The effects of dentin bonding agent formulas on their polymerization quality, and together with tooth tissues on their microleakage and shear bond strength: an explorative 3-step experiment
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
PURPOSE. Bonding agents (BA) are the crucial weak link of composite restorations. Since the commercial materials’ compositions are not disclosed, studies to formulize the optimum ratios of different components are of value. The aim of this study was to find a proper formula of BAs. MATERIALS AND METHODS. This explorative experimental in vitro study was composed of 4 different sets of extensive experiments. A commercial BA and 7 experimental formulas were compared in terms of degree of conversion (5 experimental formulas), shear bond strength, mode of failure, and microleakage (3 experimental formulas). Statistical analyses were performed (α=.05). The DC of selected formula was tested one year later. RESULTS. The two-way ANOVA indicated a significant difference between the shear bond strength (SBS) of two tissues (dentin vs. enamel, P=.0001) in a way that dentinal bonds were weaker. However, there was no difference between the four materials (P=.283). The adhesive mode of failure was predominant in all groups. No differences between the microleakage of the four materials at occlusal (P=.788) or gingival (P=.508) sites were detected (Kruskal-Wallis). The Mann-Whitney U test showed a significant difference between the microleakage of all materials (3 experimental formulas and a commercial material) together at the occlusal site versus the gingival site (P=.041). CONCLUSION. A formula with 62% bisphenol A-glycidyl methacrylate (Bis-GMA), 37% hydroxy ethyl methacrylate (HEMA), 0.3% camphorquinone (CQ), and 0.7% dimethyl-para-toluidine (DMPT) seems a proper formula for mass production. The microleakage and SBS might be respectively higher and lower on dentin compared to enamel.
Abstract
PURPOSE. Bonding agents (BA) are the crucial weak link of composite restorations. Since the commercial materials’ compositions are not disclosed, studies to formulize the optimum ratios of different components are of value. The aim of this study was to find a proper formula of BAs. MATERIALS AND METHODS. This explorative experimental in vitro study was composed of 4 different sets of extensive experiments. A commercial BA and 7 experimental formulas were compared in terms of degree of conversion (5 experimental formulas), shear bond strength, mode of failure, and microleakage (3 experimental formulas). Statistical analyses were performed (α=.05). The DC of selected formula was tested one year later. RESULTS. The two-way ANOVA indicated a significant difference between the shear bond strength (SBS) of two tissues (dentin vs. enamel, P=.0001) in a way that dentinal bonds were weaker. However, there was no difference between the four materials (P=.283). The adhesive mode of failure was predominant in all groups. No differences between the microleakage of the four materials at occlusal (P=.788) or gingival (P=.508) sites were detected (Kruskal-Wallis). The Mann-Whitney U test showed a significant difference between the microleakage of all materials (3 experimental formulas and a commercial material) together at the occlusal site versus the gingival site (P=.041). CONCLUSION. A formula with 62% bisphenol A-glycidyl methacrylate (Bis-GMA), 37% hydroxy ethyl methacrylate (HEMA), 0.3% camphorquinone (CQ), and 0.7% dimethyl-para-toluidine (DMPT) seems a proper formula for mass production. The microleakage and SBS might be respectively higher and lower on dentin compared to enamel.
참고문헌 (43)
- Peumans M., "Porcelain veneers : a review of the literature", J Dent, 28, pp.163~177 (2000)
- Magne P., "Cumulative effects of successive restorative procedures on anterior crown flexure : intact versus veneered incisors", Quintessence Int, 31, pp.5~18 (2000)
- Shafiei L., "Microleakage of a self-adhesive class v composite on primary and permanent dentitions", J Contemp Dent Pract, 14, pp.461~467 (2013)
- Khosravanifard B., "Efficacy of 4 surface treatments in increasing the shear bond strength of orthodontic brackets bonded to saliva-contaminated direct composites", Orthod Wave, 70, pp.65~70 (2011)
- Khosravanifard B., "Effects of blood and saliva contamination on shear bond strength of metal orthodontic brackets and evaluating certain methods for reversing the effect of contamination", Orthod Wave, 69, pp.156~163 (2010)
- Jafarzadeh Kashi TS., "An in vitro assessment of the effects of three surface treatments on repair bond strength of aged composites", Oper Dent, 36, pp.608~617 (2011)
- Prasanna N., "Degree of conversion and residual stress of preheated and room-temperature composites", Indian J Dent Res, 18, pp.173~176 (2007)
- Tahereh Sadat Jafarzadeh-Kashi, "Polymerization behavior and thermal characteristics of two new composites at five temperatures: refrigeration to preheating", The Journal of Advanced of Prosthodontics, 3(4), pp.216~220 (2011), 대한치과보철학회
- Cotti E., "Comparison of the Degree of Conversion of Resin Based Endodontic Sealers Using the DSC Technique", Eur J Dent, 5, pp.131~138 (2011)
- Antonucci JM., "Extent of polymerization of dental resins by differential scanning calorimetry", J Dent Res, 62, pp.121~125 (1983)
- Braem M., "The relationship between test methodology and elastic behavior of composites", J Dent Res, 66, pp.1036~1039 (1987)
- Daronch M., "Monomer conversion of pre-heated composite", J Dent Res, 84, pp.663~667 (2005)
- Craig RG., "Craig’s restorative dental materials" (2006), Mosby Elsevier
- Anusavice KJ, "Phillips’ science of dental materials" (2003), Saunders
- O’Brien WJ., "Dental materials and their selection" (2008), Quintessence Publishing Co
- van Noort R., "Introduction to dental materials. 3rd ed" (2007), Elsevier
- Roberson TM, "Sturdevant’s art and science of operative dentistry" (2006), Mosby
- Cadenaro M., "Degree of conversion and permeability of dental adhesives", Eur J Oral Sci, 113, pp.525~530 (2005)
- Tay FR., "Single-step adhesives are permeable membranes", J Dent, 30, pp.371~382 (2002)
- De Munck J., "Four-year water degradation of total-etch adhesives bonded to dentin", J Dent Res, 82, pp.136~140 (2003)
- Hashimoto M., "Micromorphological changes in resin-dentin bonds after 1 year of water storage", J Biomed Mater Res, 63, pp.306~311 (2002)
- De Munck J., "A critical review of the durability of adhesion to tooth tissue : methods and results", J Dent Res, 84, pp.118~132 (2005)
- Breschi L., "Polymerization kinetics of dental adhesives cured with LED : correlation between extent of conversion and permeability", Dent Mater, 23, pp.1066~1072 (2007)
- Usümez S., "Degree of conversion of two lingual retainer adhesives cured with different light sources", Eur J Orthod, 27, pp.173~179 (2005)
- McDonald RE, "McDonald and Avery’s dentistry for the child and adolescent. Maryland Heights", pp.297~299 (2011), Elsevier
- Yoshida K., "Effect of photoinitiator on degree of conversion of unfilled light-cured resin", J Dent, 22, pp.296~299 (1994)
- Kashi TJ., "Comparison of shear bond strength and microleakage of Scotchbond multi-purpose(MP)adhesive system and an experimental Dentin Bonding agent based on standard of ISO TR 11405", J Dent Med, 22, pp.69~77 (2009)
- Taira M., "Analysis of photo-initiators in visible-light-cured dental composite resins", J Dent Res, 67, pp.24~28 (1988)
- Barkmeier WW., "Shear bond strength, microleakage and SEM study of the XR Bond adhesive system", Am J Dent, 2, pp.111~115 (1989)
- Fujisawa S., "Effects of photoinitiators for the visible-light resin system on hemolysis of dog erythrocytes and lipid peroxidation of their components", J Dent Res, 65, pp.1186~1190 (1986)
- Turner CW., "Repair of an aged, contaminated indirect composite resin with a direct, visible-light-cured composite resin", Oper Dent, 18, pp.187~194 (1993)
- Gilpatrick RO., "Resin-to-enamel bond strengths with various etching times", Quintessence Int, 22, pp.47~49 (1991)
- Cenci MS., "Influence of thermal stress on marginal integrity of restorative materials", J Appl Oral Sci, 16, pp.106~110 (2008)
- Silveira de Araújo C., "Microleakage of seven adhesive systems in enamel and dentin", J Contemp Dent Pract, 7, pp.26~33 (2006)
- Roberson TM, "Sturdevant’s art and science of operative dentistry", pp.381~395 (2006), Mosby
- Burrow MF., "Analysis of tensile bond strengths using Weibull statistics", Biomaterials, 25, pp.5031~5035 (2004)
- Diaz-Arnold AM., "An evaluation of the bond strengths of four organosilane materials in response to thermal stress", J Prosthet Dent, 62, pp.257~260 (1989)
- Keçik D., "Effect of acidulated phosphate fluoride and casein phosphopeptide-amorphous calcium phosphate application on shear bond strength of orthodontic brackets", Angle Orthod, 78, pp.129~133 (2008)
- Bouschlicher MR., "Surface treatment techniques for resin composite repair", Am J Dent, 10, pp.279~283 (1997)
- Pilo R., "Comparison of microleakage for three one-bottle and three multiple-step dentin bonding agents", J Prosthet Dent, 82, pp.209~213 (1999)
- Kim MJ., "Phosphoric acid incorporated with acidulated phosphate fluoride gel etchant effects on bracket bonding", Angle Orthod, 75, pp.678~684 (2005)
- Fracasso MDLC., "Evaluation of marginal microleakage and depth of penetration of glass ionomer cements used as occlusal sealants", J Appl Oral Sci, 13, pp.269~274 (2005)
- Ateyah NZ., "Shear bond strengths and microleakage of four types of dentin adhesive materials", J Contemp Dent Pract, 5, pp.63~73 (2004)