Influences of luting cement shade on the color of various translucent monolithic zirconia and lithium disilicate ceramics for veneer restorations
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose. The purpose of this study was to assess the effect of resin cement shade on the color of different novel ultratranslucent monolithic zirconia and lithium disilicate veneer materials. Materials and methods. For a total of 40 specimens, flat cylindrical discs with a 9-mm diameter and 0.5-mm thickness were created using CAD/CAM technology. The specimens were divided into five groups according to their material (n = 8) (e.max, Prettau, Aidite, Shofu and Dima) using A1 shade. Resin discs with the same diameter and shade as the specimens served as tooth-colored substructures. Three shades (neutral, light and warm) of resin cement try-in pastes (Variolink Esthetic LC) were used as the luting cement material. The color of each material group was measured before and after cementation using the three cement shades, and the CIE L*a* b* coordinates were obtained with a spectrophotometer. Values for the translucency parameter (TP) and color change delta E (E) before (baseline) and after cementation of each specimen were determined. To compare differences among the material groups within each shade of cement and among various shades of cement within each material, the data were analyzed using one-way ANOVA and post hoc testing. Results. Color coordinates L*, a* and b* significantly changed after the application of try-in pastes relative to baseline values, with a noticeable decrease in lightness (L*) (P < .05). A significant color change (∆E) was observed in all tested materials after cementation, with ∆E values exceeding 3.3 (P < .05). Although TP changed after cementation for most materials tested, these changes were not statistically significant (P > .05). Shofu and Dima ceramics showed the lowest TP values, while Aidite and Prettau showed the highest TP values. For e.max, translucency decreased after cementation with neutral and warm shades, and it significantly increased after cementation with a light shade. Conclusion. The shade of cement significantly altered the final color of the ceramic veneer material to a level above the threshold at which the clinical perception of color change occurred (> 3.3). The TP was not influenced by the cement shade. The translucency levels of the novel ultratranslucent multilayer monolithic zirconia ceramics Aidite and Prettau were higher than that of the lithium disilicate e.max material.
Abstract
Purpose. The purpose of this study was to assess the effect of resin cement shade on the color of different novel ultratranslucent monolithic zirconia and lithium disilicate veneer materials. Materials and methods. For a total of 40 specimens, flat cylindrical discs with a 9-mm diameter and 0.5-mm thickness were created using CAD/CAM technology. The specimens were divided into five groups according to their material (n = 8) (e.max, Prettau, Aidite, Shofu and Dima) using A1 shade. Resin discs with the same diameter and shade as the specimens served as tooth-colored substructures. Three shades (neutral, light and warm) of resin cement try-in pastes (Variolink Esthetic LC) were used as the luting cement material. The color of each material group was measured before and after cementation using the three cement shades, and the CIE L*a* b* coordinates were obtained with a spectrophotometer. Values for the translucency parameter (TP) and color change delta E (E) before (baseline) and after cementation of each specimen were determined. To compare differences among the material groups within each shade of cement and among various shades of cement within each material, the data were analyzed using one-way ANOVA and post hoc testing. Results. Color coordinates L*, a* and b* significantly changed after the application of try-in pastes relative to baseline values, with a noticeable decrease in lightness (L*) (P < .05). A significant color change (∆E) was observed in all tested materials after cementation, with ∆E values exceeding 3.3 (P < .05). Although TP changed after cementation for most materials tested, these changes were not statistically significant (P > .05). Shofu and Dima ceramics showed the lowest TP values, while Aidite and Prettau showed the highest TP values. For e.max, translucency decreased after cementation with neutral and warm shades, and it significantly increased after cementation with a light shade. Conclusion. The shade of cement significantly altered the final color of the ceramic veneer material to a level above the threshold at which the clinical perception of color change occurred (> 3.3). The TP was not influenced by the cement shade. The translucency levels of the novel ultratranslucent multilayer monolithic zirconia ceramics Aidite and Prettau were higher than that of the lithium disilicate e.max material.
참고문헌 (28)
- Gresnigt MMM, "Randomized clinical trial on indirect resin composite and ceramic laminate veneers : Up to 10-year findings", J Dent, 86, pp.102~109 (2019)
- Zhang Y, "Novel Zirconia Materials in Dentistry", J Dent Res, 97, pp.140~147 (2018)
- Nogueira AD, "The effect of a coupling medium on color and translucency of CAD-CAM ceramics", J Dent, 41(Suppl 3), pp.e18~23 (2013)
- Alrabeah G, "Effect of home bleaching on the optical properties and surface roughness of novel aesthetic dental ceramics", Coatings, 13, pp.330~ (2023)
- El-Sayed SM, "Color stability and fracture resistance of laminate veneers using different restorative materials and techniques", Egypt Dent J, 62, pp.1~15 (2016)
- Adel E, "Color stability and translucency of ceramic laminate veneer restoration for diastema closure: Effect of resin cement containing different photoinitiators", preprint, ~ (2022)
- Tabatabaian F, "Effect of ceramic thickness and cement type on the color match of high-translucency monolithic zirconia restorations", Int J Prosthodont, 34, pp.334~340 (2021)
- Miura S, "Effects of abutment tooth and luting agent colors on final color of high-translucent zirconia crowns", J Prosthodont Res, 66, pp.243~249 (2022)
- Ayash G, "Influence of resin cement shade on the color and translucency of zirconia crowns", J Clin Exp Dent, 12, pp.e257~63 (2020)
- Comba A, "Effects of substrate and cement shade on the translucency and color of CAD-CAM lithium-disilicate and zirconia ceramic materials", Polymers(Basel), 14, pp.1778~ (2022)
- Bayindir F, "The effect of restoration thickness and resin cement shade on the color and translucency of a high-translucency monolithic zirconia", J Prosthet Dent, 123, pp.149~154 (2020)
- Alrabeah G, "Evaluation of the effect of electronic cigarette devices", vape on the color of dental ceramics : an in vitro investigation, 2023, pp.16, 3977~
- Hardan L, "Novel trends in dental color match using different shade selection methods : a systematic review and meta-analysis", Materials(Basel), 15, pp.468~ (2022)
- Funt BV, "Metamer mismatching underlies color difference sensitivity", J Vis, 21, pp.11~ (2021)
- Lindsey DT, "Perceptibility and acceptability of CIELAB color differences in computer-simulated teeth", J Dent, 35, pp.593~599 (2007)
- Heffernan MJ, "Relative translucency of six all-ceramic systems. Part I: core materials", J Prosthet Dent, 88, pp.4~9 (2002)
- Ban S, "Classification and properties of dental zirconia as implant fixtures and superstructures", Materials(Basel), 14, pp.4879~ (2021)
- Ziyad TA, "Optical properties of CAD-CAM monolithic systems compared : three multi-layered zirconia and one lithium disilicate system", Heliyon, 7, pp.e08151~ (2021)
- Carrabba M, "Translucent zirconia in the ceramic scenario for monolithic restorations : A flexural strength and translucency comparison test", J Dent, 60, pp.70~76 (2017)
- Baldissara P, "Translucency of IPS e.max and cubic zirconia monolithic crowns", J Prosthet Dent, 120, pp.269~275 (2018)
- Kim HK, "Optical and mechanical properties of highly translucent dental zirconia", Materials(Basel), 13, pp.3395~ (2020)
- Czigola A, "Effects of substrate, ceramic thickness, translucency, and cement shade on the color of CADCAM lithium-disilicate crowns", J Esthet Restor Dent, 31, pp.457~464 (2019)
- Carrabba M, "Cement opacity and color as influencing factors on the final shade of metal-free ceramic restorations", J Esthet Restor Dent, 34, pp.423~429 (2022)
- Espíndola-Castro LF, "In vitro evaluation of physical and mechanical properties of light-curing resin cement : a comparative study", Eur J Dent, 14, pp.152~156 (2020)
- Ilie N, "Impact of light transmittance mode on polymerisation kinetics in bulk-fill resin-based composites", J Dent, 63, pp.51~59 (2017)
- Mazzitelli C, "Color stability of resin cements after water aging", Polymers(Basel), 15, pp.655~ (2023)
- Kilinc H, "Effect of sintering and aging processes on the mechanical and optical properties of translucent zirconia", J Prosthet Dent, 126, pp.129.e1~129.e7 (2021)
- Li S, "Effects of surface treatments and abutment shades on the final color of high-translucency self-glazed zirconia crowns", J Prosthet Dent, 126, pp.795.e1~795.e8 (2021)