Evaluation of polymethyl methacrylate resin mechanical properties with incorporated halloysite nanotubes

키워드

참고문헌 (34)

1. Jagger DC, "The reinforcement of dentures", J Oral Rehabil, 26, pp.185~194 (1999)
2. Kim SH, "The effect of reinforcement with woven E-glass fibers on the impact strength of complete dentures fabricated with high-impact acrylic resin.", J Prosthet Dent, 91, pp.274~280 (2004)
3. Vallittu PK, "Effect of metal strengthener’s surface roughness on fracture resistance of acrylic denture base material", J Oral Rehabil, 19, pp.385~391 (1992)
4. Vallittu PK, "Effect of some properties of metal strengtheners on the fracture resistance of acrylic denture base material construction", J Oral Rehabil, 20, pp.241~248 (1993)
5. John J, "Flexural strength of heat-polymerized polymethyl methacrylate denture resin reinforced with glass, aramid, or nylon fibers", J Prosthet Dent, 86, pp.424~427 (2001)
6. Chen SY, "Effects of fillers on fiber reinforced acrylic denture base resins", Mid Taiwan J Med, 9, pp.203~210 (2004)
7. Zarb GA, "Prosthodontic Treatment for Edentulous Patients", pp.195~ (2004), Elsevier
8. Ellakwa AE, "Effect of aluminum oxide addition on the flexural strength and thermal diffusivity of heat-polymerized acrylic resin", J Prosthodont, 17, pp.439~444 (2008)
9. Ayad NM, "Effect of Reinforcement of High impact acrylic resin with zirconia on some physical and mechanical properties", Rev Clin Pesq Odontol, 4, pp.145~151 (2008)
10. Panyayong W, "Reinforcement of acrylic resins for provisional fixed restorations. Part III: Effects of addition of titania and zirconia mixtures on some mechanical and physical properties", Biomed Mater eng, 12, pp.327~343 (2002)
11. Saad-Eldeen MA, "Effect of zirconium oxide reinforcement on epithelial oral mucosa, Immunoglobulin and surface roughness of complete acrylic heat-cured denture", Egypt Dent Associat, 53, pp.941~946 (2007)
12. Tinschert J, "Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study", Int J Prosthodont, 14, pp.231~238 (2001)
13. Abdel-Samad A, "Evaluation of the effect of zirconium oxide on wear resistance and hardness of acrylic teeth", Egypt Dent Associat, 55, pp.639~643 (2009)
14. Minamizato T, "Slip-cast zirconia dental roots with tunnels drilled by laser process", J Prosthet Dent, 63, pp.677~684 (1990)
15. William D, "Materials science and engineering: An introduction", pp.532~533 (1997), John Wiley & Sons Incorporation
16. Radford DR, "Adherence of Candida albicans to denture-base materials with different surface finishes", J Dent, 26, pp.577~583 (1998)
17. Verran J, "Retention of Candida albicans on acrylic resin and silicone of different surface topography", J Prosthet Dent, 77, pp.535~539 (1997)
18. Powers JM, "Craig’s Restorative Dental Materials", pp.79~ (2006), Elsevier
19. Joussein E, "Halloysite clay minerals - a review", Clay Minerals, 40, pp.383~426 (2005)
20. Hope E, "Surface tension and the morphology of halloysite", The American Mineralogist, 49, pp.859~863 (1964)
21. Vergaro V, "Cytocompatibility and uptake of halloysite clay nanotubes", Biomacromolecules, 11, pp.820~826 (2010)
22. Guimarães L, "Structural, electronic, and mechanical properties of singlewalled halloysite nanotube models", J Phys Chem C, 114, pp.11358~11363 (2010)
23. Guimarães L, "Imogolite nanotubes: stability, electronic, and mechanical properties", ACS Nano, 1, pp.362~368 (2007)
24. Ye YP, "Interlaminar properties of carbon fiber composites with halloysite nanotube-toughened epoxy matrix", Compos Sci Technol, 71, pp.717~723 (2011)
25. Sehajpal SB, "Effect of metal fillers on some physical properties of acrylic resin", J Prosthet Dent, 61, pp.746~751 (1989)
26. International Organization for Standardization, "Specification 1567: Denture Base Polymers", 1~9 (1988)
27. Takahashi Y, "Flexural strength at the proportional limit of a denture base material relined with four different denture reline materials", Int J Prosthodont, 10, pp.508~512 (1997)
28. Vallittu PK, "Effect of water storage on the flexural properties of E-glass and silica fiber acrylic resin composite", Int J Prosthodont, 11, pp.340~350 (1998)
29. Machado AL, "Hardness and surface roughness of reline and denture base acrylic resins after repeated disinfection procedures", J Prosthet Dent, 102, pp.115~122 (2009)
30. Chen Q, "Fabrication and evaluation of Bis-GMA", TEGDMA dental resins, Dent Mater, pp.2012, 28[DOI]
31. Leinfelder KF, "Five-year clinical evaluation of anterior and posterior restorations of composite resin", Oper Dent, 12, pp.52~78 (1980)
32. Xu HH, "Dental composite resins containing silica-fused ceramic single-crystalline whiskers with various filler levels", J Dent Res, 78, pp.1304~1311 (1999)
33. Xu HH, "Strengthening composite resin restorations with ceramic whisker reinforcement", Pract Periodontics Aesthet Dent, 12, pp.111~116 (2000)
34. Vojdani M, "Effects of aluminum oxide addition on the flexural strength, surface hardness, and roughness of heat-polymerized acrylic resin", J Dent Sci, 7, pp.238~244 (2012)

관련 논문AI추천