실험 계획법을 사용한 B-Pillar 성형공정에서 블랭크 형상 최적화
Optimization of blank geometry for the stamping process of B-pillar using design of experiments
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The shape of the blank greatly affects the formability and quality of the product after the stamping process. In this study, the geometry of the B-Pillar blank in the stamping process was optimized using design of experiments. The geometry of the blank for the B-pillar was simplified with the two length values and two radius values. The effects of design variables were studied through the Design of experiments. The stamping process of the B-pillar was predicted with the Finite Element Analysis (FEA). The optimized blank geometry was obtained. It results in the reduced maximum equivalent plastic strain. The local necking and the wrinkling did not occurred with the optimized blank geometry.
Abstract
The shape of the blank greatly affects the formability and quality of the product after the stamping process. In this study, the geometry of the B-Pillar blank in the stamping process was optimized using design of experiments. The geometry of the blank for the B-pillar was simplified with the two length values and two radius values. The effects of design variables were studied through the Design of experiments. The stamping process of the B-pillar was predicted with the Finite Element Analysis (FEA). The optimized blank geometry was obtained. It results in the reduced maximum equivalent plastic strain. The local necking and the wrinkling did not occurred with the optimized blank geometry.
참고문헌 (10)
- M. Karima, "Practical application of process simulation in stamping", Journal of materials processing technology, 45, pp.309~320 (1994)
- H. H. Bok, "Comparative study of the prediction of microstructure and mechanical properties for a hot-stamped B-pillar reinforcing part", International journal of mechanical sciences, 53(9), pp.744~752 (2011)
- 이사랑, "타원형 다단 딥 드로잉 제품의 성형성 향상을 위한초기 소재 형상 최적 설계", 한국산학기술학회논문지, 17(10), pp.696~701 (2016), 한국산학기술학회[DOI]
- R. George, "Hot forming of boron steels using heated and cooled tooling for tailored properties", Journal of Materials Processing Technology, 212(11), pp.2386~2399 (2012)
- K. S. Chung, "Ideal forming I. Homogeneous deformation with minimum plastic work", International Journal of Mechanical Sciences, 34(7), pp.575~591 (1992)
- K. S. Chung, "Ideal forming II. Sheet forming with optimum deformation", International Journal of Mechanical Sciences, 34(8), pp.617~633 (1992)
- S. H. Park, "Optimum blank design in sheet metal forming by the deformation path iteration method, International", Journal of Mechanical Sciences, 41(10), pp.1217~1232 (1999)
- H. S. Choi, "Optimization of Blank Shape for Hot Stamping of Center Pillar", The Korean Society Of Automotive Engineers, pp.2439~2445 (2009)
- 김지태, "프론트필러의 핫스템핑 공정설계를 위한 블랭크형상의 최적화 연구", 소성∙가공, 21(3), pp.186~194 (2012), 한국소성∙가공학회[DOI]
- NUMISHEET, "The Numisheet Benchmark Study", Benchmark Problem BM03, ~ (2008)