사각채널에서 사다리꼴 와류발생기에 의한 열전달 촉진에 대한 수치해석
Numerical Study on the Heat Transfer Enhancement of Trapezoidal Vortex Generator in a Rectangular Channel
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Vortex Generators are used in heat exchanger to enhance the heat transfer of air side. 3-D numerical analysis is performed on heat transfer characteristics of a channel with trapezoidal vortex generator. We investigate the effects of vortex generators with two different inclined angles to flow direction which are forward and backward vortex generators. The thermal hydraulic performance such as Nu and pressure drop, iscompared quantitatively. The results show that vortex generator enhances the heat transfer by developing boundary layers and secondary flow in the downstream. The downwash flow region corresponds to the maximum Nu, while the upwash flow region corresponds to Nu minimum. In the view of the heat transfer characteristics, FVG is better than BVG. However, when flow is turbulent as Re increases, the pressure dropfor FVG is higher than that for BVG.
Abstract
Vortex Generators are used in heat exchanger to enhance the heat transfer of air side. 3-D numerical analysis is performed on heat transfer characteristics of a channel with trapezoidal vortex generator. We investigate the effects of vortex generators with two different inclined angles to flow direction which are forward and backward vortex generators. The thermal hydraulic performance such as Nu and pressure drop, iscompared quantitatively. The results show that vortex generator enhances the heat transfer by developing boundary layers and secondary flow in the downstream. The downwash flow region corresponds to the maximum Nu, while the upwash flow region corresponds to Nu minimum. In the view of the heat transfer characteristics, FVG is better than BVG. However, when flow is turbulent as Re increases, the pressure dropfor FVG is higher than that for BVG.
참고문헌 (8)
- 김제영, "나선형 EGR Cooler의 Pitch 길이 변화에 따른 열전달 특성에 관한 수치 해석", 한국기계기술학회지, 17(5), pp.949~954 (2015), 한국기계기술학회[DOI]
- A. M. Jacobi, "Heat Transfer Surface Enhancement Through the Use of Longitudinal Vortices : A Review of Recent Progress", Experimental Thermal and Fluid Science, 11, pp.295~309 (1995)
- M. Fiebig, "Embedded Vortices in Internal Flow : Heat Transfer and Pressure loss Enhancement", International Journal Heat and Fluid Flow, 16, pp.376~388 (1995)
- G. Zhou, "Experimental investigations of thermal and flow characteristics of curved trapezoidal winglet type vortex generators", Applied Thermal Engineering, 37, pp.241~248 (2012)
- Visualization of the Heat Transfer Surface of EGR Cooler to Examine Soot Adhesion and Abruption Phenomena, "N. Matsudaira", SAE, ~, pp.SAE Technical Paper 2017-01-0127 (2017)
- J. Hara, "Analysis of Unsteady Flow for Vortex generator Development for Heat exchangers", Vehicle Thermal Management Systems Conference and Exhibition, pp.89~105 (2015)
- H. M. Kaci, "Flow structure and heat transfer induced by embedded vorticity", International Journal of Heat and Mass transfer, 53, pp.3575~3584 (2010)
- 오영민, "루버 각도에 따른 차량용 루버핀 열교환기의 성능에 대한 3차원 수치 해석", 한국기계기술학회지, 19(2), pp.235~241 (2017), 한국기계기술학회[DOI]