본문 바로가기
KERD
논문KCI 등재

Effect of surface treatment on shear bond strength of relining material and 3D-printed denture base

이준석|박세직
대한치과보철학회 (The Korean Academy Of Prosthodontics)|2022.08|The Journal of Advanced of Prosthodontics|제14권 제4호|pp. 262-272|DOI https://doi.org/10.4047/jap.2022.14.4.262

2

조회

0

다운로드

2

인용

0

참고문헌

키워드

Surface treatment3D printingComputer-aided designDenture baseRocatec system

초록

PURPOSE. This study aimed to analyze the shear bond strength between the 3D-printed denture base and the chairside relining material, according to the surface treatment. MATERIALS AND METHODS. Cylindrical specimens were prepared using DENTCA Denture Base II. The experimental groups were divided into 6 (n = 10): no surface treatment (C), Tokuyama Rebase II Normal adhesive (A), sandblasting (P), sandblasting and adhesive (PA), sandblasting and silane (PS), and the Rocatec system (PPS). After bonding the chairside relining material to the center of the specimens in a cylindrical shape, they were stored in distilled water for 24 hours. Shear bond strength was measured using a universal testing machine, and failure mode was analyzed with a scanning electron microscope. Shear bond strength values were analyzed using one-way analysis of variance, and Tukey’s honest significant difference test was used for post-hoc analysis (P < .05). RESULTS. Group PPS exhibited significantly higher shear bond strength than all other groups. Groups P and PA displayed significantly higher bond strengths than the control group. There were no significant differences between groups PS and A compared to the control group. Regarding the failure mode, adhesive failure occurred primarily in groups C and A, and mixed failure mainly in groups P, PA, PS, and PPS. CONCLUSION. The shear bond strength between the 3D-printed denture base and the chairside relining material exhibited significant differences according to the surface treatment methods. It is believed that excellent adhesive strength will be obtained when the Rocatec system is applied to 3D-printed dentures in clinical practice.

Abstract

PURPOSE. This study aimed to analyze the shear bond strength between the 3D-printed denture base and the chairside relining material, according to the surface treatment. MATERIALS AND METHODS. Cylindrical specimens were prepared using DENTCA Denture Base II. The experimental groups were divided into 6 (n = 10): no surface treatment (C), Tokuyama Rebase II Normal adhesive (A), sandblasting (P), sandblasting and adhesive (PA), sandblasting and silane (PS), and the Rocatec system (PPS). After bonding the chairside relining material to the center of the specimens in a cylindrical shape, they were stored in distilled water for 24 hours. Shear bond strength was measured using a universal testing machine, and failure mode was analyzed with a scanning electron microscope. Shear bond strength values were analyzed using one-way analysis of variance, and Tukey’s honest significant difference test was used for post-hoc analysis (P < .05). RESULTS. Group PPS exhibited significantly higher shear bond strength than all other groups. Groups P and PA displayed significantly higher bond strengths than the control group. There were no significant differences between groups PS and A compared to the control group. Regarding the failure mode, adhesive failure occurred primarily in groups C and A, and mixed failure mainly in groups P, PA, PS, and PPS. CONCLUSION. The shear bond strength between the 3D-printed denture base and the chairside relining material exhibited significant differences according to the surface treatment methods. It is believed that excellent adhesive strength will be obtained when the Rocatec system is applied to 3D-printed dentures in clinical practice.

참고문헌 (45)

  1. Al-Rafee MA, "The epidemiology of edentulism and the associated factors : A literature review", J Family Med Prim Care, 9, pp.1841~1843 (2020)
  2. Douglass CW, "Will there be a need for complete dentures in the United States in 2020?", J Prosthet Dent, 87, pp.5~8 (2002)
  3. Saponaro PC, "Clinical performance of CAD-CAM-fabricated complete dentures : A cross-sectional study", J Prosthet Dent, 116, pp.431~435 (2016)
  4. Bidra AS, "Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives", J Prosthet Dent, 109, pp.361~366 (2013)
  5. Goodacre CJ, "CAD", CAM fabricated complete dentures : concepts and clinical methods of obtaining required morphological data, 2012, pp.107, 34~46
  6. Goodacre BJ, "Comparison of denture base adaptation between CAD-CAM and conventional fabrication techniques", J Prosthet Dent, 116, pp.249~256 (2016)
  7. Kattadiyil MT, "An update on computer-engineered complete dentures : A systematic review on clinical outcomes", J Prosthet Dent, 117, pp.478~485 (2017)
  8. Infante L, "Fabricating complete dentures with CAD", CAM technology, 2014, pp.111, 351~355
  9. Janeva NM, "Advantages of CAD", CAM versus conventional complete dentures-a review, 2018, pp.6, 1498~1502
  10. 이동형, "Comparison of flexural strength according to thickness between CAD", CAM denture base resins and conventional denture base resins, 2020, pp.36(3), 183~195[DOI]
  11. Azari A, "The evolution of rapid prototyping in dentistry : a review", Rapid Prototyp J, 15, pp.216~225 (2009)
  12. Alharbi N, "Additive manufacturing techniques in prosthodontics: Where do we currently stand? A critical review", Int J Prosthodont, 30, pp.474~484 (2017)
  13. You SG, "Evaluation of the adaptation of complete denture metal bases fabricated with dental CAD-CAM systems : An in vitro study", J Prosthet Dent, 125, pp.479~485 (2021)
  14. He Y, "Developments of 3D printing microfluidics and applications in chemistry and biology : a review", Electroanalysis, 28, pp.1658~1678 (2016)
  15. 이상호, "의료 3D 프린팅 기술의 전망 및 소아치과분야에서의 활용", 대한소아치과학회지, 43(1), pp.93~108 (2016), 대한소아치과학회[DOI]
  16. Tallgren A, "The continuing reduction of the residual alveolar ridges in complete denture wearers : a mixed-longitudinal study covering 25 years", J Prosthet Dent, 27, pp.120~132 (1972)
  17. Christensen FT, "Relining techniques for complete dentures", J Prosthet Dent, 26, pp.373~381 (1971)
  18. Leles CR, "Bonding strength between a hard chairside reline resin and a denture base material as influenced by surface treatment", J Oral Rehabil, 28, pp.1153~1157 (2001)
  19. 김효성, "적층가공과 절삭가공으로 제작한 의치상과 직접 첨상용 레진 간의 인장결합강도 비교", 대한치과보철학회지, 58(3), pp.177~184 (2020), 대한치과보철학회[DOI]
  20. Awad AN, "Comparison of tensile bond strength of denture reline materials on denture bases fabricated with CAD-CAM technology", J Prosthet Dent, 6 (2021)
  21. al-Athel MS, "Effect of test method on the bond strength of a silicone resilient denture lining material", J Prosthet Dent, 76, pp.535~540 (1996)
  22. Choi JE, "Adhesive evaluation of three types of resilient denture liners bonded to heat-polymerized, autopolymerized, or CAD-CAM acrylic resin denture bases", J Prosthet Dent, 120, pp.699~705 (2018)
  23. Palitsch A, "Bonding of acrylic denture teeth to MMA", PMMA and light-curing denture base materials : the role of conditioning liquids, 2012, pp.40, 210~221
  24. "ISO 10139-2. Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use", International Standards Organization (ISO), ~ (2016)
  25. Wemken G, "Bond strength of conventional, subtractive, and additive manufactured denture bases to soft and hard relining materials", Dent Mater, 37, pp.928~938 (2021)
  26. Vallittu PK, "Swelling of poly(methyl methacrylate)resin at the repair joint", Int J Prosthodont, 10, pp.254~258 (1997)
  27. Vallittu PK, "The swelling phenomenon of acrylic resin polymer teeth at the interface with denture base polymers", J Prosthet Dent, 78, pp.194~199 (1997)
  28. Sarac YS, "The effect of chemical surface treatments of different denture base resins on the shear bond strength of denture repair", J Prosthet Dent, 94, pp.259~266 (2005)
  29. Quaas AC, "0 bonding to contaminated zirconia ceramic after different cleaning procedures", Dent Mater, 23, pp.506~512 (2007)
  30. Li P, "Repairability of a 3D printed denture base polymer : Effects of surface treatment and artificial aging on the shear bond strength", J Mech Behav Biomed Mater, 114, pp.104227~ (2021)
  31. 임나경, "Bonding of conventional provisional resin to 3D printed resin: the role of surface treatments and type of repair resins", The Journal of Advanced of Prosthodontics, 12(5), pp.322~328 (2020), 대한치과보철학회[DOI]
  32. Papacchini F, "Effect of intermediate agents and pre-heating of repairing resin on composite-repair bonds", Oper Dent, 32, pp.363~371 (2007)
  33. Zhang H, "Effect of oxygen plasma treatment on the bonding of a soft liner to an acrylic resin denture material", Dent Mater J, 29, pp.398~402 (2010)
  34. Akin H, "Effect of sandblasting with different size of aluminum oxide particles on tensile bond strength of resilient liner to denture base", Cumhuriyet Dent J, 14, pp.5~11 (2011)
  35. Debnath S, "Silane treatment effects on glass", resin interfacial shear strengths, 2003, pp.19, 441~448
  36. 정기원, "Influence of surface treatments and repair materials on the shear bond strength of CAD", CAM provisional restorations, 2019, pp.11(2), 95~104[DOI]
  37. Bayati OH, "Tensile bond strengths of silicone soft liners to two chemically different denture base resins", Int J Adhes, 34, pp.32~37 (2012)
  38. 최에스더, "Silane coupling agent인 MPS 농도별처리에 따른 열중합 레진과 자가중합 레진 간의 전단결합강도", 한국콘텐츠학회 논문지, 15(2), pp.344~351 (2015), 한국콘텐츠학회[DOI]
  39. Kim YS, "Stduy on the surface morphologe and shear bond strength of in-ceram core to resin cement after varing modes of surface conditioning", J Korean Acad Prosthodont, 33, pp.693~704 (1995)
  40. Heikkinen TT, "Effect of operating air pressure on tribochemical silica-coating", Acta Odontol Scand, 65, pp.241~248 (2007)
  41. 박경석, "지르코니움 세라믹에서 표면 처리 방법이 레진 시멘트의 접착력에 미치는 영향", 구강회복응용과학지, 22(3), pp.221~230 (2006), 대한턱관절교합학회
  42. Kümbüloğ lu Ö, "Adhesion potential of relining materials to polyamide and PMMA-based denture base materials : effect of surface conditioning methods", J Adhes Sci Technol, 33, pp.1939~1947 (2019)
  43. Kern M, "Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition", J Prosthet Dent, 71, pp.453~461 (1994)
  44. Silva Cde S, "Effect of thermal cycling on denture base and autopolymerizing reline resins", J Appl Oral Sci, 21, pp.219~224 (2013)
  45. Placido E, "Shear versus micro-shear bond strength test : a finite element stress analysis", Dent Mater, 23, pp.1086~1092 (2007)

관련 논문AI추천

Effect of repair methods and materials on the flexural strength of 3D-printed denture base resinAna Carolina Pero, Hamile Emanuella do Carmo Viotto, Marcela Dantas Dias Silva, Sabrina Romão Gonçalves Coelho, Thaís Soares Bezerra Santos Nunes대한치과보철학회 · The Journal of Advanced of Prosthodontics2022 · 제14권 제5호3D 프린팅 방식으로 제작한 의치상용 레진의 표면처리에 따른 수리용 레진과의 전단결합강도 및 파절양상에 대한 비교 연구이선학, 이준석대한치과보철학회 · 대한치과보철학회지2025 · 제63권 제4호Effect of surface treatment methods on the shear bond strength of autopolymerized resin to thermoplastic denture base polymerAli Hafezeqoran, Roodabeh Koodaryan대한치과보철학회 · The Journal of Advanced of Prosthodontics2016 · 제8권 제6호인공치의 표면처리가 3D 프린팅 의치상레진과의 전단결합강도에 미치는 영향권긍록, 김형섭, 노관태, 배아란, 백장현, 이영후, 최지혜, 홍성진대한치과보철학회 · 대한치과보철학회지2020 · 제58권 제4호3D-프린팅 의치상 레진과 열중합 의치상 레진에서의 의치 첨상 재료 간의 전단결합강도 비교 연구송영균, 조성윤대한턱관절교합학회 · 구강회복응용과학지2021 · 제37권 제4호Shear bond strength between CAD/CAM denture base resin and denture artificial teeth when bonded with resin cement문윤희, 이종혁, 한상연대한치과보철학회 · The Journal of Advanced of Prosthodontics2020 · 제12권 제5호

이 간행물의 다른 논문 (5건)

Rating criteria to evaluate student performance in digital wax-up training using multi-purpose softwareKen Numoto, Shinichi Nakanoda, Takaharu Higuchi, Kana Tokumoto, Yoko Kurosaki, Takuya Mino, Takuo Kuboki, Tae Hyung Kim, Kenji Maekawa, Aya Kimura-Ono, Ikue Tosapp. 203-211Conventional and digital impressions for complete-arch implant-supported fixed prostheses: time, implant quantity effect and patient satisfactionAna Larisse Carneiro Pereira, Vitória Ramos Medeiros, Maria de Fátima Trindade Pinto Campos, Annie Karoline Bezerra de Medeiros, Burak Yilmaz, Adriana da Fonte Porto Carreiropp. 212-222A retrospective comparison of clinical outcomes of implant restorations for posterior edentulous area: 3-unit bridge supported by 2 implants vs 3 splinted implant-supported crowns이유승, 김성균, 곽재영, 허성주pp. 223-235Comparison of accuracy between digital and conventional implant impressions: two and three dimensional evaluationsChuang Bi, Jiaming Zhao, Zhe Qu, Fangfang Tian, Xingyu Wangpp. 236-249Investigation of the marginal fit of a 3D-printed three-unit resin prosthesis with different build orientations and layer thicknesses허성주, 박지만, 김성균, 양민성, 곽재영pp. 250-261
원문 보기