Efficacy of various cleansing techniques on dentin wettability and its influence on shear bond strength of a resin luting agent
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
PURPOSE. To evaluate the shear bond strength of resin luting agent to dentin surfaces cleansed with different agents like pumice, ultrasonic scaler with chlorhexidine gluconate, EDTA and the influence of these cleansing methods on wetting properties of the dentin by Axisymmetric drop Shape Analysis - Contact Diameter technique (ADSA-CD). MATERIALS AND METHODS. Forty coronal portions of human third molar were prepared until dentin was exposed. Specimens were divided into two groups: Group A and Group B. Provisional restorations made with autopolymerizing resin were luted to dentin surface with zinc oxide eugenol in Group A and with freegenol cement in Group B. All specimens were stored in distilled water at room temperature for 24 hrs and provisional cements were mechanically removed with explorer and rinsed with water and cleansed using various methods (Control-air-water spray, Pumice prophylaxis, Ultrasonic scaler with 0.2% Chlorhexidine gluconate, 17% EDTA). Contact angle measurements were performed to assess wettability of various cleansing agents using the ADSA-CD technique. Bond strength of a resin luting agent bonded to the cleansed surface was assessed using Instron testing machine and the mode of failure noted. SEM was done to assess the surface cleanliness. Data were statistically analyzed by one-way analysis of variance with Tukey HSD tests (alpha=.05). RESULTS. Specimens treated with EDTA showed the highest shear bond strength and the lowest contact angle for both groups. SEM showed that EDTA was the most effective solution to remove the smear layer. Also, mode of failure seen was predominantly cohesive for both EDTA and pumice prophylaxis. CONCLUSION. EDTA was the most effective dentin cleansing agent among the compared groups.
Abstract
PURPOSE. To evaluate the shear bond strength of resin luting agent to dentin surfaces cleansed with different agents like pumice, ultrasonic scaler with chlorhexidine gluconate, EDTA and the influence of these cleansing methods on wetting properties of the dentin by Axisymmetric drop Shape Analysis - Contact Diameter technique (ADSA-CD). MATERIALS AND METHODS. Forty coronal portions of human third molar were prepared until dentin was exposed. Specimens were divided into two groups: Group A and Group B. Provisional restorations made with autopolymerizing resin were luted to dentin surface with zinc oxide eugenol in Group A and with freegenol cement in Group B. All specimens were stored in distilled water at room temperature for 24 hrs and provisional cements were mechanically removed with explorer and rinsed with water and cleansed using various methods (Control-air-water spray, Pumice prophylaxis, Ultrasonic scaler with 0.2% Chlorhexidine gluconate, 17% EDTA). Contact angle measurements were performed to assess wettability of various cleansing agents using the ADSA-CD technique. Bond strength of a resin luting agent bonded to the cleansed surface was assessed using Instron testing machine and the mode of failure noted. SEM was done to assess the surface cleanliness. Data were statistically analyzed by one-way analysis of variance with Tukey HSD tests (alpha=.05). RESULTS. Specimens treated with EDTA showed the highest shear bond strength and the lowest contact angle for both groups. SEM showed that EDTA was the most effective solution to remove the smear layer. Also, mode of failure seen was predominantly cohesive for both EDTA and pumice prophylaxis. CONCLUSION. EDTA was the most effective dentin cleansing agent among the compared groups.
참고문헌 (21)
- Ayad MF, "Surface roughness of dentin after tooth preparation with different rotary instrumentation", J Prosthet Dent, 75, pp.122~128 (1996)
- Terata R., "Characterization of enamel and dentin surfaces after removal of temporary cement-study on removal of temporary ce-ment", Dent Mater J, 12, pp.18~28 (1993)
- Grasso CA, "In vivo evaluation of three cleansing techniques for prepared abutment teeth", J Prosthet Dent, 88, pp.437~441 (2002)
- Hu¨lsmann M, "Chelating agents in root canal treatment: mode of action and indications for their use", Int Endod J, 36, pp.810~830 (2003)
- Rosales-Leal JI, "Influence of eugenol contamination on the wetting of ground and etched dentin", Oper Dent, 28, pp.695~699 (2003)
- Sarac D, "Effect of the dentin cleansing techniques on dentin wetting and on the bond strength of a resin luting agent", J Prosthet Dent, 94, pp.363~369 (2005)
- Hansen EK, "Influence of temporary filling materials on effect of dentin bonding agents", Scand J Dent Res, 95, pp.516~520 (1987)
- Meyerowitz JM, "The effect of eugenol containing and non-eugenol temporary cements on the resin-enamel bond", J Dent Assoc S Afr, 49, pp.389~392 (1994)
- Ngoh EC, "Effects of eugenol on resin bond strengths to root canal dentin", J Endod, 27, pp.411~414 (2001)
- Yap AU, "Influence of eugenol-containing temporary restorations on bond strength of composite to dentin", Oper Dent, 26, pp.556~561 (2001)
- Kielbassa AM, "Diffusion behavior of eugenol from zinc oxide-eugenol mixtures through human and bovine dentin in vitro", Oper Dent, 22, pp.15~20 (1997)
- Duke ES, "Effects of various agents in cleaning cut dentine", J Oral Rehabil, 12, pp.295~302 (1985)
- Takeda FH, "A comparative study of the removal of smear layer by three endodontic irrigants and two types of laser", Int Endod J, 32, pp.32~39 (1999)
- Peters O, "Effect of eugenol-containing sealer on marginal adaptation of dentine-bonded resin fillings", Int Endod J, 33, pp.53~59 (2000)
- Abbott PV, "An SEM study of the effects of different irrigation sequences and ultrasonics", Int Endod J, 24, pp.308~316 (1991)
- Bra¨nnstro¨m M, "The effect of EDTAcontaining surface-active solutions on the morphology of prepared dentin: an in vivo study", J Dent Res, 59, pp.1127~1131 (1980)
- Cameron JA., "Factors affecting the clinical efficiency of ultrasonic endodontics: a scanning electron microscopy study", Int Endod J, 28, pp.47~53 (1995)
- Braga RR, "Pilot study on the early shear strength of porcelain-dentin bonding using dual-cure cements", J Prosthet Dent, 81, pp.285~289 (1999)
- Lafuente JD, "Bond strength of dual-cured resin cements to human teeth", J Esthet Dent, 12, pp.105~110 (2000)
- Bayindir F, "Effect of eugenol and noneugenol containing temporary cement on permanent cement retention and microhardness of cured composite resin", Dent Mater J, 22, pp.592~599 (2003)
- Van Meerbeek B, "Morphological aspects of the resin-dentin interdiffusion zone with different dentin adhesive systems", J Dent Res, 71, pp.1530~1540 (1992)