Three-dimensional morphometric study on the retromolar pad
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. The aim of this study was to classify the shapes of retromolar pads and assess their morphometric differences using a 3D model. MATERIALS AND METHODS. Two hundred fully edentulous or Kennedy Class I partially edentulous patients (400 retromolar pads) were enrolled. Scan data of the definitive mandibular casts produced through functional impressions were obtained using a 3D laser scanner. Seven parameters (transverse diameter, longitudinal diameter, transverse-contour length, longitudinal-contour length, longitudinal/transverse diameter ratio, longitudinal/transverse-contour length ratio, and angle of the retromolar pad line to the residual alveolar ridge line) were measured using image analysis software. Subsequently, the pads were classified according to the shape. Statistical analyses were performed using 95% confidence intervals. RESULTS. Classifying the retromolar pads into three shapes led to high intra-examiner reliability (Cronbach’s alpha = 0.933). The pear shape was the most common (56.5%), followed by oval/round (27.7%) and triangular (15.8%) shapes. There were no significant differences between the left and right sides according to the shape and no significant differences in any parameter according to age. The transverse diameter and longitudinal/transverse diameter ratio differed between sexes (P < .05). The triangular shape had a significantly different transverse diameter, transverse-contour length, longitudinal/transverse diameter ratio, and longitudinal/transverse-contour length ratio compared with the pear and oval/round shapes (P < .05). CONCLUSION. From a clinical reliability standpoint, classifying retromolar pads into three shapes (oval/round, pear-shaped, and triangular) is effective. The differences in the sizes among the shapes were attributed to the transverse measurement values.
Abstract
PURPOSE. The aim of this study was to classify the shapes of retromolar pads and assess their morphometric differences using a 3D model. MATERIALS AND METHODS. Two hundred fully edentulous or Kennedy Class I partially edentulous patients (400 retromolar pads) were enrolled. Scan data of the definitive mandibular casts produced through functional impressions were obtained using a 3D laser scanner. Seven parameters (transverse diameter, longitudinal diameter, transverse-contour length, longitudinal-contour length, longitudinal/transverse diameter ratio, longitudinal/transverse-contour length ratio, and angle of the retromolar pad line to the residual alveolar ridge line) were measured using image analysis software. Subsequently, the pads were classified according to the shape. Statistical analyses were performed using 95% confidence intervals. RESULTS. Classifying the retromolar pads into three shapes led to high intra-examiner reliability (Cronbach’s alpha = 0.933). The pear shape was the most common (56.5%), followed by oval/round (27.7%) and triangular (15.8%) shapes. There were no significant differences between the left and right sides according to the shape and no significant differences in any parameter according to age. The transverse diameter and longitudinal/transverse diameter ratio differed between sexes (P < .05). The triangular shape had a significantly different transverse diameter, transverse-contour length, longitudinal/transverse diameter ratio, and longitudinal/transverse-contour length ratio compared with the pear and oval/round shapes (P < .05). CONCLUSION. From a clinical reliability standpoint, classifying retromolar pads into three shapes (oval/round, pear-shaped, and triangular) is effective. The differences in the sizes among the shapes were attributed to the transverse measurement values.
참고문헌 (30)
- Gupta R, "Relationship of anatomic landmarks with occlusal plane", J Indian Prosthodont Soc, 9, pp.142~147 (2009)
- Nissan J, "Relationship between occlusal plane determinants and craniofacial structures", J Oral Rehabil, 30, pp.587~591 (2003)
- Monteith BD, "A cephalometric method to determine the angulation of the occlusal plane in edentulous patients", J Prosthet Dent, 54, pp.81~87 (1985)
- Shigli K, "Validity of soft tissue landmarks in determining the occlusal plane", J Indian Prosthodont Soc, 5, pp.139~145 (2005)
- Sicher H, "Oral anatomy", pp.179~181 (1970), Mosby
- Zarb G, "Prosthodontic treatment for edentulous patients", pp.167~168 (2013), Elsevier Mosby
- Sharma A, "Assessment and evaluation of anatomic variations of retromolar pad : a cross sectional study", J Clin Diagn Res, 10, pp.ZC143~5 (2016)
- Martone AL, "Anatomy of mouth and its related structures", J Prosthet Dent, 12, pp.817~834 (1962)
- Pendleton EC, "The minute anatomy of the denture bearing area", J Am Dent Assoc, 21, pp.488~504 (1934)
- Pietrokovski J, "Retromolar ridge in edentulous patients : clinical considerations", J Prosthodont, 16, pp.502~506 (2007)
- Wright WH, "Selection and arrangement of artificial teeth for complete prosthetic dentures", J Am Dent Assoc, 23, pp.2291~2307 (1936)
- Ismail YH, "Position of the occlusal plane in natural and artificial teeth", J Prosthet Dent, 20, pp.407~411 (1968)
- Hall WA, "Important factors in adequate denture occlusion", J Prosthet Dent, 8, pp.764~775 (1958)
- Lundquist DO, "Occlusal plane determination", J Prosthet Dent, 23, pp.489~498 (1970)
- Grandage DS, "Anatomy of the lingual vestibule and its influence on denture borders", Anat Physiol, 3, pp.3~122 (2013)
- López FB, "Biometrics study of the retromolar pad", Int J Odontostomat, 2, pp.39~42 (2008)
- Pound E, "Recapturing esthetic tooth position in the edentulous patient", J Am Dent Assoc, 55, pp.181~191 (1957)
- Suazo GI, "Morphometric study of the retromolar triangle", Int J Odontostomat, 1, pp.129~132 (2007)
- Iwanaga J, "How to avoid iatrogenic lingual nerve injury in the retromolar area : an anatomical study of retromolar pad and lingual nerve", Surg Radiol Anat, 42, pp.523~528 (2020)
- Zargar NM, "Evaluation of shapes of retromolar pad in Kashmiri edentulous patients. a crosssectional study", Int J Sci Res, 8, pp.65~66 (2019)
- Solomon EG, "A critical analysis of complete denture impression procedures : contribution of early prosthodontists in India-part I", J Indian Prosthodont Soc, 11, pp.172~182 (2011)
- 장갑수, "한국인과 이집트인의 치열궁 형태 비교", 대한치과교정학회지, 40(5), pp.334~341 (2010), 대한치과교정학회
- Haralabakis NB, "The correlation of sexual dimorphism in tooth size and arch form", World J Orthod, 7, pp.254~260 (2006)
- Wyatt CC, "The effect of prosthodontic treatment on alveolar bone loss : a review of the literature", J Prosthet Dent, 80, pp.362~366 (1998)
- Ichikawa M, "Report on establishing the base outline of mandibular complete denture obtained from measurements of denture base dislodging and retraction force(1st report) : Discussion on retentive force from coverage difference with a denture base over the retromolar pad", J Acad Clin Dent, 32, pp.57~64 (2012)
- Wright CR, "Evaluation of the factors necessary to develop stability in mandibular dentures", J Prosthet Dent, 16, pp.414~430 (1966)
- Gruber H, "Endosseous Implants. Scientific and clinical aspects", pp.29~62 (1996), Quintessence
- Zilberman O, "Evaluation of the validity of tooth size and arch width measurements using conventional and three-dimensional virtual orthodontic models", Angle Orthod, 73, pp.301~306 (2003)
- Kook YA, "Comparison of arch forms between Korean and North American white populations", Am J Orthod Dentofacial Orthop, 126, pp.680~686 (2004)
- Kil-jun Lee, "Comparison of mandibular arch forms of Korean and Vietnamese patients by using facial axis points on three-dimensional models", 대한치과교정학회지, 43(6), pp.288~293 (2013), 대한치과교정학회