Influence of various metal oxides on mechanical and physical properties of heat-cured polymethyl methacrylate denture base resins
3
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
PURPOSE. To evaluate the effect of various metal oxides on impact strength (IS), fracture toughness (FT), water sorption (WSP) and solubility (WSL) of heat-cured acrylic resin. MATERIALS AND METHODS. Fifty acrylic resin specimens were fabricated for each test and divided into five groups. Group 1 was the control group and Group 2, 3, 4 and 5 (test groups) included a mixture of 1% TiO2 and 1% ZrO2, 2% Al2O3, 2% TiO2, and 2% ZrO2 by volume, respectively. Rectangular unnotched specimens (50 mm × 6.0 mm × 4.0 mm) were fabricated and drop tower impact testing machine was used to determine IS. For FT, compact test specimens were fabricated and tests were done with a universal testing machine with a cross-head speed of 5 mm/min. For WSP and WSL, discshaped specimens were fabricated and tests were performed in accordance to ISO 1567. ANOVA and Kruskal-Wallis tests were used for statistical analyses. RESULTS. IS and FT values were significantly higher and WSP and WSL values were significantly lower in test groups than in control group (P<.05). Group 5 had significantly higher IS and FT values and significantly lower WSP values than other groups (P<.05) and provided 40% and 30% increase in IS and FT, respectively, compared to control group. Significantly lower WSL values were detected for Group 2 and 5 (P<.05). CONCLUSION. Modification of heat-cured acrylic resin with metal oxides, especially with ZrO2, may be useful in preventing denture fractures and undesirable physical changes resulting from oral fluids clinically.
Abstract
PURPOSE. To evaluate the effect of various metal oxides on impact strength (IS), fracture toughness (FT), water sorption (WSP) and solubility (WSL) of heat-cured acrylic resin. MATERIALS AND METHODS. Fifty acrylic resin specimens were fabricated for each test and divided into five groups. Group 1 was the control group and Group 2, 3, 4 and 5 (test groups) included a mixture of 1% TiO2 and 1% ZrO2, 2% Al2O3, 2% TiO2, and 2% ZrO2 by volume, respectively. Rectangular unnotched specimens (50 mm × 6.0 mm × 4.0 mm) were fabricated and drop tower impact testing machine was used to determine IS. For FT, compact test specimens were fabricated and tests were done with a universal testing machine with a cross-head speed of 5 mm/min. For WSP and WSL, discshaped specimens were fabricated and tests were performed in accordance to ISO 1567. ANOVA and Kruskal-Wallis tests were used for statistical analyses. RESULTS. IS and FT values were significantly higher and WSP and WSL values were significantly lower in test groups than in control group (P<.05). Group 5 had significantly higher IS and FT values and significantly lower WSP values than other groups (P<.05) and provided 40% and 30% increase in IS and FT, respectively, compared to control group. Significantly lower WSL values were detected for Group 2 and 5 (P<.05). CONCLUSION. Modification of heat-cured acrylic resin with metal oxides, especially with ZrO2, may be useful in preventing denture fractures and undesirable physical changes resulting from oral fluids clinically.
참고문헌 (38)
- Darbar UR, "Denture fracture-a survey", Br Dent J, 176, pp.342~345 (1994)
- Jagger DC, "The reinforcement of dentures", J Oral Rehabil, 26, pp.185~194 (1999)
- Meng TR Jr, "Physical properties of four acrylic denture base resins", J Contemp Dent Pract, 6, pp.93~100 (2005)
- Kanie T, "Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers", Dent Mater, 16, pp.150~158 (2000)
- Knott NJ, "The durability of acrylic complete denture bases in practice", Quintessence Int, 20, pp.341~343 (1989)
- Ruffino AR, "Effect of steel strengtheners on fracture resistance of the acrylic resin complete denture base", J Prosthet Dent, 54, pp.75~78 (1985)
- Teraoka F, "Adaptation of acrylic dentures reinforced with metal wire", J Oral Rehabil, 28, pp.937~942 (2001)
- Goldberg AJ, "The use of continuous fiber reinforcement in dentistry", Dent Mater, 8, pp.197~202 (1992)
- Sehajpal SB, "Effect of metal fillers on some physical properties of acrylic resin", J Prosthet Dent, 61, pp.746~751 (1989)
- Zuccari AG, "Reinforcement of acrylic resins for provisional fixed restorations. Part I: Mechanical properties", Biomed Mater Eng, 7, pp.327~343 (1997)
- Miettinen VM, "Water sorption and solubility of glass fiber-reinforced denture polymethyl methacrylate resin", J Prosthet Dent, 77, pp.531~534 (1997)
- Phoenix RD, "Denture base resins: technical considerations and processing techniques. In: Anusavice KJ, editor. Phillip’'s Science of Dental Materials", pp.721~756 (2003), Saunders WB Company
- Fujii K, "Fatigue properties of acrylic denture base resins", Dent Mater J, 8, pp.243~259 (1989)
- O’'Brien WJ, "Dental materials and their selection", pp.1~11 (2002), Quinttessence Pub Co
- "ISO 1567:1999. Dentistry-Denture base polymers", ISO, ~ (1999)
- Cucci AL, "Water sorption, solubility, and bond strength of two autopolymerizing acrylic resins and one heat-polymerizing acrylic resin", J Prosthet Dent, 80, pp.434~438 (1998)
- Vallittu PK, "Reinforcement of acrylic resin denture base material with metal or fibre strengtheners", J Oral Rehabil, 19, pp.225~230 (1992)
- Caycik S, "The effect of cross-linking chain length on mechanical properties of a dough-molded poly (methylmethacrylate)resin", Dent Mater, 8, pp.153~157 (1992)
- Yilmaz C, "The reinforcement effect of nano and microfillers on fracture toughness of two provisional resin materials", Mater Des, 28, pp.2063~2070 (2007)
- Manley TR, "Denture bases reinforced with carbon fibers", Br Dent J, 146, pp.25~28 (1979)
- DeBoer J, "The effect of carbon fiber orientation on the fatigue resistance and bending properties of two denture resins", J Prosthet Dent, 51, pp.119~121 (1984)
- Mullarky RH, "Aramid fiber reinforcement of acrylic appliances", J Clin Orthod, 19, pp.655~658 (1985)
- Braden M, "Denture base poly(methyl methacrylate) reinforced with ultra-thin modulus polyethylene fibers", Br Dent J, 164, pp.109~113 (1988)
- Solnit GS, "The effect of methyl methacrylate reinforcement with silane-treated and untreated glass fibers", J Prosthet Dent, 66, pp.310~314 (1991)
- Unal H, "Influence of filler addition on the mechanical properties of Nylon-6 Polymer", J Reinf Plast Compos, 23, pp.461~469 (2004)
- Korkmaz T, "Dynamic mechanical analysis of provisional resin materials reinforced by metal oxides", Biomed Mater Eng, 15, pp.179~188 (2005)
- Alhareb AO, "Effect of Al2O3", ZrO2 reinforcement on the mechanical properties of PMMA denture base, 2011, pp.30, 86~93
- Gupta N, "Effect of filler addition on the compressive and impact properties of glass fibre reinforced epoxy", Bull Mater Sci, 24, pp.219~223 (2001)
- Schricker SR, "Effect of metharcylated hyperbranched polymers on the fracture properties of denture base materials", J Macromol Sci Part A Pure Appl Chem, 43, pp.205~212 (2006)
- Elshereksi NW, "Mohd Isak ZA. Effect of filler incorporation on the fracture toughness properties of denture base poly(methyl methacrylate)", J Phys Sci, 20, pp.1~12 (2009)
- Schulze KA, "Effect of filler fraction on strength, viscosity and porosity of experimental compomer materials", J Dent, 31, pp.373~382 (2003)
- Cheng YY, "Denture base resin reinforced with high-performance polyethylene fiber: Water sorption and dimensional changes during immersion", J Macromol Sci Phys, 32, pp.433~481 (1993)
- Wong DM, "Effect of processing method on the dimensional accuracy and water sorption of acrylic resin dentures", J Prosthet Dent, 81, pp.300~304 (1999)
- Barsby MJ, "A denture base resin with low water absorption", J Dent, 20, pp.240~244 (1992)
- Arima T, "The effects of cross-linking agents on the water sorption and solubility characteristics of denture base resin", J Oral Rehabil, 23, pp.476~480 (1996)
- Ferracane JL, "Hygroscopic and hydrolytic effects in dental polymer networks", Dent Mater, 22, pp.211~222 (2006)
- Panyayong W, "Reinforcement of acrylic resins for provisional fixed restorations. Part III: effects of addition of titania and zirconia mixtures on some mechanical and physical properties", Biomed Mater Eng, 12, pp.353~366 (2002)
- Vallittu PK, "Comparison of two different silane compounds used for improving adhesion between fibres and acrylic denture base material", J Oral Rehabil, 20, pp.533~539 (1993)