Investigation of flexural strength and cytotoxicity of acrylic resin copolymers by using different polymerization methods

키워드

참고문헌 (50)

1. Jagger DC, "The reinforcement of dentures", J Oral Rehabil, 26, pp.185~194 (1999)
2. Tamareselvy K, "Dynamic mechanical analysis of two crosslinked copolymer systems", Dent Mater, 10, pp.290~297 (1994)
3. Rached RN, "Heat-cured acrylic resin repaired with microwave-cured one: bond strength and surface texture", J Oral Rehabil, 28, pp.370~375 (2001)
4. Cunha TR, "Influence of incorporation of fluoroalkyl methacrylates on roughness and flexural strength of a denture base acrylic resin", J Appl Oral Sci, 17, pp.103~107 (2009)
5. Arlen MJ, "The reinforcement of polystyrene and poly(methyl methacrylate) interfaces using alternating copolymers", Polymer, 44, pp.6883~6889 (2003)
6. Sperling LH, "Polymeric multicomponent materials: an introduction" (1997), Wiley
7. Moszner N, "Bis-(acrylamide)s as new cross-linkers for resin-based composite restoratives", Dent Mater, 22, pp.1157~1162 (2006)
8. Ko MJ, "The effects of copolymer architecture on phase separation dynamics of immiscible homopolymer blends in the presence of copolymer: a Monte Carlo simulation. A Monte Carlo simulation", Polymer, 4, pp.6387~6394 (2000)
9. Doğan OM, "Effects of some methacrylate monomers used as liquid component on tensile and flexural strengths of poly (methylmethacrylate)denture base resin", Mater Res Innov, 10, pp.424~427 (2006)
10. Umemoto K, "Basic study of a new soft resin applied with bisfunctional siloxane oligomer", Dent Mater J, 26, pp.656~658 (2007)
11. Keyf F, "The effects of HEMA-monomer and air atmosphere treatment of glass fibre on the transverse strength of a provisional fixed partial denture resin", J Oral Rehabil, 30, pp.1142~1148 (2003)
12. Rodford RA, "Further development and evaluation of high impact strength denture base materials", J Dent, 18, pp.151~157 (1990)
13. Brar AS, "Microstructure determination of 2-hydroxy ethyl methacrylate and methyl acrylate copolymers by NMR spectroscopy", J Mol Struc, 828, pp.25~37 (2006)
14. Isaksson M, "The development and course of patch-test reactions to 2-hydroxyethyl methacrylate and ethyleneglycol dimethacrylate", Contact Dermatitis, 53, pp.292~297 (2005)
15. Yoshii E, "Cytotoxic effects of acrylates and methacrylates: relationships of monomer structures and cytotoxicity", J Biomed Mater Res, 37, pp.517~524 (1997)
16. Park JB, "Biomedical Engineering Handbook", pp.530~610 (1995), CRC Press and IEEE Press
17. Kedjarune U, "Release of methyl methacrylate from heat-cured and autopolymerized resins: cytotoxicity testing related to residual monomer", Aust Dent J, 44, pp.25~30 (1999)
18. Lefebvre CA, "Cytotoxicity of eluates from light-polymerized denture base resins", J Prosthet Dent, 72, pp.644~650 (1994)
19. Harrison A, "Effect of the curing cycle on residual monomer levels of acrylic resin denture base polymers", J Dent, 20, pp.370~374 (1992)
20. Yunus N, "Effect of microwave irradiation on the flexural strength and residual monomer levels of an acrylic resin repair material", J Oral Rehabil, 21, pp.641~648 (1994)
21. American dental Association, "Specifications for denture base polymer number 12", American dental Association, ~ (1999)
22. "ISO 1567:1999. Dentistry - Denture base polymers. International Standard Organization", ISO, ~ (1999)
23. Schmalz G, "Agar overlay method", Int Endod J, 21, pp.59~66 (1988)
24. Jagger D, "The effect of the addition of poly(methyl methacrylate) fibres on some properties of high strength heat-cured acrylic resin denture base material", J Oral Rehabil, 30, pp.231~235 (2003)
25. Rodford RA, "Further observations on high impact strength denture-base materials", Biomaterials, 13, pp.726~728 (1992)
26. Cho K, "Mechanical effects according to the type of poly(styrene-co-methyl methacrylate)copolymers at polystyrene", poly(methyl methacrylate) interfaces, 1996, pp.37, 4849~4852
27. Hayden WJ, "Flexural strength of microwave-cured denture baseplates", Gen Dent, 34, pp.367~371 (1986)
28. Craig RG, "Restorative dental materials" (1989), Mosby
29. Cho K, "The effect of interfacial adhesion on toughening behaviour of rubber modified poly(methyl methacrylate)", Polymer, 38, pp.5161~5167 (1997)
30. Johnson JA, "The mechanical properties of PMMA and its copolymers with ethyl methacrylate and butyl methacrylate", J Mater Sci, 29, pp.870~876 (1994)
31. Clarke RL, "Dynamic mechanical thermal analysis of dental polymers. III. Heterocyclic methacrylates", Biomaterials, 10, pp.630~633 (1989)
32. Doğan OM, "The effects of maleic anhydride terpolymer and its ester derivatives on tensile bond strength between the acrylic resin and resilient lining material", J App Polym Sci, 104, pp.1338~1341 (2007)
33. Cerveny S, "Dynamic properties in aluminum filled PMMA", Polymer, 40, pp.1495~1500 (1999)
34. Jorge JH, "Cytotoxicity of denture base acrylic resins: a literature review", J Prosthet Dent, 90, pp.190~193 (2003)
35. Kalipçilar B, "Evaluation of the level of residual monomer in acrylic denture base materials having different polymerization properties", J Oral Rehabil, 18, pp.399~401 (1991)
36. Schmalz G, "Use of cell cultures for toxicity testing of dental materials-advantages and limitations", J Dent, 22, pp.S6~S11 (1994)
37. Sheridan PJ, "Cytotoxicity of denture base resins", Int J Prosthodont, 10, pp.73~77 (1997)
38. Cimpan MR, "Patterns of cell death induced by eluates from denture base acrylic resins in U-937 human monoblastoid cells", Eur J Oral Sci, 108, pp.59~69 (2000)
39. Polat TN, "Water sorption, solubility and dimensional changes of denture base polymers reinforced with short glass fibers", J Biomater Appl, 17, pp.321~335 (2003)
40. Phoenix RD, "Evaluation of mechanical and thermal properties of commonly used denture base resins", J Prosthodont, 13, pp.17~27 (2004)
41. Sipahi C, "Effects of five different acrylic resin denture base materials on gingival fibroblasts", Gulhane Med J, 47, pp.275~278 (2005)
42. Ergun G, "Examination of cytotoxicity of denture base resins by agar diffusion and fitler diffusion test methods", Acta Odontol Turc, 23, pp.31~37 (2006)
43. Urban VM, "Development and application of methods for determination of residual monomer in dental acrylic resins using high performance liquid chromatography", Biomed Chromatogr, 20, pp.369~376 (2006)
44. Taira M, "Cytotoxic effect of methyl methacrylate on 4 cultured fibroblasts", Int J Prosthodont, 13, pp.311~315 (2000)
45. Doğan A, "The effect of preparation conditions of acrylic denture base materials on the level of residual monomer, mechanical properties and water absorption", J Dent, 23, pp.313~318 (1995)
46. Jorge JH, "Cytotoxicity of denture base acrylic resins: a literature review", J Prosthet Dent, 90, pp.190~193 (2003)
47. Phillips RW, "Skinner’s science of dental materials" (1982), Saunders Co
48. Bartoloni JA, "Degree of conversion in denture base materials for varied polymerization techniques", J Oral Rehabil, 27, pp.488~493 (2000)
49. Bayraktar G, "Influence of polymerization method, curing process, and length of time of storage in water on the residual methyl methacrylate content in dental acrylic resins", J Biomed Mater Res B Appl Biomater, 76, pp.340~345 (2006)
50. Truong VT, "Comparison of denture acrylic resins cured by boiling water and microwave energy", Aust Dent J, 33, pp.201~204 (1988)

관련 논문AI추천