Radiomorphometric analysis of edentulous posterior mandibular ridges in the first molar region: a cone-beam computed tomography study
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: The aim of our study was to determine the prevalence and degree of lingual concavities in the first molar region of the mandible to reduce the risk of perforating the lingual cortical bone during dental implant insertion. Methods: A total of 163 suitable cross-sectional cone-beam computed tomography images of edentulous mandibular first molar regions were evaluated. The mandibular morphology was classified as a U-configuration (undercut), a P-configuration (parallel), or a C-configuration (convex), depending on the shape of the alveolar ridge. The characteristics of lingual concavities, including their depth, angle, vertical location, and additional parameters, were measured. Results: Lingual undercuts had a prevalence of 32.5% in the first molar region. The mean concavity angle was 63.34°±8.26°, and the mean linear concavity depth (LCD) was 3.03±0.99 mm. The mean vertical distances of point P from the alveolar crest (Vc) and from the inferior mandibular border were 9.39±3.39 and 16.25±2.44, respectively. Men displayed a larger vertical height from the alveolar crest to 2 mm coronal to the inferior alveolar nerve (Vcb) and a wider LCD than women ( P <0.05). Negative correlations were found between age and buccolingual width at 2 mm apical to the alveolar crest, between age and Vcb, between age and Vc, and between age and LCD ( P <0.05). Conclusions: The prevalence of lingual concavities was 32.5% in this study. Age and gender had statistically significant effects on the lingual morphology. The risk of lingual perforation was higher in young men than in the other groups analyzed.
Abstract
Purpose: The aim of our study was to determine the prevalence and degree of lingual concavities in the first molar region of the mandible to reduce the risk of perforating the lingual cortical bone during dental implant insertion. Methods: A total of 163 suitable cross-sectional cone-beam computed tomography images of edentulous mandibular first molar regions were evaluated. The mandibular morphology was classified as a U-configuration (undercut), a P-configuration (parallel), or a C-configuration (convex), depending on the shape of the alveolar ridge. The characteristics of lingual concavities, including their depth, angle, vertical location, and additional parameters, were measured. Results: Lingual undercuts had a prevalence of 32.5% in the first molar region. The mean concavity angle was 63.34°±8.26°, and the mean linear concavity depth (LCD) was 3.03±0.99 mm. The mean vertical distances of point P from the alveolar crest (Vc) and from the inferior mandibular border were 9.39±3.39 and 16.25±2.44, respectively. Men displayed a larger vertical height from the alveolar crest to 2 mm coronal to the inferior alveolar nerve (Vcb) and a wider LCD than women ( P <0.05). Negative correlations were found between age and buccolingual width at 2 mm apical to the alveolar crest, between age and Vcb, between age and Vc, and between age and LCD ( P <0.05). Conclusions: The prevalence of lingual concavities was 32.5% in this study. Age and gender had statistically significant effects on the lingual morphology. The risk of lingual perforation was higher in young men than in the other groups analyzed.
참고문헌 (29)
- Rajput BS, "Assessment of lingual concavities in submandibular fossa region in patients requiring dental implants-A cone beam computed tomography study", J Contemp Dent Pract, 19, pp.1329~1333 (2018)
- Panjnoush M, "Evaluation of the concavity depth and inclination in jaws using CBCT", Caspian J Dent Res, 5, pp.17~23 (2016)
- Kalpidis CD, "Critical hemorrhage in the floor of the mouth during implant placement in the first mandibular premolar position : a case report", Implant Dent, 14, pp.117~124 (2005)
- de Souza LA, "Assessment of mandibular posterior regional landmarks using cone-beam computed tomography in dental implant surgery", Ann Anat, 205, pp.53~59 (2016)
- Tyndall DA, "Position statement of the American Academy of Oral and Maxillofacial Radiology on selection criteria for the use of radiology in dental implantology with emphasis on cone beam computed tomography", Oral Surg Oral Med Oral Pathol Oral Radiol, 113, pp.817~826 (2012)
- Zohrabian VM, "Dental Implants", Semin Ultrasound CT MR, 36, pp.415~426 (2015)
- Aranyarachkul P, "Bone density assessments of dental implant sites: 2. Quantitative cone-beam computerized tomography", Int J Oral Maxillofac Implants, 20, pp.416~424 (2005)
- Naitoh M, "Evaluation of voxel values in mandibular cancellous bone : relationship between cone-beam computed tomography and multislice helical computed tomography", Clin Oral Implants Res, 20, pp.503~506 (2009)
- Sammartino G, "Analysis of the occlusal stress transmitted to the inferior alveolar nerve by an osseointegrated threaded fixture", J Periodontol, 79, pp.1735~1744 (2008)
- Chiapasco M, "Clinical outcome of autogenous bone blocks or guided bone regeneration with e-PTFE membranes for the reconstruction of narrow edentulous ridges", Clin Oral Implants Res, 10, pp.278~288 (1999)
- Chan HL, "Cross-sectional analysis of the mandibular lingual concavity using cone beam computed tomography", Clin Oral Implants Res, 22, pp.201~206 (2011)
- Leong DJ, "Risk of lingual plate perforation during implant placement in the posterior mandible : a human cadaver study", Implant Dent, 20, pp.360~363 (2011)
- Dubois L, "Excessive bleeding in the floor of the mouth after endosseus implant placement : a report of two cases", Int J Oral Maxillofac Surg, 39, pp.412~415 (2010)
- Loukas M, "Anatomical variation in arterial supply of the mandible with special regard to implant placement", Int J Oral Maxillofac Surg, 37, pp.367~371 (2008)
- Tomljenovic B, "Life-threatening hemorrhage associated with dental implant surgery : a review of the literature", Clin Oral Implants Res, 27, pp.1079~1084 (2016)
- Flanagan D, "Important arterial supply of the mandible, control of an arterial hemorrhage, and report of a hemorrhagic incident", J Oral Implantol, 29, pp.165~173 (2003)
- Huang RY, "Risk of lingual plate perforation for virtual immediate implant placement in the posterior mandible : a computer simulation study", J Am Dent Assoc, 146, pp.735~742 (2015)
- Froum S, "Risk assessment before extraction for immediate implant placement in the posterior mandible : a computerized tomographic scan study", J Periodontol, 82, pp.395~402 (2011)
- Herranz-Aparicio J, "Retrospective study of the bone morphology in the posterior mandibular region. Evaluation of the prevalence and the degree of lingual concavity and their possible complications", Med Oral Patol Oral Cir Bucal, 21, pp.e731~e736 (2016)
- Nickenig HJ, "Lingual concavities in the mandible : a morphological study using cross-sectional analysis determined by CBCT", J Craniomaxillofac Surg, 43, pp.254~259 (2015)
- Kamburoğlu K, "CBCT quantitative evaluation of mandibular lingual concavities in dental implant patients", Surg Radiol Anat, 37, pp.1209~1215 (2015)
- Quirynen M, "Morphology and dimensions of the mandibular jaw bone in the interforaminal region in patients requiring implants in the distal areas", Clin Oral Implants Res, 14, pp.280~285 (2003)
- Aranha Watanabe PC, "Morphodigital evaluation of the trabecular bone pattern in the mandible using digitized panoramic and periapical radiographs", Minerva Stomatol, 58, pp.73~80 (2009)
- Ou CY, "Morphologic analysis of mandibular lingual concavity by computed tomography image in Taiwan population", J Taiwan Periodontol, 17, pp.191~197 (2012)
- Parnia F, "Tomographic volume evaluation of submandibular fossa in patients requiring dental implants", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 109, pp.e32~6 (2010)
- Braut V, "Bone dimensions in the posterior mandible: a retrospective radiographic study using cone beam computed tomography. Part 1--analysis of dentate sites", Int J Periodontics Restorative Dent, 32, pp.175~184 (2012)
- Salemi F, "Mandibular lingual concavity : a cross-sectional analysis using cone beam computed tomography", J Clin Diagn Res, 12, pp.ZC37~41 (2018)
- Borahan MO, "Assesment of submandibular fossa depth using cone beam computed tomography", Yeditepe J Dent, 14, pp.51~56 (2018)
- Uchida Y, "Anatomic measurement of the depth and location of the sublingual fossa", Int J Oral Maxillofac Surg, 41, pp.1571~1576 (2012)