Color changes of ceramic veneers following glazing with respect to their composition
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
PURPOSE. The purpose of this study was to compare the translucency and color changes of ceramic laminate veneers of different composition following glazing process. MATERIALS AND METHODS. 10 mm × 10 mm square specimens of 0.6 mm and 1.0 mm thicknesses were fabricated with IPS e.max Press (EM) and IPS e.max ZirPress (ZP) (n=10 per group). The color coordinates (CIE L* a* b*) of the specimens were recorded with a colorimeter before and after glazing. The color changes and translucency parameter (TP) were calculated. For the comparisons with the composition and thicknesses between the ‘not glazed’ and ‘glazed’ groups, statistical analyses were done through paired T-test, independent two-sample T-test, and multiple regression analysis using SPSS 18.0 (P<.05). RESULTS. The TP of 0.6 mm EM was higher than that of 0.6 mm ZP. Total color difference (ΔE*) between bare and glazed specimens of 1.0 mm EM was greater than that of 1.0 mm ZP with statistical significance. Following glazing, specimens from all groups showed statistically significant amount of decrease in L* and a*, and statistically significant increase in b*. The result of multiple regression analysis of EM and ZP showed that ∆L* improved ∆E*. CONCLUSION. Within the limitations of present study, we conclude that translucency and color of ceramic laminate veneers change significantly after glazing process, and the nature and amount of changes vary with different compositions. [ J Adv Prosthodont 2019;11:16-22]
Abstract
PURPOSE. The purpose of this study was to compare the translucency and color changes of ceramic laminate veneers of different composition following glazing process. MATERIALS AND METHODS. 10 mm × 10 mm square specimens of 0.6 mm and 1.0 mm thicknesses were fabricated with IPS e.max Press (EM) and IPS e.max ZirPress (ZP) (n=10 per group). The color coordinates (CIE L* a* b*) of the specimens were recorded with a colorimeter before and after glazing. The color changes and translucency parameter (TP) were calculated. For the comparisons with the composition and thicknesses between the ‘not glazed’ and ‘glazed’ groups, statistical analyses were done through paired T-test, independent two-sample T-test, and multiple regression analysis using SPSS 18.0 (P<.05). RESULTS. The TP of 0.6 mm EM was higher than that of 0.6 mm ZP. Total color difference (ΔE*) between bare and glazed specimens of 1.0 mm EM was greater than that of 1.0 mm ZP with statistical significance. Following glazing, specimens from all groups showed statistically significant amount of decrease in L* and a*, and statistically significant increase in b*. The result of multiple regression analysis of EM and ZP showed that ∆L* improved ∆E*. CONCLUSION. Within the limitations of present study, we conclude that translucency and color of ceramic laminate veneers change significantly after glazing process, and the nature and amount of changes vary with different compositions. [ J Adv Prosthodont 2019;11:16-22]
참고문헌 (30)
- Ryu SY, "A study on the color stability of porcelain for porcelain fused to metal crown", J Korean Acad Prosthodont, 38, pp.73~84 (2000)
- Joiner A, "Tooth colour : a review of the literature", J Dent, 32, pp.3~12 (2004)
- Al Ben Ali A, "The effect of variations in translucency and background on color differences in CAD", CAM lithium disilicate glass ceramics, 2014, pp.23, 213~220
- Barizon KT, "Ceramic materials for porcelain veneers:part II. Effect of material, shade, and thickness on translucency", J Prosthet Dent, 112, pp.864~870 (2014)
- Yilmaz C, "Color stability of glazed and polished dental porcelains", J Prosthodont, 17, pp.20~24 (2008)
- Wiskott HWA, "Fixed prosthodontics: principles and clinics", pp.670~671 (2011), Quintessence publishing
- Choi BB, "Contemporary fixed prosthodontics", pp.645~ (2003), Jisung Publishing
- Kerem Yılmaz, "The effect of repeated firings on the color change of dental ceramics using different glazing methods", The Journal of Advanced of Prosthodontics, 6(6), pp.427~433 (2014), 대한치과보철학회[DOI]
- Obregon A, "Effects of opaque and porcelain surface texture on the color of ceramometal restorations", J Prosthet Dent, 46, pp.330~340 (1981)
- Heffernan MJ, "Relative translucency of six all-ceramic systems. Part II: core and veneer materials", J Prosthet Dent, 88, pp.10~15 (2002)
- Chu FC, "Contrast ratios and masking ability of three types of ceramic veneers", J Prosthet Dent, 98, pp.359~364 (2007)
- Spear F, "Which all-ceramic system is optimal for anterior esthetics?", J Am Dent Assoc, 139, pp.19S~24S (2008)
- Kim SJ, "Translucency and masking ability of various opaque-shade composite resins", J Dent, 37, pp.102~107 (2009)
- Sinmazisik G, "Influence of dentin and core porcelain thickness on the color of fully sintered zirconia ceramic restorations", J Prosthet Dent, 111, pp.142~149 (2014)
- 김성준, "세라믹 비니어의 글레이징에 따른 반투명도 변화", 대한치과보철학회지, 53(2), pp.138~143 (2015), 대한치과보철학회[DOI]
- 감세훈, "Color difference of lithium disilicate ceramic veneer on glazing effect", Oral Biology Research, 40(3), pp.124~128 (2016), 치의학연구원[DOI]
- 감세훈, "Color change of lithium disilicate ceramic veneer on different thicknesses with and without glazing", Oral Biology Research, 41(01), pp.8~14 (2017), 치의학연구원[DOI]
- "British standard specification for dental porcelains for jacket crowns. BS5612", British Standard Institution, ~ (1978)
- Johnston WM, "Translucency parameter of colorants for maxillofacial prostheses", Int J Prosthodont, 8, pp.79~86 (1995)
- Santos MO, "Influence of translucence", opacity and shade in the flexural strength of lithium disilicate ceramics, 2015, pp.18, 394~398
- Bagis B, "Optical properties of current ceramics systems for laminate veneers", J Dent, 41, pp.e24~e30 (2013)
- Wang H, "Influence of varied surface texture of dentin porcelain on optical properties of porcelain specimens", J Prosthet Dent, 105, pp.242~248 (2011)
- Awad D, "Translucency of esthetic dental restorative CAD", CAM materials and composite resins with respect to thickness and surface roughness, 2015, pp.113, 534~540
- Jeong ID, "Translucency of zirconia-based pressable ceramics with different core and veneer thicknesses", J Prosthet Dent, 115, pp.768~772 (2016)
- Sevcan Kurtulmus-Yilmaz, "Comparison of the translucency of shaded zirconia all-ceramic systems", The Journal of Advanced of Prosthodontics, 6(5), pp.415~422 (2014), 대한치과보철학회[DOI]
- Kuehni RG, "An experiment in visual scaling of small color differences", Color Res Appl, 4, pp.83~91 (1979)
- Ragain JC, "Color acceptance of direct dental restorative materials by human observers", Color Res Appl, 25, pp.278~285 (2000)
- Ruyter IE, "olor stability of dental composite resin materials for crown and bridge veneers", Dent Mater, 3, pp.246~251 (1987)
- Johnston WM, "ssessment of appearance match by visual observation and clinical colorimetry", J Dent Res, 68, pp.819~822 (1989)
- Sedanur Turgut, "How will surface treatments affect the translucency of porcelain laminate veneers?", The Journal of Advanced of Prosthodontics, 6(1), pp.8~13 (2014), 대한치과보철학회[DOI]