Effect of repair methods and materials on the flexural strength of 3D-printed denture base resin

키워드

참고문헌 (51)

1. Alghazzawi TF, "Advancements in CAD", CAM technology : Options for practical implementation, 2016, pp.60, 72~84
2. Tasaka A, "Accuracy and retention of denture base fabricated by heat curing and additive manufacturing", J Prosthodont Res, 63, pp.85~89 (2019)
3. Kalberer N, "CAD-CAM milled versus rapidly prototyped(3D-printed)complete dentures : An in vitro evaluation of trueness", J Prosthet Dent, 121, pp.637~643 (2019)
4. Prpić V, "Comparison of mechanical properties of 3D-Printed, CAD", CAM, and conventional denture base materials, 2020, pp.29, 524~528
5. da Veiga Pessoa DM, "Economic and sociodemographic inequalities in complete denture need among older Brazilian adults : a cross-sectional population-based study", BMC Oral Health, 17, pp.5~ (2016)
6. Bettencourt AF, "Biodegradation of acrylic based resins : a review", Dent Mater, 26, pp.e171~e180 (2010)
7. Rached RN, "Repair strength of autopolymerizing, microwave, and conventional heat-polymerized acrylic resins", J Prosthet Dent, 92, pp.79~82 (2004)
8. Minami H, "In vitro evaluation of the influence of repairing condition of denture base resin on the bonding of autopolymerizing resins", J Prosthet Dent, 91, pp.164~170 (2004)
9. Bural C, "Flexural properties of repaired heat-polymerising acrylic resin after wetting with monomer and acetone", Gerodontology, 27, pp.217~223 (2010)
10. Pereira Rde P, "Influence of surface treatments on the flexural strength of denture base repair", Gerodontology, 29, pp.e234~e238 (2012)
11. Arioli Filho JN, "Flexural strength of acrylic resin repairs processed by different methods: water bath, microwave energy and chemical polymerization", J Appl Oral Sci, 19, pp.249~253 (2011)
12. Altug Cilingir, "In vitro comparison of two different materials for the repair of urethan dimethacrylate denture bases", The Journal of Advanced of Prosthodontics, 5(4), pp.396~401 (2013), 대한치과보철학회[DOI]
13. Alkurt M, "Effect of repair resin type and surface treatment on the repair strength of heat-polymerized denture base resin", J Prosthet Dent, 111, pp.71~78 (2014)
14. Özdemir H, "Bond strength of resilient lining materials to denture base resin : a systematic review and meta-analysis", J Prosthodont, 27, pp.828~841 (2018)
15. Rached RN, "Heat-cured acrylic resin repaired with microwave-cured one : bond strength and surface texture", J Oral Rehabil, 28, pp.370~375 (2001)
16. Vallittu PK, "Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat-polymerized resin", J Prosthet Den, 72, pp.639~643 (1994)
17. Tamore SH, "Flexural strength of surface-treated heat-polymerized acrylic resin after repair with aluminum oxide-reinforced autopolymerizing acrylic resin", Contemp Clin Dent, 9, pp.S347~S353 (2018)
18. Qaw MS, "A novel approach to improve repair bond strength of repaired acrylic resin : an in vitro study on the shear bond strength", J Prosthodont, 29, pp.323~333 (2020)
19. Yadav NS, "In-vitro evaluation of transverse strength of repaired heat cured denture base resins without surface treatment and with chemical and mechanical surface treatment", J Int Oral Health, 7, pp.89~92 (2015)
20. Leles CR, "Bonding strength between a hard chairside reline resin and a denture base material as influenced by surface treatment", J Oral Rehabil, 28, pp.1153~1157 (2001)
21. Shimizu H, "Effect of surface preparation using ethyl acetate on the repair strength of denture base resin", Acta Odontol Scand, 64, pp.159~163 (2006)
22. Jacobsen NL, "Lased and sandblasted denture base surface preparations affecting resilient liner bonding", J Prosthet Dent, 78, pp.153~158 (1997)
23. Gundogdu M, "Effect of surface treatments on the bond strength of soft denture lining materials to an acrylic resin denture base", J Prosthet Dent, 112, pp.964~971 (2014)
24. Akin H, "Shear bond strength of denture teeth to two chemically different denture base resins after various surface treatments", J Prosthodont, 23, pp.152~156 (2014)
25. Kumar V, "A comparative evaluation of effect of reinforced autopolymerizing resin on the flexural strength of repaired heat-polymerized denture base resin before and after thermocycling", J Int Soc Prev Community Dent, 7, pp.S99~S106 (2017)
26. Yoshida K, "Reinforcing effect of glass fiber-reinforced composite reinforcement on flexural strength at proportional limit of a repaired denture base resin", Acta Biomater Odontol Scand, 1, pp.81~85 (2015)
27. Rahaman Ali AAA, "Effect of thermal cycling on flexural properties of microcrystalline cellulose-reinforced denture base acrylic resins", J Prosthodont, 29, pp.611~616 (2020)
28. Gad MM, "Influence of artificial aging and ZrO2 nanoparticle-reinforced repair resin on the denture repair strength", J Clin Exp Dent, 12, pp.e354~e362 (2020)
29. Gad MM, "Impact of different surface treatments and repair material reinforcement on the flexural strength of repaired PMMA denture base material", Dent Mater J, 39, pp.471~482 (2020)
30. Li P, "Repairability of a 3D printed denture base polymer : Effects of surface treatment and artificial aging on the shear bond strength", J Mech Behav Biomed Mater, 114, pp.104227~ (2021)
31. Neshandar Asli H, "Effect of different surface treatments on surface roughness and flexural strength of repaired 3D-printed denture base : An in vitro study", J Prosthet Dent, 126, pp.595~ (2021)
32. "ISO 1567. Dentistry-Denture base polymers", International Standard Organization (ISO), ~ (1999)
33. Kim JY, "Effect of laboratory procedures and thermocycling on the shear bond strength of resin-metal bonding systems", J Prosthet Dent, 90, pp.184~189 (2003)
34. Kulak-Ozkan Y, "Effect of thermocycling on tensile bond strength of six silicone-based, resilient denture liners", J Prosthet Dent, 89, pp.303~310 (2003)
35. Choi JE, "Adhesive evaluation of three types of resilient denture liners bonded to heat-polymerized, autopolymerized, or CAD-CAM acrylic resin denture bases", J Prosthet Dent, 120, pp.699~705 (2018)
36. Alp G, "Comparison of flexural strength of different CAD", CAM PMMA-based polymers, 2019, pp.28, e491~e495
37. Harrison WM, "The effect of joint surface contours on the transverse strength of repaired acrylic resin", J Prosthet Dent, 23, pp.464~472 (1970)
38. Chitchumnong P, "Comparison of three-and four-point flexural strength testing of denture-base polymers", Dent Mater, 5, pp.2~5 (1989)
39. Andreopoulos AG, "Repair of denture base resins using visible light-cured materials", J Prosthet Dent, 72, pp.462~468 (1994)
40. Barbosa DB, "Effect of monomer treatment and polymerisation methods on the bond strength of resin teeth to denture base material", Gerodontology, 26, pp.225~231 (2009)
41. AlQahtani M, "Influence of different repair acrylic resin and thermocycling on the flexural strength of denture base resin", Medicina(Kaunas), 56, pp.50~ (2020)
42. Paleari AG, "Effect of incorporation of 2-tert-butylaminoethyl methacrylate on flexural strength of a denture base acrylic resin", J Appl Oral Sci, 19, pp.195~199 (2011)
43. Sasaki H, "Effect of reinforcement on the flexural properties of injection-molded thermoplastic denture base resins", J Prosthodont, 26, pp.302~308 (2017)
44. Pinto JR, "Evaluation of varying amounts of thermal cycling on bond strength and permanent deformation of two resilient denture liners", J Prosthet Dent, 92, pp.288~293 (2004)
45. Gad MM, "Effect of repair gap width on the strength of denture repair : an in vitro comparative study", J Prosthodont, 28, pp.684~691 (2019)
46. Sari F, "Efficacy of various pretreatments on the bond strength of denture teeth to denture base resins", Photomed Laser Surg, 36, pp.214~220 (2018)
47. Marra J, "Evaluation of the bond strength of denture base resins to acrylic resin teeth : effect of thermocycling", J Prosthodont, 18, pp.438~443 (2009)
48. Choi JJE, "Bond strength of denture teeth to heatcured, cad", cam and 3d printed denture acrylics, 2020, pp.29, 415~421
49. Aati S, "Effect of post-curing light exposure time on the physico-mechanical properties and cytotoxicity of 3D-printed denture base material", Dent Mater, 38, pp.57~67 (2022)
50. Shim JS, "Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations", J Prosthet Dent, 124, pp.468~475 (2020)
51. Hada T, "Effect of printing direction on the accuracy of 3d-printed dentures using stereolithography technology", Materials(Basel), 13, pp.3405~ (2020)

관련 논문AI추천