파손영역비를 이용한 복합재 접착 체결부의 파손강도 예측
Failure Load Prediction of the Composite Adhesive Joint Using the Damage Zone Ratio
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The composite joint has become an important research area because the structural efficiency of a structure with a joint is determined by its joints rather than by its basic structure since the joints are often the weakest areas in composite structures. In this paper, the strengths of adhesive joints consisting of metal and composites were predicted and tested by the maximum strain theory and damage zone theory. Nonlinear finite element analyses of adhesive joints considering the material nonlinearity of the adhesive layer were performed. From the tests and analyses, the strengths of the adhesive joints could be predicted to within 22.2% using the damage zone ratio.
Abstract
The composite joint has become an important research area because the structural efficiency of a structure with a joint is determined by its joints rather than by its basic structure since the joints are often the weakest areas in composite structures. In this paper, the strengths of adhesive joints consisting of metal and composites were predicted and tested by the maximum strain theory and damage zone theory. Nonlinear finite element analyses of adhesive joints considering the material nonlinearity of the adhesive layer were performed. From the tests and analyses, the strengths of the adhesive joints could be predicted to within 22.2% using the damage zone ratio.
참고문헌 (10)
- Reinhart J.J.(Eds), , Composite ASM International, 1, pp.479~495 (1987)
- Mallick P.K, "Fiber-Reinforced Composite", pp.418~ (1988)
- Choi J.H, "An Experimental Study of the Static Torque Capacity of the Adhesively-bonded Tubular Single Lap Joint", J. of Adhesion, 55, pp.245~260 (1996)
- James F.P. Owens, "Stiffness Behaviour Due to Fracture in Adhesively Bonded Composite-to-Aluminum Joints Ⅰ. Theoretical Model", Int. J. of Adhesion and Adhesives, 20, pp.39~45 (2000)
- James F.P. Owens, "Stiffness Behaviour Due to Fracture in Adhesively Bonded Composite-to-Aluminum Joints Ⅱ. Experimental", Int. J. of Adhesion and Adhesives, 20, pp.47~58 (2000)
- Choi J.H, "The Torque Transmission Capabilities of the Adhesively-Bonded Tubular Single Lap Joint and the Double lap Joint", J. Adhesion, 44, pp.197~212 (1994)
- Designing to Minimize Peel Stresses in Adhesive Bonded Joints, "Hart-Smith L.J", 238~266, pp.Delamination and Debonding of Materials, ASTM STP 876 (1985)
- Groth S.J, "A Method to Predict Fracture in an Adhesively Bonded Joint", Int. J. of Adhesion and Adhesives, 5, pp.19~22 (1985)
- Sheppard A, "A Damage Zone Model for the Failure Analysis of Adhesively Bonded Joints", Int. J. of Adhesion and Adhesives, 18, pp.385~400 (1998)
- Kim K.S, "Optimal Tubular Adhesive-Bonded Lap Joint of the Carbon Fiber Epoxy Composite-Shaft", Composite Structures, 21, pp.163~176 (1992)