Shear bond strengths of aged and non-aged CAD/CAM materials after different surface treatments
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. To assess shear bond strengths (SBS) of resin composites on aged and non-aged prosthetic materials with various surface treatments. MATERIALS AND METHODS. Cerasmart (CE), Vita Enamic (VE), Vita Mark II (VM), and IPS e.max CAD (EC) blocks were sliced, and rectangular-shaped specimens (14 × 12 × 1.5 mm; N = 352) were obtained. Half of the specimens were aged (5000 thermal cycles) for each material. Non-aged and aged specimens were divided into 4 groups according to the surface treatments (control, air abrasion, etching, and laser irradiation; n = 11) and processed for scanning electron microscopy (SEM). The repair procedure was performed after the surface treatments. SBS values and failure types were determined. Obtained data were statistically analyzed (P≤.05). RESULTS. The material type, surface treatment type, and their interactions were found significant with regard to SBS (P<.001). Aging also had a significant effect on prosthetic material-resin composite bonding (P<.001). SBS values of non-aged specimens ranged from 12.16 to 17.91 MPa, while SBS values of aged specimens ranged from 9.46 to 15.61 MPa. Non-aged VM in combination with acid etching presented the highest score while the control group of aged CE showed the lowest. CONCLUSION. Etching was more effective in achieving durable SBS for VM and EC. Laser irradiation could be considered as an alternative surface treatment method to air abrasion for all tested materials. Aging had significant effect on SBS values generated between tested materials and resin composite.
Abstract
PURPOSE. To assess shear bond strengths (SBS) of resin composites on aged and non-aged prosthetic materials with various surface treatments. MATERIALS AND METHODS. Cerasmart (CE), Vita Enamic (VE), Vita Mark II (VM), and IPS e.max CAD (EC) blocks were sliced, and rectangular-shaped specimens (14 × 12 × 1.5 mm; N = 352) were obtained. Half of the specimens were aged (5000 thermal cycles) for each material. Non-aged and aged specimens were divided into 4 groups according to the surface treatments (control, air abrasion, etching, and laser irradiation; n = 11) and processed for scanning electron microscopy (SEM). The repair procedure was performed after the surface treatments. SBS values and failure types were determined. Obtained data were statistically analyzed (P≤.05). RESULTS. The material type, surface treatment type, and their interactions were found significant with regard to SBS (P<.001). Aging also had a significant effect on prosthetic material-resin composite bonding (P<.001). SBS values of non-aged specimens ranged from 12.16 to 17.91 MPa, while SBS values of aged specimens ranged from 9.46 to 15.61 MPa. Non-aged VM in combination with acid etching presented the highest score while the control group of aged CE showed the lowest. CONCLUSION. Etching was more effective in achieving durable SBS for VM and EC. Laser irradiation could be considered as an alternative surface treatment method to air abrasion for all tested materials. Aging had significant effect on SBS values generated between tested materials and resin composite.
참고문헌 (38)
- Elsaka SE, "Mechanical properties of zirconia reinforced lithium silicate glass-ceramic", Dent Mater, 32, pp.908~914 (2016)
- Kilinc H, "Optical behaviors of esthetic CAD-CAM restorations after different surface finishing and polishing procedures and UV aging : An in vitro study", J Prosthet Dent, 120, pp.107~113 (2018)
- Fasbinder DJ, "Materials for chairside CAD", CAM restorations, 2010, pp.31, 702~709
- Spitznagel FA, "Resin bond to indirect composite and new ceramic", polymer materials : a review of the literature, 2014, pp.26, 382~393
- El Zhawi H, "Polymer infiltrated ceramic network structures for resistance to fatigue fracture and wear", Dent Mater, 32, pp.1352~1361 (2016)
- Michele Carrabba, "Comparison of traditional and simplified methods for repairing CAD", CAM feldspathic ceramics, 2017, pp.9(4), 257~264[DOI]
- Baldissara P, "Translucency of IPS e.max and cubic zirconia monolithic crowns", J Prosthet Dent, 120, pp.269~275 (2018)
- Lawson NC, "Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing", J Dent, 42, pp.1586~1591 (2014)
- D’Arcangelo C, "Wear properties of a novel resin composite compared to human enamel and other restorative materials", Oper Dent, 39, pp.612~618 (2014)
- Elsaka SE, "Repair bond strength of resin composite to a novel CAD", CAM hybrid ceramic using different repair systems, 2015, pp.34, 161~167
- Üstün Ö, "Shear Bond Strength of Repair Systems to New CAD", CAM Restorative Materials, 2018, pp.27, 748~754
- Merve Bankoğlu Güngör, "Effect of surface treatments on shear bond strength of resin composite bonded to CAD", CAM resin-ceramic hybrid materials, 2016, pp.8(4), 259~266[DOI]
- Stawarczyk B, "Tensile bond strength of resin composite repair in vitro using different surface preparation conditionings to an aged CAD", CAM resin nanoceramic, 2015, pp.19, 299~308
- 정기원, "Influence of surface treatments and repair materials on the shear bond strength of CAD", CAM provisional restorations, 2019, pp.11(2), 95~104[DOI]
- Meryem Gulce Subası, "Repair bond strengths of non-aged and aged resin nanoceramics", The Journal of Advanced of Prosthodontics, 9(5), pp.364~370 (2017), 대한치과보철학회[DOI]
- Puppin-Rontani J, "Effect of hydrofluoric acid concentration and etching time on bond strength to lithium disilicate glass ceramic", Oper Dent, 42, pp.606~615 (2017)
- Klosa K, "Long-term bond of glass ceramic and resin cement : evaluation of titanium tetrafluoride as an alternative etching agent for lithium disilicate ceramics", J Adhes Dent, 15, pp.377~383 (2013)
- Chen JH, "Effect of etchant, etching period, and silane priming on bond strength to porcelain of composite resin", Oper Dent, 23, pp.250~257 (1998)
- Vohra F, "Influence of Er;Cr : YSGG laser on shear bond strength and color stability of lithium disilicate ceramics : an in vitro study", Photobiomodul Photomed Laser Surg, 37, pp.483~488 (2019)
- Tokar E, "Repair bond strength of composite to Er,Cr:YSGG laser irradiated zirconia and porcelain surfaces", Biomed J, 42, pp.193~199 (2019)
- Kurtulmus-Yilmaz S, "The effect of surface treatments on the mechanical and optical behaviors of CAD", CAM restorative materials, 2019, pp.28, e496~e503
- Coldea A, "Mechanical properties of polymer-infiltrated-ceramic-network materials", Dent Mater, 29, pp.419~426 (2013)
- Morresi AL, "Thermal cycling for restorative materials : Does a standardized protocol exist in laboratory testing? A literature review", J Mech Behav Biomed Mater, 29, pp.295~308 (2014)
- Cho SD, "Effect of Er, Cr : YSGG laser, air abrasion, and silane application on repaired shear bond strength of composites", Oper Dent, 38, pp.e1~e9 (2013)
- Serkan Çınar, "Repair bond strength of composite resin to zirconia restorations after different thermal cycles", The Journal of Advanced of Prosthodontics, 11(5), pp.297~304 (2019), 대한치과보철학회[DOI]
- Wiegand A, "Repairability of CAD", CAM high-density PMMA-and composite-based polymers, 2015, pp.19, 2007~2013
- Silva PNFD, "Bond strength between a polymer-infiltrated ceramic network and a composite for repair : effect of several ceramic surface treatments", Braz Oral Res, 32, pp.e28~ (2018)
- D’Arcangelo C, "Effect of three surface treatments on the adhesive properties of indirect composite restorations", J Adhes Dent, 9, pp.319~326 (2007)
- Marshall SJ, "A review of adhesion science", Dent Mater, 26, pp.e11~e16 (2010)
- Naves LZ, "Surface", interface morphology and bond strength to glass ceramic etched for different periods, 2010, pp.35, 420~427
- Stawarczyk B, "Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD", CAM composites, 2015, pp.55, 1~11
- Lawson NC, "Wear, strength, modulus and hardness of CAD", CAM restorative materials, 2016, pp.32, e275~e283
- Lauvahutanon S, "In vitro evaluation of the wear resistance of composite resin blocks for CAD", CAM, 2015, pp.34, 495~502
- Hibst R, "Experimental studies of the application of the Er:YAG laser on dental hard substances: I. Measurement of the ablation rate", Lasers Surg Med, 9, pp.338~344 (1989)
- Ozarslan MM, "Assessment the bond strength of ceramic brackets to CAD", CAM nanoceramic composite and interpenetrating network composite after different surface treatments, 2018, pp.30, 1871598~
- Hou Y, "Shear bond strength of different CAD", CAM ceramics : acid vs Er : YAG laser etching, 2018, pp.36, 614~620
- Alp G, "Effect of different resin cements and surface treatments on the shear bond strength of ceramic-glass polymer materials", J Prosthet Dent, 120, pp.454~461 (2018)
- Ugur Erdemir, "Shear bond strength of a new selfadhering flowable composite resin for lithium disilicate-reinforced CAD", CAM ceramic material, 2014, pp.6(6), 434~443[DOI]