Microshear bond strength according to dentin cleansing methods before recementation

키워드

참고문헌 (48)

1. Prata RA., "Effect of ‘Try-in’ paste removal method on bond strength to lithium disilicate ceramic", J Dent, 39, pp.863~870 (2011)
2. Tanumiharja M., "Microtensile bond strengths of seven dentin adhesive systems", Dent Mater, 16, pp.180~187 (2000)
3. Sümer E., "Contemporary permanent luting agents used in dentistry : A literature review", Int Dent Res, 1, pp.26~31 (2011)
4. Langer A., "Dentin infiltration ability of different classes of adhesive systems", Clin Oral Investig, 17, pp.205~216 (2013)
5. Lohbauer U., "Resin tags do not contribute to dentin adhesion in self-etching adhesives", J Adhes Dent, 10, pp.97~103 (2008)
6. Giachetti L., "Investigation into the nature of dentin resin tags : a scanning electron microscopic morphological analysis of demineralized bonded dentin", J Prosthet Dent, 92, pp.233~238 (2004)
7. Tao L., "Shear bond strengths to dentin : effects of surface treatments, depth and position", Dent Mater, 4, pp.371~378 (1988)
8. Van Meerbeek B., "Morphological aspects of the resin-dentin interdiffusion zone with different dentin adhesive systems", J Dent Res, 71, pp.1530~1540 (1992)
9. Gwinnett AJ., "Quantitative contribution of resin infiltration", hybridization to dentin bonding, 1993, pp.6, 7~9
10. Nakabayashi N., "Bonding of restorative materials to dentine : the present status in Japan", Int Dent J, 35, pp.145~154 (1985)
11. Obeidi A., "Acidetch interval and shear bond strength of Er, Cr : YSGG laserprepared enamel and dentin", Lasers Med Sci, 25, pp.363~369 (2010)
12. Altintas SH., "Effect of provisional cements on shear bond strength of porcelain laminate veneers", Eur J Dent, 5, pp.373~379 (2011)
13. Santos MJ., "Effect of dentin-cleaning techniques on the shear bond strength of selfadhesive resin luting cement to dentin", Oper Dent, 36, pp.512~520 (2011)
14. Adebayo OA., "Dentine bonding after CPP-ACP paste treatment with and without conditioning", J Dent, 36, pp.1013~1024 (2008)
15. Dilipkumar Munirathinam, "Efficacy of various cleansing techniques on dentin wettability and its influence on shear bond strength of a resin luting agent", The Journal of Advanced of Prosthodontics, 4(3), pp.139~145 (2012), 대한치과보철학회
16. Grasso CA., "In vivo evaluation of three cleansing techniques for prepared abutment teeth", J Prosthet Dent, 88, pp.437~441 (2002)
17. Roberts S., "The efficacy of different sealer removal protocols on bonding of self-etching adhesives to AH plus-contaminated dentin", J Endod, 35, pp.563~567 (2009)
18. Usumez A., "Bond strengths of porcelain laminate veneers to tooth surfaces prepared with acid and Er, Cr : YSGG laser etching", J Prosthet Dent, 90, pp.24~30 (2003)
19. Chou JC., "Effect of Er, Cr : YSGG laser parameters on shear bond strength and microstructure of dentine", Photomed Laser Surg, 27, pp.481~486 (2009)
20. Jaberi Ansari Z., "The effect of an Er, Cr : YSGG laser on the micro-shear bond strength of composite to the enamel and dentin of human permanent teeth", Lasers Med Sci, 27, pp.761~765 (2012)
21. Gurgan S., "Shear bond strength of composite bonded to Er, Cr : YSGG laser-prepared dentin", Photomed Laser Surg, 26, pp.495~500 (2008)
22. Cvikl B., "The impact of Er, Cr : YSGG laser on the shear strength of the bond between dentin and ceramic is dependent on the adhesive material", Lasers Med Sci, 27, pp.717~722 (2012)
23. Lin S., "Topographical characteristics and shear bond strength of tooth surfaces cut with a laser-powered hydrokinetic system", J Prosthet Dent, 82, pp.451~455 (1999)
24. Ishida K., "Shear bond strength of rebonded brackets after removal of adhesives with Er, Cr : YSGG laser", Odontology, 99, pp.129~134 (2011)
25. Ahrari F., "The efficacy of Er, Cr : YSGG laser in reconditioning of metallic orthodontic brackets", Photomed Laser Surg, 30, pp.41~46 (2012)
26. Ahrari F., "Reconditioning of ceramic orthodontic brackets with an Er, Cr : YSGG laser", Lasers Med Sci, 28, pp.223~228 (2013)
27. Bishara SE., "The effect of repeated bonding on the shear bond strength of a composite resin orthodontic adhesive", Angle Orthod, 70, pp.435~441 (2000)
28. Andrade AM., "Do the microshear test variables affect the bond strength values?", Int J Dent, 2012, pp.618960~ (2012)
29. Armstrong S., "Adhesion to tooth structure: a critical review of “micro” bond strength test methods", Dent Mater, 26, pp.e50~e62 (2010)
30. Toba S., "Micro-shear bond strengths of adhesive resins to coronal dentin versus the floor of the pulp chamber", Am J Dent, 16, pp.51A~56A (2003)
31. Shabka AA., "An investigation on the shear bond strength of one dentin adhesive at two different dentin depths", Egypt Dent J, 41, pp.1031~1034 (1995)
32. Pashley EL., "Bond strengths to superficial, intermediate and deep dentin in vivo with four dentin bonding systems", Dent Mater, 9, pp.19~22 (1993)
33. Burrow MF., "The influence of age and depth of dentin on bonding", Dent Mater, 10, pp.241~246 (1994)
34. Giannini M., "Effect of tooth age on bond strength to dentin", J Appl Oral Sci, 11, pp.342~347 (2003)
35. Brackett WW., "The effect of subject age on the microtensile bond strengths of a resin and a resin-modified glass ionomer adhesive to tooth structure", Oper Dent, 33, pp.282~286 (2008)
36. International Organization For Standardization., "Dental materials-Guidance on testing of adhesion to tooth structure", ISO TR 11405, ~ (1994)
37. Fawzi EM., "Bonding strategies to pulp chamber dentin treated with different endodontic irrigants : microshear bond strength testing and SEM analysis", J Adhes Dent, 12, pp.63~70 (2010)
38. 김덕수, "Effect of EDTA treatment on the hybrid layer durability in total-etch dentin adhesives", DENTAL MATERIALS JOURNAL, 30(5), pp.717~722 (2011), JAPANESE SOC DENTAL MATERIALS DEVICES
39. Shokouhinejad N., "Push-out bond strength of Resilon", Epiphany self-etch to intraradicular dentin after retreatment : a preliminary study, 2010, pp.36, 493~496
40. Gambrel MG., "The effect of endodontic solutions on resorcinol-formalin paste in teeth", J Endod, 31, pp.25~29 (2005)
41. Ramzi H., "Efficacy of Three Different Methods in the Retreatment of Root Canals Filled with Resilon", Epiphany SE, 2010, pp.5, 161~166
42. Vranas RN., "The effect of endodontic solutions on resorcinol-formalin paste", J Endod, 29, pp.69~72 (2003)
43. George JD., "Evaluation of the developmental toxicity of formamide in New Zealand white rabbits", Toxicol Sci, 69, pp.165~174 (2002)
44. Başaran EG., "Influence of different power outputs of erbium, chromium : yttrium-scandium-gallium-garnet laser and acid etching on shear bond strengths of a dual-cure resin cement to enamel", Lasers Med Sci, 26, pp.13~19 (2011)
45. Apel C., "The ablation threshold of Er : YAG and Er : YSGG laser radiation in dental enamel", Lasers Med Sci, 17, pp.246~252 (2002)
46. Ergücü Z., "Effect of Er, Cr : YSGG laser on the microtensile bond strength of two different adhesives to the sound and caries-affected dentin", Oper Dent, 34, pp.460~466 (2009)
47. Lee BS., "Tensile bond strength of Er, Cr : YSGG laser-irradiated human dentin and analysis of dentin-resin interface", Dent Mater, 23, pp.570~578 (2007)
48. Moretto SG., "Effects of ultramorphological changes on adhesion to lased dentin-Scanning electron microscopy and transmission electron microscopy analysis", Microsc Res Tech, 74, pp.720~726 (2011)

관련 논문AI추천