레이저 용접 열원 모델 도출 시 소요시간 감소를 위한 간소화 모델 도출을 위한 연구 Part II : 용접 방향 길이 감소 모델
A Study on Simplified Model for Reducing Time During Deriving the Proper Laser Welding Heat Source Model Part II : Reduced model along welding direction
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Laser welding is used in various industries due to fast welding speed, and prediction with FEM is needed to design. The multi-layered heat source model that can cover various models has been recently proposed to analyze laser welding, but it takes a lot of time because more than 2,000 cases are compared to derive the results. In order to reduce the time, the simplified model should be suggested. In order to derive a simplified model, laser welding heat transfer analysis was performed using the welding direction length and the convection coefficient of the welding direction surface as parameters. As a result, the model whose difference is less than 0.1% compared to reference model is deducted. The analysis time was reduced by about 90% from 48 hours to 5 hours. Also difference of convection coefficient on the welding direction surface does not affect the temperature distribution much.
Abstract
Laser welding is used in various industries due to fast welding speed, and prediction with FEM is needed to design. The multi-layered heat source model that can cover various models has been recently proposed to analyze laser welding, but it takes a lot of time because more than 2,000 cases are compared to derive the results. In order to reduce the time, the simplified model should be suggested. In order to derive a simplified model, laser welding heat transfer analysis was performed using the welding direction length and the convection coefficient of the welding direction surface as parameters. As a result, the model whose difference is less than 0.1% compared to reference model is deducted. The analysis time was reduced by about 90% from 48 hours to 5 hours. Also difference of convection coefficient on the welding direction surface does not affect the temperature distribution much.
참고문헌 (15)
- J. Kim, "A Study on Thermal Analysis of Dual Beam Laser Welding of Thin Metal Sheet", Journal of the Korean Welding Society, 15(4), pp.99~108 (1997)
- 최해운, "다중 특성을 가지는 레이저 빔 제어를 통한 열영향 해석", 한국기계가공학회지, 21(1), pp.8~14 (2022), 한국기계가공학회[DOI]
- 한창민, "고압 임펠러 블레이드 레이저 용접부 설계를 위한 유한요소 해석", 대한용접접합학회지, 37(4), pp.299~305 (2019), 대한용접접합학회[DOI]
- 김관우, "원형 커버의 펄스 레이저 용접 후 부품 잔류변형 개선에 관한 유한요소해석", 대한용접접합학회지, 33(6), pp.60~66 (2015), 대한용접접합학회
- 조원익, "레이저-GMA 하이브리드 용접에서 유동에 의한 기포 및 기공 형성 해석", 대한용접접합학회지, 26(6), pp.67~73 (2008), 대한용접접합학회
- 권기보, "레이저용접에 의한 알루미늄 박판구조물의 용접변형 해석", 대한용접접합학회지, 27(3), pp.44~51 (2009), 대한용접접합학회
- G. Sierra, "Steel to aluminium key-hole laser welding", Materials Science and Engineering : A, 447(1-2), pp.197~208 (2007)
- Z. Liu, "Microstructure evolution and mechanical properties of SUS301L stainless steel sheet welded joint in ultrasonic vibration assisted laser welding", Optics & Laser Technology, 153, pp.108193~ (2022)
- A. Unni, "Determination of heat source model for simulating full penetration laser welding of 316 LN stainless steel by computational fluid dynamics", Materials Today: Proceedings, 45(6), pp.4465~4471 (2021)
- 표창민, "전역 최적화 알고리즘을 이용한 파이버 레이저 용접 열원 모델 구현에 관한 연구 Part III : 용접 파워에 따른 열원파라미터의 영향도 분석", 한국기계기술학회지, 23(4), pp.492~498 (2021), 한국기계기술학회[DOI]
- C. Pyo, "A Study on Welding Deformation in Fiber Laser Welding of 9% Nickel Steel through Finite Element Analysis Part I : Implementation of Welding Heat Source Model", Processes, 9(12), pp.2188~ (2021)
- 김관우, "Analysis of pulsed Nd:YAG laser welding of AISI 304 steel", Journal of Mechanical Science and Technology, 24(11), pp.2253~2259 (2010), 대한기계학회
- H. Chang, "AFinite element analysis of welding processes by using ABAQUS USER SUBROUTINE", The 2007 fall conference of the korean society of mechanical engineers, 24(11), pp.12~15 (2007)
- 최경환, "오스테나이트계 내열 구상흑연주철의 고온 특성", 한국주조공학회지, 37(2), pp.31~37 (2017), 한국주조공학회[DOI]
- K. Lee, "Calculation of Material Properties with JMatPro for the Process Simulation", Proceedings of the Korean Society for Technology of Plasticity Conference, pp.142~145 (2008), The Korean Society for Technology of Plasticity