In vitro comparison of two different materials for the repair of urethan dimethacrylate denture bases
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
PURPOSE. The purpose of this in vitro study was to investigate the flexural properties of a recently introduced urethane dimethacrylate denture base material (Eclipse) after being repaired with two different materials. MATERIALS AND METHODS. Two repair groups and a control group consisting of 10 specimens each were generated. The ES group was repaired with auto-polymerizing polymer. The EE group was repaired with the Eclipse. The E group was left intact as a control group. A 3-point bending test device which was set to travel at a crosshead speed of 5 mm/min was used. Specimens were loaded until fracture occurred and the mean displacement, maximum load, flexural modulus and flexural strength values and standard deviations were calculated for each group and the data were statistically analyzed. The results were assessed at a significance level of P<.05. RESULTS. The mean “isplacement” “aximum load before fracture” flexural strength”and “lexural modulus”rates of Group E were statistically significant higher than those of Groups ES and EE, but no significant difference (P>.05) was found between the mean values of Group ES and EE. There was a statistically significant positive relation (P<.01) between the displacement and maximum load of Group ES (99.5%), Group EE (94.3%) and Group E (84.4%). CONCLUSION. The more economic and commonly used self-curing acrylic resin can be recommended as an alternative repair material for Eclipse denture bases.
Abstract
PURPOSE. The purpose of this in vitro study was to investigate the flexural properties of a recently introduced urethane dimethacrylate denture base material (Eclipse) after being repaired with two different materials. MATERIALS AND METHODS. Two repair groups and a control group consisting of 10 specimens each were generated. The ES group was repaired with auto-polymerizing polymer. The EE group was repaired with the Eclipse. The E group was left intact as a control group. A 3-point bending test device which was set to travel at a crosshead speed of 5 mm/min was used. Specimens were loaded until fracture occurred and the mean displacement, maximum load, flexural modulus and flexural strength values and standard deviations were calculated for each group and the data were statistically analyzed. The results were assessed at a significance level of P<.05. RESULTS. The mean “isplacement” “aximum load before fracture” flexural strength”and “lexural modulus”rates of Group E were statistically significant higher than those of Groups ES and EE, but no significant difference (P>.05) was found between the mean values of Group ES and EE. There was a statistically significant positive relation (P<.01) between the displacement and maximum load of Group ES (99.5%), Group EE (94.3%) and Group E (84.4%). CONCLUSION. The more economic and commonly used self-curing acrylic resin can be recommended as an alternative repair material for Eclipse denture bases.
참고문헌 (43)
- Diwan R, "Materials Prescribed in the Management of Edentulous Patients. In Prosthodontic treatment for edentulous Patients:complete dentures and implant-supported prostheses", pp.190~207 (2004), Mosby
- Meng TR Jr, "Physical properties of four acrylic denture base resins", J Contemp Dent Pract, 6, pp.93~100 (2005)
- Murray MD, "The evolution of the complete denture base. Theories of complete denture retention-a review. Part 1", Aust Dent J, 38, pp.216~219 (1993)
- Parvizi A, "Comparison of the dimensional accuracy of injection-molded denture base materials to that of conventional pressure-pack acrylic resin", J Prosthodont, 13, pp.83~89 (2004), J Prosthodont
- Pfeiffer P, "Residual methyl methacrylate monomer, water sorption, and water solubility of hypoallergenic denture base materials", J Prosthet Dent, 92, pp.72~78 (2004)
- Price CA, "A history of dental polymers", Aust Prosthodont J, 8, pp.47~54 (1994)
- Dar-Odeh NS, "An evaluation of self-cured and visible light-cured denture base materials when used as a denture base repair material", J Oral Rehabil, 24, pp.755~760 (1997)
- Polyzois GL, "Fracture force, deflection at fracture, and toughness of repaired denture resin subjected to microwave polymerization or reinforced with wire or glass fiber", J Prosthet Dent, 86, pp.613~619 (2001)
- Vallittu PK, "Evaluation of damage to removable dentures in two cities in Finland", Acta Odontol Scand, 51(363), pp.363~369 (1993)
- Beyli MS, "An analysis of causes of fracture of acrylic resin dentures", J Prosthet Dent, 46, pp.238~241 (1981)
- Darbar UR, "Denture fracture-a survey", Br Dent J, 176, pp.342~345 (1994)
- McCabe JF, "Alternative approaches to evaluating the fatigue characteristics of materials", Dent Mater, 6, pp.24~28 (1990)
- Diaz-Arnold AM, "Flexural and fatigue strengths of denture base resin", J Prosthet Dent, 100, pp.47~51 (2008)
- Rodford RA, "Further development and evaluation of high impact strength denture base materials", J Dent, 18, pp.151~157 (1990)
- Rodford RA, "Further observations on high impact strength denture-base materials", Biomaterials, 13, pp.726~728 (1992)
- Machado C, "Comparative study of the transverse strength of three denture base materials", J Dent, 35, pp.930~933 (2007)
- Radzi Z, "Impact strength of an experimental polyurethane-based polymer", Annal Dent Univ Malaya, 14, pp.46~51 (2007)
- Machado AL, "Effect of thermocycling on the flexural and impact strength of urethane-based and high-impact denture base resins", Gerodontology, 29, pp.318~323 (2012)
- Andreopoulos AG, "Repair of denture base resins using visible light-cured materials", J Prosthet Dent, 72, pp.462~468 (1994)
- Thean HP, "An evaluation of bond strengths of denture repair resins by a torsional method", Aust Dent J, 43, pp.5~8 (1998)
- Beyli MS, "Repair of fractured acrylic resin", J Prosthet Dent, 44, pp.497~503 (1980)
- Ward JE, "Effect of repair surface design, repair material, and processing method on the transverse strength of repaired acrylic denture resin", WJ Prosthet Dent, 67, pp.815~820 (1992)
- Vallittu PK, "Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat-polymerized resin", J Prosthet Dent, 72, pp.639~643 (1994)
- Zappini G, "Wachter W. Comparison of fracture tests of denture base materials", J Prosthet Dent, 90, pp.578~585 (2003)
- Uzun G, "Comparison of the fracture resistance of six denture base acrylic resins", J Biomater Appl, 17, pp.19~29 (2002)
- Phoenix RD, "Evaluation of mechanical and thermal properties of commonly used denture base resins", J Prosthodont, 13, pp.17~27 (2004)
- Tirapelli C, "Fiber-reinforced composites: effect of fiber position, fiber framework, and wetting agent on flexural strength", Int J Prosthodont, 18, pp.201~202 (2005)
- Ogle RE, "A new visible light-cured resin system applied to removable prosthodontics", J Prosthet Dent, 56, pp.497~506 (1986)
- Fellman S, "Visible light-cured denture base resin used in making dentures with conventional teeth", J Prosthet Dent, 62, pp.356~359 (1989), J Prosthet Dent
- Khan Z, "One-appointment construction of an immediate transitional complete denture using visible lightcured resin", J Prosthet Dent, 68, pp.500~502 (1992)
- Khan Z, "The staining characteristics, transverse strength, and microhardness of a visible light-cured denture base material", J Prosthet Dent, 57, pp.384~386 (1987)
- Tan HK, "Adaptation of a visible light-cured denture base material", J Prosthet Dent, 61, pp.326~331 (1989)
- Nishigawa G, "Suzuki K. Effect of plasma treatment on adhesion of self-curing repair resin to acrylic denture base", Dent Mater J, 23, pp.545~549 (2004)
- Yunus N, "Abu-Hassan MI. Some flexural properties of a nylon denture base polymer", J Oral Rehabil, 32, pp.65~71 (2005)
- Hedzelek W, "Comparison of mechanical strength of palatal denture bases made from various plastic materials", Int J Prosthodont, 19, pp.193~194 (2006)
- Nakamura M, "Reinforcement of denture base resin with short-rod glass fiber", Dent Mater J, 26, pp.733~738 (2007)
- Gonda T, "MacEntee MI. Fracture incidence in mandibular overdentures retained by one or two implants", J Prosthet Dent, 103, pp.178~181 (2010)
- Pfeiffer P, "Repair strength of hypoallergenic denture base materials", J Prosthet Dent, 100, pp.292~301 (2008)
- Kostoulas I, "Fracture force, deflection, and toughness of acrylic denture repairs involving glass fiber reinforcement", J Prosthodont, 17, pp.257~261 (2008)
- Faot F, "Strength of denture base resins repaired with auto- and visible light-polymerized materials", J Prosthodont, 18, pp.496~502 (2009)
- Rached RN, "Repair strength of autopolymerizing, microwave, and conventional heat-polymerized acrylic resins", J Prosthet Dent, 92, pp.79~82 (2004)
- Minami H, "Flexural strengths of denture base resin repaired with autopolymerizing resin and reinforcements after thermocycle stressing", J Prosthodont, 14, pp.12~18 (2005)
- Johnston EP, "Flexure fatigue of 10commonly used denture base resins", J Prosthet Dent, 46, pp.478~483 (1981)