U-채널 성형 시 스프링백 보정 공정의 강건 설계
Robust Design of Springback Compensation Process in U-channel Forming
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The most time consuming operation during the tryout of new parts is the compensation of geometric deviations induced by springback. The variation of springback due to the noise factors such as material properties and forming conditions increase the difficulties of the compensation operation. If the forming process includes a drawing operation followed by a restriking operation, a robust design for springback compensation is needed for both operations. In this study, a new 2-stage procedure for robust springback compensation using Taguchi's orthogonal array experiments combined with the Pick-the-Winner rule and the design space reduction method is proposed. The effectiveness of the proposed method is shown with an example of the sidewall curl springback compensation in U-channel forming.
Abstract
The most time consuming operation during the tryout of new parts is the compensation of geometric deviations induced by springback. The variation of springback due to the noise factors such as material properties and forming conditions increase the difficulties of the compensation operation. If the forming process includes a drawing operation followed by a restriking operation, a robust design for springback compensation is needed for both operations. In this study, a new 2-stage procedure for robust springback compensation using Taguchi's orthogonal array experiments combined with the Pick-the-Winner rule and the design space reduction method is proposed. The effectiveness of the proposed method is shown with an example of the sidewall curl springback compensation in U-channel forming.
참고문헌 (16)
- 인정제, "고강도강을 이용한 평판형 승용차 서스펜션 크로스 멤버의 성형", 한국기계기술학회지, 13(2), pp.155~164 (2011), 한국기계기술학회
- 인정제, "프론트 사이드 멤버의 비틀림 저감을 위한 성형공정 설계", 한국기계기술학회지, 13(1), pp.105~112 (2011), 한국기계기술학회
- "Advanced High Strength Steel Application Guidelines Version. 4.1", WorldAutoSteel, ~ (2009)
- Z. T. Zhang, "Effects of Process Variables and Material Properties on the Springback Behavior of 2D-draw Bending Parts", Automotive Stamping Technology, pp.11~18 (1995), SAE
- L. M. Geng, "Role of Plastic Anisotropy and its Evolution on Springback", Int. J. Mech. Sci., 44(1), pp.123~148 (2002)
- W. Zhang, "Probabilistic Design of Aluminum Sheet Drawing for Reduced Risk of Wrinkling and Fracture", Reliability Engineering and System Safety, 94, pp.152~161 (2009)
- P. Chen, "Simulation of Springback Variation in Forming of Advanced High Strength Steels", Journal of Material Processing Technology, 190, pp.189~198 (2007)
- 인정제, "콤플렉스법을 이용한 U-채널 성형의 스프링백 강건 설계", 한국기계가공학회지, 12(1), pp.117~125 (2013), 한국기계가공학회
- 김경모, "박판 성형 공정에서 스프링백의 강건 설계", 한국기계가공학회지, 12(2), pp.41~48 (2013), 한국기계가공학회
- Quality Engineering using Robust Design, "M. S. Phadke", AT&T Bell Laboratories, 1~182 (1992)
- S. R. Schmidt, "Understanding Industrial Designed Experiments", pp.6-1~6-28 (1997), Air Academy Press
- S. Kota, "Use of Orthogonal Arrays in Mechanical Synthesis", Mechanism and Machine Theory, 28(6), pp.777~794 (1993)
- 박종천, "Pick-the-Winner법과 공간축소법에 기반한 플라스틱 사출성형품의 휨 최소화", 한국산학기술학회논문지, 11(4), pp.1171~1177 (2010), 한국산학기술학회
- Roll, K., "Benchmark 2 – Influence of Drawbeads on the Springback Behavior (S-RAIL-08)", NUMISHEET 2008, pp.45~52 (2008)
- Auto Form, "Autoform Engineering GmbH and ETH", Zurich, ~ (2013)
- W. Kubli, "Advanced Modeling of Reverse Loading Effects for Sheet Metal Forming Processes", NUMISHEET 2008, pp.479~484 (2008)