삼각 그루브 채널의 유동특성에 관한 실험적 연구
An Experimental Study on Flow Characteristics of Triangular Grooved Channel
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, we modeled a actual shape of a plate heat exchanger into triangular grooved channel and tried to examine flow characteristics experimentally by particle image velocimetry. Five Reynolds numbers were selected with the height of grooved channel and sectional mean velocity of inlet flow. As a result, the triangular grooved channel had a compound flow consisting of the flow in lower channel and the groove flow receiving shear stress by the channel flow. The sheared mixing layer, in the boundary between the triangular groove and the channel, affected main flow to raise turbulent in the channel.
Abstract
In this study, we modeled a actual shape of a plate heat exchanger into triangular grooved channel and tried to examine flow characteristics experimentally by particle image velocimetry. Five Reynolds numbers were selected with the height of grooved channel and sectional mean velocity of inlet flow. As a result, the triangular grooved channel had a compound flow consisting of the flow in lower channel and the groove flow receiving shear stress by the channel flow. The sheared mixing layer, in the boundary between the triangular groove and the channel, affected main flow to raise turbulent in the channel.
참고문헌 (12)
- H. M. Metally, "En hanced heat transfer due to cuvature induced lateral vortices in laminar flows in sinusoidal corrugatedplate channels", Heat and Mass Transfer, 47, pp.2283~2292 (2004)
- T. Nishimura, "Influence of Imposed Oscillatory on the Mass Transfer Enhancement of Grooved Channels for Pulsatile Flow", Int. J. Heat Mass Transfer, 43(3), pp.2065~2374 (2000)
- S. Y. Kim, "Forced Convection Heat Transfer from Blocks in Pulsating Channel Flow", Int. J. Heat Mass Transfer, 41(3), pp.625~634 (1998)
- S. Y. Kim, "Thermal Interaction between Isolated Heated Electronic Components in Pulsating Channel Flow", Numerical Heat Transfer, Part A, 34, pp.1~21 (1998)
- B. S. Lee, "Chaotic Mixing and Mass Transfer Enhancement by Pulsatile Flow in an Axisymmetric Wavy Channel", Int. J. Heat Mass Transfer, 42, pp.2571~2581 (1999)
- M. Greiner, "Heat Transfer Augmentation through Wall Shape Induced Flow Destabilization", J. Heat Transfer, 112, pp.336~341 (1990)
- Y. H. Lee, "PIV Measurement of Cubic Cavity Driven by 2-D Plane Poiseuille Flow", Proc. 3rd J, 1994, 335~340
- G. Mansell, "Liquid-Liquid Driven Cavity Flow", J. Comput. Phys, 110, pp.274~284 (1994)
- M. Greiner, "An Experimental Investigation of Resonant Heat Transfer Enhancement in Grooved Channels", Int. J. Heat Mass Transfer, 34(6), pp.1383~1391 (1991)
- O. J. Kwon, "An Experimental Study on the Heat Transfer Enhancement by Pulsatile Flow in a Triangular Grooved Channel", J. of the SAREK, 13(10), pp.1009~1017 (2001)
- 이철재, "A Study on Velocity and Pressure Characteristics Behind the Rectangular Resistance Body of Rectangular Shape", 한국기계기술학회지, 12(4), pp.107~116 (2010), 한국기계기술학회
- 이철재, "광각디퓨저의 내부에 설치된 장방형 각주를 이용한 유동제어에 관한 연구", 한국기계기술학회지, 13(4), pp.57~62 (2011), 한국기계기술학회