Color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for non metal clasp denture
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
PURPOSE. The aim of this study was to compare the color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for the non-metal clasp dentures to those of thermoplastic polyamide and conventional heat-polymerized denture base resins. MATERIALS AND METHODS. Three types of denture base resin, which are conventional heat-polymerized acrylic resin (Paladent 20), thermoplastic polyamide resin (Bio Tone), thermoplastic acrylic resin (Acrytone) were used as materials for this study. One hundred five specimens were fabricated. For the color stability test, specimens were immersed in the coffee and green tee for 1 and 8 weeks. Color change was measured by spectrometer. Water sorption was tested after 1 and 8 weeks immersion in the water. For the test of cytotoxicity, cell viability assay was measured and cell attachment was analyzed by FE-SEM. RESULTS. All types of denture base resin showed color changes after 1 and 8 weeks immersion. However, there was no significant difference between denture base resins. All specimens showed significant color changes in the coffee than green tee. In water sorption test, thermoplastic acrylic resin showed lower values than conventional heat-polymerized acrylic resin and thermoplastic polyamide resin. Three types of denture base showed low cytotoxicity in cell viability assay. Thermoplastic acrylic resin showed the similar cell attachment but more stable attachment than conventional heat-polymerized acrylic resin. CONCLUSION. Thermoplastic acrylic resin for the non-metal clasp denture showed acceptable color stability, water sorption and cytotoxicity. To verify the long stability in the mouth, additional in vitro studies are needed.
Abstract
PURPOSE. The aim of this study was to compare the color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for the non-metal clasp dentures to those of thermoplastic polyamide and conventional heat-polymerized denture base resins. MATERIALS AND METHODS. Three types of denture base resin, which are conventional heat-polymerized acrylic resin (Paladent 20), thermoplastic polyamide resin (Bio Tone), thermoplastic acrylic resin (Acrytone) were used as materials for this study. One hundred five specimens were fabricated. For the color stability test, specimens were immersed in the coffee and green tee for 1 and 8 weeks. Color change was measured by spectrometer. Water sorption was tested after 1 and 8 weeks immersion in the water. For the test of cytotoxicity, cell viability assay was measured and cell attachment was analyzed by FE-SEM. RESULTS. All types of denture base resin showed color changes after 1 and 8 weeks immersion. However, there was no significant difference between denture base resins. All specimens showed significant color changes in the coffee than green tee. In water sorption test, thermoplastic acrylic resin showed lower values than conventional heat-polymerized acrylic resin and thermoplastic polyamide resin. Three types of denture base showed low cytotoxicity in cell viability assay. Thermoplastic acrylic resin showed the similar cell attachment but more stable attachment than conventional heat-polymerized acrylic resin. CONCLUSION. Thermoplastic acrylic resin for the non-metal clasp denture showed acceptable color stability, water sorption and cytotoxicity. To verify the long stability in the mouth, additional in vitro studies are needed.
참고문헌 (50)
- Takabayashi Y, "Characteristics of denture thermoplastic resins for non-metal clasp dentures", Dent Mater J, 29, pp.353~361 (2010)
- Truong VT, "Comparison of denture acrylic resins cured by boiling water and microwave energy", Aust Dent J, 33, pp.201~204 (1988)
- Yunus N, "Some flexural properties of a nylon denture base polymer", J Oral Rehabil, 32, pp.65~71 (2005)
- Matthews E., "Nylon as a denture base material", Br Dent J, 98, pp.231~237 (1955)
- Watt DM, "Clinical assessment of nylon as a partial denture base material", Br Dent J, 98, pp.238~244 (1955)
- Katsumata Y, "Bonding strength of autopolymerizing resin to nylon denture base polymer", Dent Mater J, 28, pp.409~418 (2009)
- Koray Soygun, "Mechanical and thermal properties of polyamide versus reinforced PMMA denture base materials", The Journal of Advanced of Prosthodontics, 5(2), pp.153~160 (2013), 대한치과보철학회[DOI]
- Kim JH, "Evaluation of adhesion of reline resins to the thermoplastic denture base resin for nonmetal clasp denture", Dent Mater J, 33, pp.32~38 (2014)
- Altug Cilingir, "In vitro comparison of two different materials for the repair of urethan dimethacrylate denture bases", The Journal of Advanced of Prosthodontics, 5(4), pp.396~401 (2013), 대한치과보철학회[DOI]
- 남기영, "Characterization and bacterial antiadherent effect on modified PMMA denture acrylic resin containing platinum nanoparticles", The Journal of Advanced of Prosthodontics, 6(3), pp.207~214 (2014), 대한치과보철학회[DOI]
- Hersek N, "Color stability of denture base acrylic resins in three food colorants", Color stability of denture base acrylic resins in three food colorants, 81, pp.375~379 (1999)
- Hiromori K, "Viscoelastic properties of denture base resins obtained by underwater test", J Oral Rehabil, 27, pp.522~531 (2000)
- Wong DM, "Effect of processing method on the dimensional accuracy and water sorption of acrylic resin dentures", J Prosthet Dent, 81, pp.300~304 (1999)
- Cucci AL, "Water sorption, solubility, and bond strength of two autopolymerizing acrylic resins and one heat-polymerizing acrylic resin", J Prosthet Dent, 80, pp.434~438 (1998)
- Lefebvre CA, "Cytotoxicity of eluates from light-polymerized denture base resins", J Prosthet Dent, 72, pp.644~650 (1994)
- Hunter RS, "The measurement of appearance" (1987), John Wiley
- Miettinen VM, "Water sorption and solubility of glass fiber-reinforced denture polymethyl methacrylate resin", J Prosthet Dent, 77, pp.531~534 (1997)
- Tuna SH, "The evaluation of water sorption", solubility on various acrylic resins, 2008, pp.2, 191~197
- Sepúlveda-Navarro WF, "Color stability of resins and nylon as denture base material in beverages", J Prosthodont, 20, pp.632~638 (2011)
- Paul S, "Visual and spectrophotometric shade analysis of human teeth", J Dent Res, 81, pp.578~582 (2002)
- Bagheri R, "Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials", J Dent, 33, pp.389~398 (2005)
- Hu X, "Measuring the color of maxillofacial prosthetic material", J Dent Res, 89, pp.1522~1527 (2010)
- Villalta P, "Effects of staining and bleaching on color change of dental composite resins", J Prosthet Dent, 95, pp.137~142 (2006)
- Goiato MC, "Effect of accelerated aging on the microhardness and color stability of flexible resins for dentures", Braz Oral Res, 24, pp.114~119 (2010)
- Wilson NH, "Reasons for placement and replacement of restorations of direct restorative materials by a selected group of practitioners in the United Kingdom", Quintessence Int, 28, pp.245~248 (1997)
- Abu-Bakr N, "Color stability of compomer after immersion in various media", J Esthet Dent, 12, pp.258~263 (2000)
- Asmussen E, "Factors affecting the color stability of restorative resins", Acta Odontol Scand, 41, pp.11~18 (1983)
- Polyzois GL, "Color stability of visible light-cured, hard direct denture reliners: an in vitro investigation", Int J Prosthodont, 12, pp.140~146 (1999)
- Buyukyilmaz S, "Color stability of denture base polymers", Int J Prosthodont, 7, pp.372~382 (1994)
- Chan KC, "The ability of foods to stain two composite resins", J Prosthet Dent, 43, pp.542~545 (1980)
- Lai YL, "In vitro color stability, stain resistance, and water sorption of four removable gingival flange materials", J Prosthet Dent, 90, pp.293~300 (2003)
- Guler AU, "Effects of different drinks on stainability of resin composite provisional restorative materials", J Prosthet Dent, 94, pp.118~124 (2005)
- Um CM, "Staining of resin-based veneering materials with coffee and tea", Quintessence Int, 22, pp.377~386 (1991)
- Ferracane JL, "Hygroscopic and hydrolytic effects in dental polymer networks", Dent Mater, 22, pp.211~222 (2006)
- de Freitas Fernandes FS, "Efficacy of denture cleansers on Candida spp. biofilm formed on polyamide and polymethyl methacrylate resins", J Prosthet Dent, 105, pp.51~58 (2011)
- Malacarne J, "Water sorption", solubility of dental adhesive resins, 2006, pp.22, 973~980
- Barsby MJ, "A denture base resin with low water absorption", J Dent, 20, pp.240~244 (1992)
- Ristic B, "Water sorption by denture acrylic resin and consequent changes in vertical dimension", J Prosthet Dent, 58, pp.689~693 (1987)
- Patel MP, "Heterocyclic methacrylates for clinical applications. III. Water absorption characteristics", Biomaterials, 12, pp.653~657 (1991)
- Woelfel JB, "Some physical properties of organic denture base materials", J Am Dent Assoc, 67, pp.499~504 (1963)
- "ISO 1567:1999. Dentistry - Denture base polymers", ~ (1999)
- Arima T, "The effects of cross-linking agents on the water sorption and solubility characteristics of denture base resin", J Oral Rehabil, 23, pp.476~480 (1996)
- Hargreaves AS, "Nylon as a denture-base material", Dent Pract Dent Rec, 22, pp.122~128 (1971)
- Kurtulmus H, "Effects of saliva and nasal secretion on some physical properties of four different resin materials", Med Oral Patol Oral Cir Bucal, 15, pp.e969~e975 (2010)
- Dixon DL, "Linear dimensional variability of three denture base resins after processing and in water storage", J Prosthet Dent, 68, pp.196~200 (1992)
- Lefebvre CA, "The effect of pH on the cytotoxicity of eluates from denture base resins", Int J Prosthodont, 8, pp.122~128 (1995)
- Koda T, "Leachability of denture-base acrylic resins in artificial saliva", Dent Mater, 6, pp.13~16 (1990)
- McCabe JF, "Tissue sensitivity to acrylic resin. A method of measuring the residual monomer content and its clinical application", Br Dent J, 140, pp.347~350 (1976)
- Vallittu PK, "In vitro cytotoxicity of fibre-polymethyl methacrylate composite used in dentures", J Oral Rehabil, 26, pp.666~671 (1999)
- Hensten-Pettersen A, "The cytotoxic effect of denture base polymers", Acta Odontol Scand, 39, pp.101~106 (1981)