필링머신의 롤러 지그 개발에 관한 구조해석
Structural Analysis on Development of Roller Jig for Peeling Machine
0
조회
0
다운로드
10
인용
0
참고문헌
키워드
초록
Peeling machine has been industrially used to peel the metallic circular bar such as cast iron, cast steel, SUS series. Especially peeling process was reported to not ease in case of SUS series due to its high hardness. Structural analysis for roller jig in peeling machine was performed to evaluate the structural safety. For these purposes, stress, deformation and safety factor were investigated. As the results, maximum stress was occurred at shaft and maximum deformation was occurred at side plate in roller jig. Further since the minimum safety factor of top plate was 8.16 in case of guarantee pressure, it is considered that roller jig of peeling machine in thisstudy was structurally safe.
Abstract
Peeling machine has been industrially used to peel the metallic circular bar such as cast iron, cast steel, SUS series. Especially peeling process was reported to not ease in case of SUS series due to its high hardness. Structural analysis for roller jig in peeling machine was performed to evaluate the structural safety. For these purposes, stress, deformation and safety factor were investigated. As the results, maximum stress was occurred at shaft and maximum deformation was occurred at side plate in roller jig. Further since the minimum safety factor of top plate was 8.16 in case of guarantee pressure, it is considered that roller jig of peeling machine in thisstudy was structurally safe.
참고문헌 (11)
- S. I. Oh, "Optimum Condition of Peeling Using Knife Peeling Machine and Efficiency in “Tsukuba” Chestnut,”", Conference of Korean Institute of Forest Recreation and Welfare, pp.1028~1030 (2013)
- J. H. Seo, "A Study on Properties of Paper Mulberry and Effluent by Debarking Conditions of Drum Type Debarking Machine", Conference of Korea Technical Association of the Pulp and Paper Industry, pp.477~482 (2012)
- D. K. Park, "Development of Manufacturing Process for a Curvic Coupling of Machine Tools and Inspection Device", Journal of the Korean Society for Precision Engineering, 25(5), pp.28~33 (2008)
- 황지홍, "액화질소를 이용한 오픈 셀 실리콘 폼의 냉동 절삭조건 최적화", 한국생산제조학회지, 23(1), pp.32~37 (2014), 한국생산제조학회[DOI]
- 최진우, "Guidelines for Optimal Bearing Locations for High Dynamic Stiffness of a Machine Tool Spindle", 한국기계기술학회지, 17(5), pp.935~940 (2015), 한국기계기술학회
- 정낙신, "밀링 가공 시 채터 진동 예측의 해석적 방법", 대한기계학회논문집 A, 33(03), pp.210~217 (2009), 대한기계학회
- 배명일, "마이크로 드릴에 의한 구멍 가공시 드릴의 손상과 구멍의 관찰", 한국기계기술학회지, 18(4), pp.497~502 (2016), 한국기계기술학회
- 이승표, "버터플라이 밸브의 설계 안전도 평가", 한국생산제조학회지, 18(1), pp.29~35 (2009), 한국생산제조학회
- 김형규, "지르코늄 합금 관의 임계좌굴 압력 산정을 위한 최소안전율", 대한기계학회논문집 A, 35(3), pp.281~287 (2011), 대한기계학회
- S. K. Yun, "Mechanics of Materials" (2014), Autotech