냉간압축 성형기를 사용한 고압용 소구경 배관 제작
Manufacture of Small Diameter Pipe for high Pressure using Cold Compression Forming Machine
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, in order to manufacture STS 316L seamless pipes with 18mm, 25mm, and 42mm diameters that can be used for high pressure, we intend to make predictions through design and finite element analysis and produce real objects. It was measured to have the highest hardness value in the deformed part, and it is expected to be due to work hardening. It has been interpreted that plastic deformation does not occur up to 1,000bar for STS 316L seamless pipes with a diameter of 18mm and 25mm, but plastic deformation occurs at 900bar or more in STS 316L seamless pipes with a diameter of 42mm.
Abstract
In this study, in order to manufacture STS 316L seamless pipes with 18mm, 25mm, and 42mm diameters that can be used for high pressure, we intend to make predictions through design and finite element analysis and produce real objects. It was measured to have the highest hardness value in the deformed part, and it is expected to be due to work hardening. It has been interpreted that plastic deformation does not occur up to 1,000bar for STS 316L seamless pipes with a diameter of 18mm and 25mm, but plastic deformation occurs at 900bar or more in STS 316L seamless pipes with a diameter of 42mm.
참고문헌 (9)
- M. Y. Jung, "Mechanical Engineering Design", pp.825~827 (2015), Hakjin books
- 서위걸, "압축 가공된 비용접 배관의 소성변형 거동에 미치는 내압의 영향", 소성∙가공, 28(4), pp.175~182 (2019), 한국소성∙가공학회[DOI]
- 이용신, "이음매 없는 관 인발에서 맨드렐과 금형 형상의 영향", 소성∙가공, 20(8), pp.562~567 (2011), 한국소성∙가공학회
- 구경만, "스프링형상 와이어소재를 이용한 접합동시 파이프 압출성형공정 개발에 관한 연구", 소성∙가공, 24(5), pp.317~322 (2015), 한국소성∙가공학회
- 서석진, "충격 감쇄용 신축이음관의 상수도 배관 적용을 위한 구조 안정성 해석", 한국기계기술학회지, 21(5), pp.818~825 (2019), 한국기계기술학회[DOI]
- B. Brickstad, "A parametric study of residual stress in multi-pass butt- welded stainless steel pipes", Int. J. Press. Vessels pip., 75, pp.11~25 (2011)
- 이영식, "SUS 육각봉 인발성형용 가변형 롤유닛에 관한 구조해석 연구", 한국기계기술학회지, 19(6), pp.827~833 (2017), 한국기계기술학회[DOI]
- Y. Tomota, "Prediction of mechanical properties of multi phase steel based on sterss-strain curves", ISIJ Int, 32(3), pp.343~349 (1992)
- M. Fujita, "An Evaluation of mechanical properties with the Hardness of building steel structural members for reuse by NDT", Mater, 247, pp.1~13 (2016)