EPS(Electronic Power Steering)에서 Worm Wheel의CAE 해석에 관한 연구
A Study on the CAE Analysis of Worm Wheel in EPS
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study is making a product for the development of a process worm wheel of making a shapefor gear for worm wheel without hobbing manufacturing process. Because of removing a hobbingprocess, plastic worm wheel for increased productivity and equivalent quality is produced in thismolding. As the result, CAE manufacturing process for a EPS worm wheel of small and middle stagecars and hybrid vehicle is developed. Especially, the considerations for analysis results of worm wheelare as follows. the first, CAE analysis for worm wheel of first stage is considered. the second, CAEanalysis for boss is considered. the third, CAE analysis for gear module strength of first stage isconsidered. Finally, the redesign of product drawings for troubled-considered in first stage try-out isconsidered in EPS worm wheel.
Abstract
This study is making a product for the development of a process worm wheel of making a shapefor gear for worm wheel without hobbing manufacturing process. Because of removing a hobbingprocess, plastic worm wheel for increased productivity and equivalent quality is produced in thismolding. As the result, CAE manufacturing process for a EPS worm wheel of small and middle stagecars and hybrid vehicle is developed. Especially, the considerations for analysis results of worm wheelare as follows. the first, CAE analysis for worm wheel of first stage is considered. the second, CAEanalysis for boss is considered. the third, CAE analysis for gear module strength of first stage isconsidered. Finally, the redesign of product drawings for troubled-considered in first stage try-out isconsidered in EPS worm wheel.
참고문헌 (5)
- Y. G. Liao, "Modeling and analysis of electric power steering system and its effect on vehicle dynamic behaviour", International Jol. of Vehicle Autonomous Systems, 1(2), pp.153~166 (2003)
- J. H. Ryu, "Development of a Steering HILS(Hard ware-In-the-Loop simulation", SAE, 7(9), pp.105~111 (1999)
- T. J. Park, "A Development of Hardware-in-the-Loop Simulation System For Electric Power Steering System", Transactions of KSME A, 24(12), pp.2883~2890 (2000)
- 조재웅, "자동차 완충기의 구조해석에 관한 연구", 한국기계기술학회지, 14(2), pp.31~40 (2012), 한국기계기술학회[DOI]
- 손홍붕, "자동차 시트 리크라이너들의 강도 특성 비교에 관한 연구", 한국기계기술학회지, 15(6), pp.887~892 (2013), 한국기계기술학회