유압 배관용 스테인리스강관 파손 원인 분석 및 개선 연구
A Failure Analysis and Improvement Study of Stainless Pipes for Hydraulic Tube
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study is to deal with the cause analysis and improvement ideas for breakage to hydraulic pipes mounted on self-propelled howitzers. Hydraulic piping is one of the core components of a hydraulic system. This is because in the case of devices that use hydraulic pressure as a power source, hydraulic oil is supplied through hydraulic piping to operate. Compared to the main hydraulic assembly, its importance is low, so there are not many studies or failure analysis cases on it. However, contrary to this, cases of hydraulic pipe failure account for a significant proportion of the total number of failures, requiring in-depth technical review. In this study, we aim to analyze the causes of failures in hydraulic pipes of self-propelled guns operated by the military and propose improvement measures. It is expected that this study will aid as a reference for problem solving when similar failures occur in the future.
Abstract
This study is to deal with the cause analysis and improvement ideas for breakage to hydraulic pipes mounted on self-propelled howitzers. Hydraulic piping is one of the core components of a hydraulic system. This is because in the case of devices that use hydraulic pressure as a power source, hydraulic oil is supplied through hydraulic piping to operate. Compared to the main hydraulic assembly, its importance is low, so there are not many studies or failure analysis cases on it. However, contrary to this, cases of hydraulic pipe failure account for a significant proportion of the total number of failures, requiring in-depth technical review. In this study, we aim to analyze the causes of failures in hydraulic pipes of self-propelled guns operated by the military and propose improvement measures. It is expected that this study will aid as a reference for problem solving when similar failures occur in the future.
참고문헌 (14)
- Joon hyeok Ban, "An Experimental Research of Servo Valve Offset Correction Method of Hydraulic Actuator", Journal of Drive and Control, 16(2), pp.72~79 (2019)
- Jihwan Lee, "A Study for Development of Hydraulic Piston Pump for Driving Rescue Equipment", Journal of the KIMST, 21(3), pp.255~263 (2018)
- Doyun Lee, "Modeling and Simulation of A Small Hydraulic Actuation System for the Tactical Missile", J. of The Korean Society for Aeronautical and Space Sciences, 45(4), pp.349~357 (2017)
- Hyeeun Kim, "A Study on the Structural Strength Improvement of Hydraulic System for Combat Vehicle using ANSYS", Journal of the Korea Academia-Industrial cooperation Society, 23(11), pp.514~521 (2022)
- Kyungsoo Kim, "A Study on Life Prediction of Hydraulic Piston Pump", Journal of the KIMST, 21(5), pp.607~613 (2018)
- Young-sik Lee, "Structural Analysis on Clamp Guide Bar of Drawing Process System for SUS Hexagonal Bar", J. Korean Soc. Mech. Technol, 20(6), pp.796~802 (2018)
- Defense Acquisition Quality Control Regulation, "Defense Acquisition Program Administration", Defense Acquisition Program Administration, 25~29 (2023)
- Dae san Oh, "Failure Analysis by Fracture Study of Connecting Rod Bolts in Diesel Engine for Military Tracked Vehicles", Journal of the Korea Academia-Industrial cooperation Society, 21(7), pp.191~200 (2020)
- Sang Tae Kim, "Fractographic Analysis Method of Fatigue Fracture Surface under Program and Random Loading for Aluminum Alloy", Trans. Korean Soc. Mech. Eng. A, 27(12), pp.2055~2060 (2003)
- ChangHwan Han, "A Study on the Reliability and Maintainability Analysis Process for Aircraft Hydraulic System", Journal of KOSSE, 12(1), pp.105~112 (2016)
- Yoojeong Noh, "Statistical Life Prediction of Corroded Pipeline Using Bayesian Inference", Journal of the Korea Academia-Industrial cooperation Society, 16(4), pp.2401~2406 (2015)
- Jong Sung Kim, "Investigation of Residual Stress Distributions of Induction Heating Bended Austenitic Stainless Steel(316 Series)Piping", Trans. Korean Soc. Mech. Eng. A, 38(7), pp.809~815 (2014)
- Jeongman Park, "A Case Study on Failure and Analysis of Air Over Hydraulic Brake Line", Journal of Auto-Vehicle Safety Association, 12(2), pp.47~55 (2020)
- Hyuck Keun Oh, "Fatigue Analysis for Electro-Mechanical Brake Caliper based on Eccentric Rotating Shaft", Journal of the Korea Academia-Industrial cooperation Society, 21(9), pp.596~603 (2020)