프레스 벤딩 공정에서 플랜지부의 마찰력이 스프링백에 미치는 영향에 대한 해석적 고찰
Finite element analysis of spring back caused by frictional force in area of flange in press bending process
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Springback is an essential task to be solved in order to make high-precision products in sheet metal forming. In this study, materials with four different elastic regions were used. For the forming analysis, the change of springback caused by the frictional force generated in the flange part during hat shape forming was considered by using the AutoForm analysis program. Factors affecting frictional force were blank holder force, friction coefficient, bead R and bead height. As a result of the forming analysis, the springback increases as the material with a larger elastic region increases. In addition, as the frictional force of the flange part increased, the tensile force in the forming direction increased and the springback decreased. In particular, the blank holder force and friction coefficient had a great effect on springback in mild materials (DC04, Al6016), and the bead effectively affects all materials. Through this study, it was considered that the springback decreased as the material with a smaller elastic region and the tensile force in the forming direction increased.
Abstract
Springback is an essential task to be solved in order to make high-precision products in sheet metal forming. In this study, materials with four different elastic regions were used. For the forming analysis, the change of springback caused by the frictional force generated in the flange part during hat shape forming was considered by using the AutoForm analysis program. Factors affecting frictional force were blank holder force, friction coefficient, bead R and bead height. As a result of the forming analysis, the springback increases as the material with a larger elastic region increases. In addition, as the frictional force of the flange part increased, the tensile force in the forming direction increased and the springback decreased. In particular, the blank holder force and friction coefficient had a great effect on springback in mild materials (DC04, Al6016), and the bead effectively affects all materials. Through this study, it was considered that the springback decreased as the material with a smaller elastic region and the tensile force in the forming direction increased.
참고문헌 (12)
- K. H. Kang, "Design Guideline with the Structural Analysis of the Press Die for Stamping an Auto-part with Ultra High Strength Steel of 1.5GPa UTS-grade", M. S., pp.2015
- Kwon Ku Kwan, "Prediction of springback through the coupled analysis of forming process and tool deformation", pp.2019
- O. S. Seo, "Prediction of Springback for Al alloy sheet using Yoshida-Uemori model", The Korean Society For Technology of Plasticity, 2012(5), pp.219~222 (2012)
- 곽정환, "초고강도강판 드로잉 성형에서 가변 블랭크 홀딩력에 의한 스프링백 경향", Design & Manufacturing, 12(3), pp.60~65 (2018), 한국금형공학회[DOI]
- Control of Springback and Di mensional Tolerances in Forming of Advanced High Strength Steel(AHSS)Parts, Part I : Load-Unload Tensile Test and V-Die Bending, "N. Kardes", Center for Precision Forming, The Ohio State University, ~, pp.Report CPF (2010), 1.4[DOI]
- YANG, Xi, "Prediction of springback in air-bending of Advanced High Strength steel (DP780) considering Young s modulus variation and with a piecewise hardening function", International Journal of Mechanical Sciences, 105, pp.266~272 (2016)
- 이동환, "1.2GPa급 초고강도강판의 단면 형태에 따른 스프링백에 관한 해석적 평가 및 연구", Design & Manufacturing, 13(4), pp.17~22 (2019), 한국금형공학회[DOI]
- K. Yilamu, "Bauschinger Effect on Springback of Clad Sheet Metals in Draw Bending", MATERIALS TRANSACTIONS, 51(7), pp.1364~1366 (2010)
- Hütte, H., "Untersuchungen zum Rückfederungsverhalten hochfester Stahlblechwerkstoffe beim Tiefziehen", pp.2001
- 문성준, "드로우비드력 측정용 실험금형", 소성∙가공, 17(7), pp.511~516 (2008), 한국소성∙가공학회
- S-H Kim, "Press Die Design Engineering" (2013), Daekwang Surim
- Y. S. Kwon, "Effects of the Friction and Draw-bead Shape on the Springback Amount in the U-draw Bending Process", The Korean Society For Technology of Plasticity, 2016(10), pp.209~209 (2016)