보정 공정을 포함한 U-채널 성형 공정에서 스프링백의 강건 설계
Robust Design of Springback in U-channel Forming including Compensation Process
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The most time consuming job in the sheet metal forming process is compensating for springback. Factors such as uneven material properties and process conditions generate noise, which in turn create springback. The springback is very sensitive to the process and noise conditions, and the main effects of the design variables cannot be obtained from mean analysis. Therefore, to achieve minimal springback, an effective design countermeasure must be put in place to reduce noise effects. In this study, two robust design methods toachieve minimal springback in U-channel forming, including compensation process, are proposed. The effectiveness of the proposed methods is shown with an example of the sidewall curl springback. The proposed methods consistently outperform our previous work, indicating that the complex method is more preferable to the mean analysis, if there is no evidence of additivity of effects.
Abstract
The most time consuming job in the sheet metal forming process is compensating for springback. Factors such as uneven material properties and process conditions generate noise, which in turn create springback. The springback is very sensitive to the process and noise conditions, and the main effects of the design variables cannot be obtained from mean analysis. Therefore, to achieve minimal springback, an effective design countermeasure must be put in place to reduce noise effects. In this study, two robust design methods toachieve minimal springback in U-channel forming, including compensation process, are proposed. The effectiveness of the proposed methods is shown with an example of the sidewall curl springback. The proposed methods consistently outperform our previous work, indicating that the complex method is more preferable to the mean analysis, if there is no evidence of additivity of effects.
참고문헌 (11)
- 인정제, "고강도강을 이용한 평판형 승용차 서스펜션 크로스 멤버의 성형", 한국기계기술학회지, 13(2), pp.155~164 (2011), 한국기계기술학회[DOI]
- 인정제, "프론트 사이드 멤버의 비틀림 저감을 위한 성형공정 설계", 한국기계기술학회지, 13(1), pp.105~112 (2011), 한국기계기술학회[DOI]
- L. M. Geng, "Role of Plastic Anisotropy and its Evolution on Springback", Int. J. Mech. Sci., 44(1), pp.123~148 (2002)[DOI]
- P. Chen, "Simulation of Springback Variation in Forming of Advanced High Strength Steels", Journal of Material Processing Technology, 190, pp.189~198 (2007)[DOI]
- 김경모, "박판 성형 공정에서 스프링백의 강건 설계", 한국기계가공학회지, 12(2), pp.41~48 (2013), 한국기계가공학회
- 인정제, "U-채널 성형 시 스프링백 보정 공정의 강건 설계", 한국기계기술학회지, 18(1), pp.82~88 (2016), 한국기계기술학회[DOI]
- K. Roll, "Benchmark 2 -Influence of Drawbeads on the Springback Behavior (S-RAIL-08)", NUMISHEET 2008, pp.45~52 (2008)
- Auto Form, "Autoform Engineering GmbH and ETH" (2013)
- W. Y. Fowlkes, "Engineering Methods for Robust Product Design" (1995), Addition-Wesley Publishing Company
- J. A. Guin, "Modification of the Complex of Constrained Optimization", Computer J., 10, pp.416~417 (1968)[DOI]
- M. J. Box, "A New Method of Constrained Optimization and a Comparison with Other Methods", Computer J., 8, pp.42~52 (1965)[DOI]