- Bak J, "A UVC device for intra-luminal disinfection of catheters: in vitro tests on soft polymer tubes contaminated with Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli and Candida albicans", Photochem Photobiol, 87, pp.1123~1128 (2011)