전투차량용 워터제트 구동축 파손 원인분석 연구
A Study on the Water Jet Cardan Shaft Failure Analysis of Wheeled Armored Vehicle
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, analyzed the cause of failure of the cardan shaft for water propulsion of an armored wheeled vehicle. During the development test(DT), the vehicle was deflected to the left on the water. As a result of the confirmation, increasing angular displacement and abrasion of SPIDER(Universal joint) occurred. As a result of a structure analysis and torsion fracture test, cause of failure is not insufficient design and strength deficit of each parts. and as a result of a simulation review of the assembly layout of each part, it was confirmed that excessive rotational vibration occurred. In order to solve this problem, improved the assembly layout of the water propulsion system and the worn SPIDER lubrication. Since there has been no occurrence of the same case between military operations so far, it has been confirmed that the improvement plan is appropriate.
Abstract
In this study, analyzed the cause of failure of the cardan shaft for water propulsion of an armored wheeled vehicle. During the development test(DT), the vehicle was deflected to the left on the water. As a result of the confirmation, increasing angular displacement and abrasion of SPIDER(Universal joint) occurred. As a result of a structure analysis and torsion fracture test, cause of failure is not insufficient design and strength deficit of each parts. and as a result of a simulation review of the assembly layout of each part, it was confirmed that excessive rotational vibration occurred. In order to solve this problem, improved the assembly layout of the water propulsion system and the worn SPIDER lubrication. Since there has been no occurrence of the same case between military operations so far, it has been confirmed that the improvement plan is appropriate.
참고문헌 (5)
- 심기중, "3.5톤 상용차용 구동축 개발에 관한 연구", 한국기계가공학회지, 17(2), pp.153~159 (2018), 한국기계가공학회[DOI]
- Wu, Y-T., "Safety-Factor Based Approach for Probability- Based Design optimization", 42nd AIAA 2001, pp.1522~ (2001)
- 정상진, "워터제트 추진기 임펠러 체결용 볼트파손 원인 분석 연구", 한국기계가공학회지, 18(10), pp.48~53 (2019), 한국기계가공학회
- J. R. Kim, "Coupled Vibration of Lateral and Torsional Vibrations Driven through a Universal Joint", Korean Society for Noise and Vibration Engineering(KSNVE), pp.353~357 (1998)
- Y. R. Son, "Development and test of prototype water-jet propulsion boat", The Korean Welding & Joining Society, pp.213~215 (2004)