Physical properties and color stability of injection-molded thermoplastic denture base resins
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
PURPOSE.The purpose of this study was to compare mechanical and physical properties of injection-molded thermoplastic denture base resins. MATERIALS AND METHODS. In this study, six commercially available products (VA; Valplast, LC; Lucitone, ST; Smiltone, ES; Estheshot-Bright, AC; Acrytone, WE; Weldenz) were selected from four types of thermoplastic denture base materials (Polyamide, Polyester, Acrylic resin and Polypropylene). The flexural properties and shore D hardness have been investigated and water sorption and solubility, and color stability have evaluated. RESULTS. For the flexural modulus value, ES showed the highest value and WE showed significantly lower value than all other groups (P<.05). Most of experimental groups showed weak color stability beyond the clinically acceptable range. CONCLUSION. Within the limits of this study, thermoplastic denture base resin did not show sufficient modulus to function as a denture base. In addition, all resins showed discoloration with clinical significance, and especially polyamides showed the lowest color stability. [ J Adv Prosthodont 2019;11:32-40]
Abstract
PURPOSE.The purpose of this study was to compare mechanical and physical properties of injection-molded thermoplastic denture base resins. MATERIALS AND METHODS. In this study, six commercially available products (VA; Valplast, LC; Lucitone, ST; Smiltone, ES; Estheshot-Bright, AC; Acrytone, WE; Weldenz) were selected from four types of thermoplastic denture base materials (Polyamide, Polyester, Acrylic resin and Polypropylene). The flexural properties and shore D hardness have been investigated and water sorption and solubility, and color stability have evaluated. RESULTS. For the flexural modulus value, ES showed the highest value and WE showed significantly lower value than all other groups (P<.05). Most of experimental groups showed weak color stability beyond the clinically acceptable range. CONCLUSION. Within the limits of this study, thermoplastic denture base resin did not show sufficient modulus to function as a denture base. In addition, all resins showed discoloration with clinical significance, and especially polyamides showed the lowest color stability. [ J Adv Prosthodont 2019;11:32-40]
참고문헌 (24)
- Takabayashi Y, "Characteristics of denture thermoplastic resins for non-metal clasp dentures", Dent Mater J, 29, pp.353~361 (2010)
- Hamanaka I, "Mechanical properties of injection-molded thermoplastic denture base resins", Acta Odontol Scand, 69, pp.75~79 (2011)
- Katsumata Y, "Bonding strength of autopolymerizing resin to nylon denture base polymer", Dent Mater J, 28, pp.409~418 (2009)
- Kuwahara K, "A case of using non-metal clasp partial denture for the patient with metal allergy", Nihon University J Oral Sci, 30, pp.134~139 (2004)
- Fueki K, "Clinical application of removable partial dentures using thermoplastic resin. Part II:Material properties and clinical features of non-metal clasp dentures", J Prosthodont Res, 58, pp.71~84 (2014)
- Hamanaka I, "Properties of injection-molded thermoplastic polyester denture base resins", Acta Odontol Scand, 72, pp.139~144 (2014)
- Shuturminskiy V, "The study of the condition of the oral prosthesis field epithelium in persons wearing dentures of polypropylene and acrylic bases", Georgian Med News, 225, pp.36~40 (2013)
- Vojdani M, "Polyamide as a denture base material: A literature review", J Dent (Shiraz), 16, pp.1~9 (2015)
- "ISO 1567. Dentistry-Denture base polymers", International Standards Organization (ISO), ~ (2005)
- "ISO 868. Plastics and ebonite - Determination of indentation hardness by means of a durometer(Shore hardness)", International Standards Organization (ISO), ~ (2003)
- Swaney AC, "American dental association specification No. 12 for denture base resin: Second revision", J Am Dent Assoc, 46, pp.54~66 (1953)
- 강은숙, "의치상 직접 이장레진의 색조 안정성", 대한치과보철학회지, 41(2), pp.160~168 (2003), 대한치과보철학회
- Takahashi H, "Basic properties of thermoplastic resins for denture base material referred to non clasp denture", J Jpn Dent Mater, 28, pp.161~167 (2009)
- Hamanaka I, "Properties of denture base resins for nonclasp denture", Ann Jpn Prosthodont Soc, 4, pp.156~ (2012)
- Miettinen VM, "Water sorption and solubility of glass fiber-reinforced denture polymethyl methacrylate resin", J Prosthet Dent, 77, pp.531~534 (1997)
- Katsumata Y, "Mechanical characterization of a flexible nylon denture base material", Bull Kanagawa Dent Col, 35, pp.177~182 (2007)
- Hunter R, "Accuracy, precision, and stability of new photo-electric color-difference meter", JOSA, 38, pp.1094~ (1948)
- Esquivel JF, "Color stability of low-fusing porcelains for titanium", Int J Prosthodont, 8, pp.479~485 (1995)
- Seghi RR, "Spectrophotometric analysis of color differences between porcelain systems", J Prosthet Dent, 56, pp.35~40 (1986)
- Gross MD, "A colorimetric study of coffee and tea staining of four composite resins", J Oral Rehabil, 4, pp.311~322 (1977)
- Ruyter IE, "Color stability of dental composite resin materials for crown and bridge veneers", Dent Mater, 3, pp.246~251 (1987)
- Buyukyilmaz S, "Color stability of denture base polymers", Int J Prosthodont, 7, pp.372~382 (1994)
- Eldiwany M, "Color stability of lightcured and post-cured composites", Am J Dent, 8, pp.179~181 (1995)
- Goldstein GR, "Repeatability of a specially designed intraoral colorimeter", J Prosthet Dent, 69, pp.616~619 (1993)