사다리꼴 와류발생기의 경사각과 충돌각이 열전달 성능에 미치는 영향에 대한 수치해석
Numerical study on the Effect of Inclination Angle and Attack Angle on Heat Transfer Performance of Trapezoidal Vortex Generator
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The effect of inclination angle and attack angle on heat transfer enhancement of trapezoidal vortex generator was numerically investigated. The commercial package STAR-CCM+ was utilized to analyze the heat transfer and flow characteristics with various inclination and attack angle of vortex generator. The result shows that the optimum inclination angles are =30°~40° in terms of the heat transfer and pressure drop. At more than 40° of inclination angle, the transverse vortex is dominant, so that the pressure drop is severe and the heat transfer is reduced. As the attack angle is increased, the transverse vortex is reduced, so that the pressure drop is improved. The optimum attack angle is =30° because the heat transfer performance is maintained. However, more than 30° of attack angle, the heat transfer is decreasing.
Abstract
The effect of inclination angle and attack angle on heat transfer enhancement of trapezoidal vortex generator was numerically investigated. The commercial package STAR-CCM+ was utilized to analyze the heat transfer and flow characteristics with various inclination and attack angle of vortex generator. The result shows that the optimum inclination angles are =30°~40° in terms of the heat transfer and pressure drop. At more than 40° of inclination angle, the transverse vortex is dominant, so that the pressure drop is severe and the heat transfer is reduced. As the attack angle is increased, the transverse vortex is reduced, so that the pressure drop is improved. The optimum attack angle is =30° because the heat transfer performance is maintained. However, more than 30° of attack angle, the heat transfer is decreasing.
참고문헌 (7)
- M. Fiebig, "Embedded Vortices in Internal Flow : Heat Transfer and Pressure loss Enhancement", International Journal Heat and Fluid Flow, 16, pp.376~388 (1995)
- 정재동, "와류발생기의 충돌각과 루버각의 상호작용에 의한 열전달촉진", 설비공학 논문집, 14(6), pp.5~484 (2002), 대한설비공학회
- J. Hara, "Analysis of Unsteady Flow for Vortex generator Development for Heat exchangers", Vehicle Thermal Management Systems Conference and Exhibition, pp.89~105 (2015)
- S. Ogawa, "Heat Transfer Enhancement by Vortex Generators for Compact Heat Exchanger of Automobiles", Open Journal of Fluid Dynamics, 8, pp.321~330 (2018)
- 박태환, "사각채널에서 사다리꼴 와류발생기에 의한 열전달 촉진에 대한 수치해석", 한국기계기술학회지, 20(6), pp.852~857 (2018), 한국기계기술학회[DOI]
- H. M. Kaci, "Flow structure and heat transfer induced by embedded vorticity", International Journal of Heat and Mass transfer, 53, pp.3575~3584 (2010)
- 오영민, "루버 각도에 따른 차량용 루버핀 열교환기의 성능에 대한 3차원 수치 해석", 한국기계기술학회지, 19(2), pp.235~241 (2017), 한국기계기술학회[DOI]