Effects of hydrogen peroxide pretreatment and heat activation of silane on the shear bond strength of fiber-reinforced composite posts to resin cement
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. To evaluate the effects of hydrogen peroxide pretreatment and heat activation of silane on the shear bond strength of fiber-reinforced composite posts to resin cement. MATERIALS AND METHODS. The specimens were prepared to evaluate the bond strength of epoxy resin-based fiber posts (D.T. Light-Post) to dual-curing resin cement (RelyX U200). The specimens were divided into four groups (n=18) according to different surface treatments: group 1, no treatment; group 2, silanization; group 3, silanization after hydrogen peroxide etching; group 4, silanization with warm drying at 80°C after hydrogen peroxide etching. After storage of the specimens in distilled water at 37°C for 24?hours, the shear bond strength (in MPa) between the fiber post and resin cement was measured using a universal testing machine. The fractured surface of the fiber post was examined using scanning electron microscopy. Data were analyzed using one-way ANOVA and post-hoc analysis with Tukey’s HSD test (α=0.05). RESULTS. Silanization of the fiber post (Group 2) significantly increased the bond strength in comparison with the non treated control (Group 1) (P<.05). Heat drying after silanization also significantly increased the bond strength (Group 3 and 4) (P<.05). However, no effect was determined for hydrogen peroxide etching before applying silane agent (Group 2 and 3) (P>.05). CONCLUSION. Fiber post silanization and subsequent heat treatment (80°C) with warm air blower can be beneficial in clinical post cementation. However, hydrogen peroxide etching prior to silanization was not effective in this study. [J Adv Prosthodont 2016;8:94-100]
Abstract
PURPOSE. To evaluate the effects of hydrogen peroxide pretreatment and heat activation of silane on the shear bond strength of fiber-reinforced composite posts to resin cement. MATERIALS AND METHODS. The specimens were prepared to evaluate the bond strength of epoxy resin-based fiber posts (D.T. Light-Post) to dual-curing resin cement (RelyX U200). The specimens were divided into four groups (n=18) according to different surface treatments: group 1, no treatment; group 2, silanization; group 3, silanization after hydrogen peroxide etching; group 4, silanization with warm drying at 80°C after hydrogen peroxide etching. After storage of the specimens in distilled water at 37°C for 24?hours, the shear bond strength (in MPa) between the fiber post and resin cement was measured using a universal testing machine. The fractured surface of the fiber post was examined using scanning electron microscopy. Data were analyzed using one-way ANOVA and post-hoc analysis with Tukey’s HSD test (α=0.05). RESULTS. Silanization of the fiber post (Group 2) significantly increased the bond strength in comparison with the non treated control (Group 1) (P<.05). Heat drying after silanization also significantly increased the bond strength (Group 3 and 4) (P<.05). However, no effect was determined for hydrogen peroxide etching before applying silane agent (Group 2 and 3) (P>.05). CONCLUSION. Fiber post silanization and subsequent heat treatment (80°C) with warm air blower can be beneficial in clinical post cementation. However, hydrogen peroxide etching prior to silanization was not effective in this study. [J Adv Prosthodont 2016;8:94-100]
참고문헌 (25)
- Morgano SM, "Restoration of pulpless teeth: application of traditional principles in present and future contexts", J Prosthet Dent, 75, pp.375~380 (1996)
- Ayad MF, "Influence of irrigant, dowel type, and root-reinforcing material on fracture resistance of thin-walled endodontically treated teeth", J Prosthodont, 20, pp.180~189 (2011)
- Choi Y, "The effect of surface treatment of fiber-reinforced posts on adhesion of a resinbased luting agent", J Prosthet Dent, 103, pp.362~368 (2010)
- Aksornmuang J, "Microtensile bond strength of a dual-cure resin core material to glass and quartz fibre posts", J Dent, 32, pp.443~450 (2004)
- Aksornmuang J, "Regional bond strengths and failure analysis of fiber posts bonded to root canal dentin", Oper Dent, 33, pp.636~643 (2008)
- Ferrari M, "Long-term retrospective study of the clinical performance of fiber posts", Am J Dent, 20, pp.287~291 (2007)
- Monticelli F, "Surface treatments for improving bond strength to prefabricated fiber posts: a literature review", Oper Dent, 33, pp.346~355 (2008)
- Machado AC, "Critical analysis of fiber post surface treatment: A review", Biosci J, 30, pp.914~924 (2014)
- Bitter K, "Effect of silanization on bond strengths of fiber posts to various resin cements", Quintessence Int, 38, pp.121~128 (2007)
- Mosharraf R, "Comparative evaluation of effects of different surface treatment methods on bond strength between fiber post and composite core", Adv Prosthodont, 4, pp.103~108 (2012)
- Perdigão J, "The effect of silane on the bond strengths of fiber posts", Dent Mater, 22, pp.752~758 (2006)
- Goracci C, "The adhesion between prefabricated FRC posts and composite resin cores: microtensile bond strength with and without post-silanization", Dent Mater, 21, pp.437~444 (2005)
- Goracci C, "Current perspectives on post systems:a literature review", Aust Dent J, 56, pp.77~83 (2011)
- Monticelli F, "A simple etching technique for improving the retention of fiber posts to resin composites", J Endod, 32, pp.44~47 (2006)
- Brorson SH, "A comparative study of the immunogold labeling on H2O2-treated and heated epoxy sections", Micron, 32, pp.147~151 (2001)
- Pfeiffer SW, "Use of hydrogen peroxide to accelerate staining of ultrathin Spurr sections", Stain Technol, 57, pp.137~142 (1982)
- de Sousa Menezes M, "Fiber post etching with hydrogen peroxide: effect of concentration and application time", J Endod, 37, pp.398~402 (2011)
- Yenisey M, "Effects of chemical surface treatments of quartz and glass fiber posts on the retention of a composite resin", J Prosthet Dent, 99, pp.38~45 (2008)
- 김현동, "Effect of silane activation on shear bond strength of fiber-reinforced composite post to resin cement", The Journal of Advanced of Prosthodontics, 5(2), pp.104~109 (2013), 대한치과보철학회[DOI]
- Novais VR, "Bond strength between fiber posts and composite resin core: influence of temperature on silane coupling agents", Braz Dent J, 23, pp.8~14 (2012)
- Monticelli F, "Effect of temperature on the silane coupling agents when bonding core resin to quartz fiber posts", Dent Mater, 22, pp.1024~1028 (2006)
- Papacchini F, "Effect of air-drying temperature on the effectiveness of silane primers and coupling blends in the repair of a microhybrid resin composite", J Adhes Dent, 9, pp.391~397 (2007)
- Barghi N, "Effects of timing and heat treatment of silanated porcelain on the bond strength", J Oral Rehabil, 27, pp.407~412 (2000)
- de la Fuente JL, "Solvent effects on the free-radical copolymerization of butyl acrylate with methyl methacrylate", Macromol Chem Phys, 200, pp.1639~1643 (1999)
- Maryam Khoroushi, "Effect of antioxidants on push-out bond strength of hydrogen peroxide treated glass fiber posts bonded with two types of resin cement", Restorative Dentistry and Endodontics, 39(4), pp.303~309 (2014), 대한치과보존학회