The influence of thread geometry on implant osseointegration under immediate loading: a literature review

키워드

참고문헌 (50)

1. Haas R., "Brånemark single tooth implants : a preliminary report of 76 implants", J Prosthet Dent, 73, pp.274~279 (1995)
2. Goodacre CJ., "Clinical complications with implants and implant prostheses", J Prosthet Dent, 90, pp.121~132 (2003)
3. Fugazzotto PA., "Success and failure rates of osseointegrated implants in function in regenerated bone for 72 to 133 months", Int J Oral Maxillofac Implants, 20, pp.77~83 (2005)
4. Atieh MA., "Immediate loading with single implant crowns : a systematic review and meta-analysis", Int J Prosthodont, 22, pp.378~387 (2009)
5. Cochran DL., "Consensus statements and recommended clinical procedures regarding loading protocols for endosseous dental implants", Int J Oral Maxillofac Implants, 19, pp.109~113 (2004)
6. Glauser R., "A systematic review of marginal soft tissue at implants subjected to immediate loading or immediate restoration", Clin Oral Implants Res, 17, pp.82~92 (2006)
7. Romanos GE., "Histologic and histomorphometric evaluation of peri-implant bone subjected to immediate loading : an experimental study with Macaca fascicularis", Int J Oral Maxillofac Implants, 17, pp.44~51 (2002)
8. Ibañez JC., "Immediate loading of osseotite implants : two-year results", Implant Dent, 11, pp.128~136 (2002)
9. Rocci A., "Immediate loading of Brånemark system TiUnite and machined-surface implants in the posterior mandible, part II : a randomized open-ended 9-year follow-up clinical trial", Int J Oral Maxillofac Implants, 28, pp.891~895 (2013)
10. Ostman PO., "Direct implant loading in the edentulous maxilla using a bone density-adapted surgical protocol and primary implant stability criteria for inclusion", Clin Implant Dent Relat Res, 7, pp.S60~S69 (2005)
11. Sennerby L., "Implant stability measurements using resonance frequency analysis : biological and biomechanical aspects and clinical implications", Periodontol 2000, 47, pp.51~66 (2008)
12. Abuhussein H., "The effect of thread pattern upon implant osseointegration", Clin Oral Implants Res, 21, pp.129~136 (2010)
13. Boggan RS., "Influence of hex geometry and prosthetic table width on static and fatigue strength of dental implants", J Prosthet Dent, 82, pp.436~440 (1999)
14. Hansson S., "The implant thread as a retention element in cortical bone : the effect of thread size and thread profile : a finite element study", J Biomech, 36, pp.1247~1258 (2003)
15. Prendergast PJ., "Microdamage and osteocyte-lacuna strain in bone : a microstructural finite element analysis", J Biomech Eng, 118, pp.240~246 (1996)
16. Brunski JB., "In vivo bone response to biomechanical loading at the bone", dental-implant interface, 1999, pp.13, 99~119
17. Frost HM., "Skeletal structural adaptations to mechanical usage(SATMU) : 1. Redefining Wolff›s law : the bone modeling problem", Anat Rec, 226, pp.403~413 (1990)
18. Chang PK., "Distribution of micromotion in implants and alveolar bone with different thread profiles in immediate loading: a finite element study", Int J Oral Maxillofac Implants, 27, pp.e96~e101 (2012)
19. Eraslan O., "The effect of thread design on stress distribution in a solid screw implant : a 3D finite element analysis", Clin Oral Investig, 14, pp.411~416 (2010)
20. Steigenga J., "Effects of implant thread geometry on percentage of osseointegration and resistance to reverse torque in the tibia of rabbits", J Periodontol, 75, pp.1233~1241 (2004)
21. Geng JP., "Finite element analysis of four thread-form configurations in a stepped screw implant", J Oral Rehabil, 31, pp.233~239 (2004)
22. Chun HJ., "Evaluation of design parameters of osseointegrated dental implants using finite element analysis", J Oral Rehabil, 29, pp.565~574 (2002)
23. McAllister BS., "Two-year evaluation of a variable-thread tapered implant in extraction sites with immediate temporization : a multicenter clinical trial", Int J Oral Maxillofac Implants, 27, pp.611~618 (2012)
24. Arnhart C., "Comparison of variable-thread tapered implant designs to a standard tapered implant design after immediate loading. A 3-year multicentre randomised controlled trial", Eur J Oral Implantol, 5, pp.123~136 (2012)
25. Ivanoff CJ., "Influence of variations in implant diameters : a 3-to 5-year retrospective clinical report", Int J Oral Maxillofac Implants, 14, pp.173~180 (1999)
26. Misch CE., "Short dental implants in posterior partial edentulism : a multicenter retrospective 6-year case series study", J Periodontol, 77, pp.1340~1347 (2006)
27. Steigenga JT., "Dental implant design and its relationship to long-term implant success", Implant Dent, 12, pp.306~317 (2003)
28. Orsini E., "Dental implant thread pitch and its influence on the osseointegration process : an in vivo comparison study", Int J Oral Maxillofac Implants, 27, pp.383~392 (2012)
29. Chung SH., "Effects of implant geometry and sur face treatment on osseointegration after functional loading : a dog study", J Oral Rehabil, 35, pp.229~236 (2008)
30. Ma P., "Influence of helix angle and density on primary stability of immediately loaded dental implants : three-dimensional finite element analysis", Zhonghua Kou Qiang Yi Xue Za Zhi, 42, pp.618~621 (2007)
31. Motoyoshi M., "Biomechanical effect of abutment on stability of orthodontic mini-implant. A finite element analysis", Clin Oral Implants Res, 16, pp.480~485 (2005)
32. Lan TH., "Biomechanical analysis of alveolar bone stress around implants with different thread designs and pitches in the mandibular molar area", Clin Oral Investig, 16, pp.363~369 (2012)
33. Kong L., "Optimized thread pitch design and stress analysis of the cylinder screwed dental implant", Hua Xi Kou Qiang Yi Xue Za Zhi, 24, pp.509~515 (2006)
34. Misch CE., "Contemporary Implant Dentistry", pp.200~229 (2008), Mosby
35. Ao J., "Optimal design of thread height and width on an immediately loaded cylinder implant : a finite element analysis", Comput Biol Med, 40, pp.681~686 (2010)
36. Kong L., "Evaluation of the cylinder implant thread height and width : a 3-dimensional finite element analysis", Int J Oral Maxillofac Implants, 23, pp.65~74 (2008)
37. Quirynen M., "Fixture design and overload influence marginal bone loss and fixture success in the Brånemark system", Clin Oral Implants Res, 3, pp.104~111 (1992)
38. Shimada E., "A pilot study to assess the performance of a partially threaded sintered porous-surfaced dental implant in the dog mandible", Int J Oral Maxillofac Implants, 22, pp.948~954 (2007)
39. Hermann JS., "Crestal bone changes around titanium implants : a methodologic study comparing linear radiographic with histometric measurements", Int J Oral Maxillofac Implants, 16, pp.475~485 (2001)
40. Hänggi MP., "Crestal bone changes around titanium implants. Part I : A retrospective radiographic evaluation in humans comparing two non-submerged implant designs with different machined collar lengths", J Periodontol, 76, pp.791~802 (2005)
41. Vaillancourt H., "Finite element analysis of crestal bone loss around porous-coated dental implants", J Appl Biomater, 6, pp.267~282 (1995)
42. Hansson S., "The implant neck : smooth or provided with retention elements. A biomechanical approach", Clin Oral Implants Res, 10, pp.394~405 (1999)
43. Chowdhary R, "Influence of micro threads alteration on osseointegration and primary stability of implants: an FEA and in vivo analysis in rabbits", Clin Implant Dent Relat Res (2013)
44. Negri B., "Peri-implant tissue reactions to immediate nonocclusal loaded implants with different collar design: an experimental study in dogs", Clin Oral Implants Res, 25, pp.e54~e63 (2014)
45. 윤희정, "A short-term clinical study of marginal bone level change around microthreaded and platformswitched implants", Journal of Periodontal & Implant Science, 41(5), pp.211~217 (2011), 대한치주과학회
46. Song DW., "Comparative analysis of peri-implant marginal bone loss based on microthread location : a 1-year prospective study after loading", J Periodontol, 80, pp.1937~1944 (2009)
47. Lee DW., "Effect of microthread on the maintenance of marginal bone level : a 3-year prospective study", Clin Oral Implants Res, 18, pp.465~470 (2007)
48. Calvo-Guirado JL, "Marginal bone loss evaluation around immediate non-occlusal microthreaded implants placed in fresh extraction sockets in the maxilla: a 3-year study", Clin Oral Implants Res (2014)
49. Amid R., "Effect of microthread design of dental implants on stress and strain patterns : a three-dimensional finite element analysis", Biomed Tech(Berl), 58, pp.457~467 (2013)
50. Schrotenboer J., "Effect of microthreads and platform switching on crestal bone stress levels : a finite element analysis", J Periodontol, 79, pp.2166~2172 (2008)

관련 논문AI추천