충격하중에 의한 복합연막탄발사장치 감속기의 파손에 관한 분석
A Study on the Failure of Reducer for the Multi-Smoke Projectile Launching System by Impact Load
0
조회
0
다운로드
7
인용
0
참고문헌
키워드
초록
The multi-smoke projectile launching system, as part of an active protection system, is an important equipment in the protection of a tank. During the field operation of the tank, the multi-smoke projectile launching system failed to function. As a result of dismantling inspection the multi-smoke projectile launching system, it was confirmed that the gear shaft of the reducer was failed. Therefore, a finite element analysis on the gear shaft of the reducer in the multi-smoke projectile launching system was conducted with regards to the operation conditions of the tank. As a result of conducting the analysis, there was a possibility of the gear shaft being damaged. Finally improvements on the reducer of the multi-smoke projectile launching device are expected to be conducted in the future by utilizing the result of this study.
Abstract
The multi-smoke projectile launching system, as part of an active protection system, is an important equipment in the protection of a tank. During the field operation of the tank, the multi-smoke projectile launching system failed to function. As a result of dismantling inspection the multi-smoke projectile launching system, it was confirmed that the gear shaft of the reducer was failed. Therefore, a finite element analysis on the gear shaft of the reducer in the multi-smoke projectile launching system was conducted with regards to the operation conditions of the tank. As a result of conducting the analysis, there was a possibility of the gear shaft being damaged. Finally improvements on the reducer of the multi-smoke projectile launching device are expected to be conducted in the future by utilizing the result of this study.
참고문헌 (6)
- 박규철, "전차 탑재 L-밴드 펄스 도플러 레이더 설계 및 제작", 한국전자파학회 논문지, 20(6), pp.580~589 (2009), 한국전자파학회
- H. K. Lee, "Prediction of Active Protection Performance of a Plate", The Korean Society of Mechanical Engineers, pp.169~ (2014)
- 구본민, "복합연막탄 선회구동장치를 위한 정밀 BLDC 서보 위치 제어기 개발", 한국정보통신학회논문지, 10(3), pp.467~472 (2006), 한국정보통신학회
- 고등, "두께에 따른 알루미늄 폼 샌드위치의 충격적 특성에 대한해석 및 검증", 한국기계기술학회지, 17(1), pp.17~22 (2015), 한국기계기술학회
- United States Department of Defence, "Department of Defense Test Method Standard for Environmental Engineering Considerations and Laboratory Tests", MIL-STD-810G, 262~341 (2008)
- 조호선, "알루미늄 폼의 충격특성에 대한 유한요소해석", 한국기계기술학회지, 15(3), pp.339~344 (2013), 한국기계기술학회