인발성형 시스템을 이용한 스테인레스 육각봉의 압연 특성 해석 연구
Study on Analysis of Rolling Characteristics of Stainless Hexagonal Bar using Drawing System
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
SUS hexagonal bar have been widely used to manufacture the hexagonal bolt/nut, adapter and fittings. Raw SUS circular bar is used to make SUS hexagonal bar using drawing system. The purpose of this study is to investigate the characteristics, for instance, such as stress, strain and reduction ratio of area for bar. As the results, it was confirmed that the maximum stresses were occurred at edge of hexagonal bar, thus it could be worked as residual stress of hexagonal bar. The phenomenon of spring back was almost no found in all parts of hexagonal bar. Furthermore it showed that the reduction ratios of area were about mean 26% when SUS circular bar was changed to SUS hexagonal bar in this study.
Abstract
SUS hexagonal bar have been widely used to manufacture the hexagonal bolt/nut, adapter and fittings. Raw SUS circular bar is used to make SUS hexagonal bar using drawing system. The purpose of this study is to investigate the characteristics, for instance, such as stress, strain and reduction ratio of area for bar. As the results, it was confirmed that the maximum stresses were occurred at edge of hexagonal bar, thus it could be worked as residual stress of hexagonal bar. The phenomenon of spring back was almost no found in all parts of hexagonal bar. Furthermore it showed that the reduction ratios of area were about mean 26% when SUS circular bar was changed to SUS hexagonal bar in this study.
참고문헌 (9)
- S. K. Lee, "Review on Profile Drawing Process", The Korean Society for Technology of Plasticity, 25(1), pp.67~74 (2016)
- 정재환, "열간 조압연 공정에서 슬래브 측면부의 소성변형거동 예측", 소성∙가공, 23(7), pp.425~430 (2014), 한국소성∙가공학회
- B. H. Song, "Plastic Forming of Rolling Bearing Steel Components", Transaction of Materials Processing, 12(2), pp.83~87 (2003)
- W. S. Kang, "A Study on the Crater Wear of Carbide Tool in Cutting SUS 304", Journal of the Korean Society for Precision Engineering, 8(1), pp.84~95 (1991)
- 김봉수, "볼 베어링 외륜 열간형상링압연 공정의 유한요소해석", 한국기계가공학회지, 11(6), pp.164~168 (2012), 한국기계가공학회
- 변상민, "보강롤 구동 4 단 냉간압연기에서 작업롤의 수평하중 거동분석과 안정위치 결정을 위한 해석적 및 수치적 고찰", 대한기계학회논문집 A, 35(9), pp.977~982 (2011), 대한기계학회
- 이정길, "유성압연기를 사용한 스테인리스 강관 압연공정의 유한요소해석", 한국마린엔지니어링학회지, 35(2), pp.244~251 (2011), 한국마린엔지니어링학회
- 전만수, "3차원 강소성 유한요소법을 이용한 환상압연공정중 형상결함의 예측", 대한기계학회논문집 A, 28(10), pp.1492~1499 (2004), 대한기계학회
- 이영식, "SUS 육각봉 인발성형용 가변형 롤유닛에 관한 구조해석 연구", 한국기계기술학회지, 19(6), pp.827~833 (2017), 한국기계기술학회[DOI]