연성접착제를 사용한 접착이음의 강도평가에 대한 해석
Analysis for Strength Estimation of Adhesive Joints using Ductile Adhesives
2
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
The objectives of the present study are to show how to predict the crack initiation at the terminus of adhesive bonded joints to calculate the crack growth in the adhesive layer using the total strain energy release rate. The crack propagation for ductile adhesives is theoretically estimated using R-curve. R-curve is determined from static shearing tests of single lap joints. The total strain energy release rate for single lap joints is evaluated using a boundary element analysis. The strength prediction is conducted by means of the R-curve and the total strain energy release rate. The conclusions are summarized as follows; (1) A crack propagation geometry of the bonded structure using ductile adhesive was predicted from the distribution of the total strain energy release rate. (2) The final failure load for lap joints is predicted by the R-curve method based on the fracture mechanics. (3) The final failure load for stiffened plates with a steel L-beam is predicted by the R-curve method based on the fracture mechanics.
Abstract
The objectives of the present study are to show how to predict the crack initiation at the terminus of adhesive bonded joints to calculate the crack growth in the adhesive layer using the total strain energy release rate. The crack propagation for ductile adhesives is theoretically estimated using R-curve. R-curve is determined from static shearing tests of single lap joints. The total strain energy release rate for single lap joints is evaluated using a boundary element analysis. The strength prediction is conducted by means of the R-curve and the total strain energy release rate. The conclusions are summarized as follows; (1) A crack propagation geometry of the bonded structure using ductile adhesive was predicted from the distribution of the total strain energy release rate. (2) The final failure load for lap joints is predicted by the R-curve method based on the fracture mechanics. (3) The final failure load for stiffened plates with a steel L-beam is predicted by the R-curve method based on the fracture mechanics.
참고문헌 (29)
- M. Goland, "The Stresses in Cemented Joints", J. Apple. Mech., 66, pp.17~26 (1944), ASME
- K. L. William, "The Stress Around a Fault or Crack in Dissimilar Media", Bulletin of the Seismological Society of America, 49(2), pp.199~211 (1959)
- D. B. Bogy, "Edge Bonded Dissimilar Orthogonal Elastic Wedges under Normal and Shear Loadings", J. Apple. Mech., 35, pp.146~152 (1968)
- D. B. Bogy, "Edge-bonded Dissimilar Orthogonal Elastic Wedges under Normal and Shear Loading", J. Apple. Mech., 35, pp.460~471 (1968)
- R. A. Westmann, "Torsion of a Cylindrical Rod Welded to an Elastic Half Space", J. Apple. Mech., 35, pp.197~202 (1968)
- D. B. Bogy, "Stress Singularities at Interface Corners in Bonded Dissimilar Isotropic Elastic Materials", Int. J. Solids Struc., 7, pp.993~1002 (1971)
- V. L. Hein, "Stress Singularities in a Two-Material Wedge", Int. J. Fract. Mech., 7, pp.317~321 (1971)
- P. S. Theocaris, "The Order of Singularity at a Multi-Wedge Corner of a Composite Plate", Int. J. Engng. Sci., 12, pp.107~114 (1974)
- D. B. Bogy, "Plane Solution for Traction Problems on Orthotropic Un- symmetrical Wedges and Symmetrically Twinned Wedges", J. Apple. Mech., 41(1), pp.203~210 (1974)
- M. Comminou, "Interface Crack With Frietion in the Contact Zone", J. Apple. Mech., 44, pp.780~787 (1977)
- C. Atkinson, "On Stress Singularities and Interface in Liner Elastic Fracture Mechanics", Int. J. Fract., 13(6), pp.807~812 (1977)
- M. Comminou, "The Interface Crack in a Shear Field", J. Apple. Mech., 45, pp.287~296 (1978)
- J. P. Dempsey, "On the Stress Singularities in the Plate Elasticity of Composite Wedge", J. Elast., 9(4), pp.373~382 (1979)
- L. M. Keer, "The Singularity at the Apex of a Bonded Wedge-Shaped Stamp", J. Apple. Mech., 46, pp.577~583 (1979)
- M. Comninou, "Effect of Friction on the Interface Crack Loaded in Shear", J. Elast., 10(2), pp.203~210 (1980)
- A. F. Mak, "A No-Ship Edge Crack on a Bimaterial Interface", J. Apple. Mech., 47, pp.816~821 (1980)
- S. S. Wang, "Boundary- Layer Effects in Composites", J. Apple. Mech., 49, pp.541~549 (1982)
- R. I. Zwiers, "On the Logarithmic Singularity of Free Edge Stress in Laminated Composites under Uniform Expansion", J. Apple. Mech., 49, pp.561~569 (1982)
- P. A. Gradin, "A Fracture Criterion for Edge-Bonded Bimaterial Bodies", Composite Materials, 16, pp.448~456 (1982)
- W. S. Johnson, "Stress Analysis of the Cracked-Lap-Shear Specimen", J. Testing and Evaluation, 15(6), pp.303~311 (1987), An ASTM Round - Robin
- H. L. Groth, "Stress Singularities and Fracture at Interface Corners in Bonded Joinats", Int. J. Adhesion and adhesive, 8(2), pp.107~114 (1988)
- A. F. Yee, "Fractography and Failure Mechanics of Rubber Modified Epoxy Resigns", Elsevier Apple. Sci., pp.291~350 (1989)
- D. B. Bogy, "On the Problem of a Loaded Crack Terminating at a Material Interface", J. Apple. Mech., 58, pp.991~998 (1991)
- S. O. Park, "A Study for Mutual Interference between Circular Inclusion and Crack in Finite-Width Plate by Boundary Element Method", Transaction of KSME, 18(6), pp.1474~1482 (1994)
- S. O. Park, "Analysis of Spiral Bevel Gear by Inverse Problem", Transaction of KSMTE, 10(5), pp.85~95 (2001)
- 박성완, "역문제에 의한 평치차의 토크 해석", 한국생산제조시스템학회지, 12(5), pp.24~34 (2003), 한국생산제조시스템학회
- 박성완, "인장-비틀림 하중에 의한 섬유강화 복합재료의 피로수명 예측", 한국생산제조시스템학회지, 13(6), pp.64~73 (2004), 한국생산제조시스템학회
- 박성완, "접착이음의 강도평가에 대한 해석", 한국생산제조시스템학회지, 14(5), pp.62~73 (2005), 한국생산제조시스템학회
- 박성완, "경계요소 순차근사법에 의한 응력확대계수 평가", 한국기계기술학회지, 10(2), pp.1~8 (2008), 한국기계기술학회