자동차 시트들에 적용되는 럼버 서포트의 와이어 두께별 강도 해석에 관한 연구
A Study on Strength Analysis by Wire Thickness of Lumber Support Applied at Automotive Seats
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the structural analysis was carried out according to the structure of lumber support. For the optimal design of the automotive lumber support, It was examined which one was most stable among three models A, B, and C. As the result of structural analysis, all three models showed the greatest deformations at the wire portion of the lumber support, and model A showed less equivalent stress and deformation compared with models B and C. As model A showed the lowest equivalent stress and deformation among all models, model A was shown to be the model with the excellent strength. This analysis established the stable design by comparing models A, B and C. Also, It is thought that this study result can be highly utilized at the seat design of real automobile.
Abstract
In this study, the structural analysis was carried out according to the structure of lumber support. For the optimal design of the automotive lumber support, It was examined which one was most stable among three models A, B, and C. As the result of structural analysis, all three models showed the greatest deformations at the wire portion of the lumber support, and model A showed less equivalent stress and deformation compared with models B and C. As model A showed the lowest equivalent stress and deformation among all models, model A was shown to be the model with the excellent strength. This analysis established the stable design by comparing models A, B and C. Also, It is thought that this study result can be highly utilized at the seat design of real automobile.
참고문헌 (9)
- 조준현, "자동차 파워트레인 샤프트 가공용 8축 복합가공기 베드의 유한요소 해석에 관한 연구", 한국기계가공학회지, 14(1), pp.9~14 (2015), 한국기계가공학회[DOI]
- 박명규, "초정밀 융합가공을 위한 주축이동식 자동선반의 구조해석에 관한 연구", 한국융합학회논문지, 9(5), pp.145~150 (2018), 한국융합학회[DOI]
- 황규완, "적층각도를 지닌 CFRP 시험편에서의 크랙전파 특성", 대한기계학회논문집 A, 40(12), pp.1013~1019 (2016), 대한기계학회
- 박재웅, "적층각도가 다른 단방향 CFRP와 SM45C샌드위치형 복합재료에 관한 융합적 연구", 한국융합학회논문지, 8(7), pp.231~236 (2017), 한국융합학회[DOI]
- 한규택, "유한요소법을 이용한 기능성 신발 구조체의 개발", 한국기계가공학회지, 12(3), pp.89~95 (2013), 한국기계가공학회
- 강대성, "소규모 공작기계용 소재공급장치의 이송 셔틀 시스템에 관한 구조해석", 한국기계가공학회지, 18(4), pp.62~68 (2019), 한국기계가공학회[DOI]
- 한문식, "Durability Study of Subway Brake Disc and Wheel-type Brake", 한국기계가공학회지, 18(7), pp.22~28 (2019), 한국기계가공학회
- 박진수, "MADYMO 해석을 통한 저속 후방추돌시 착좌조건이 목상해에 미치는 영향", 한국기계기술학회지, 21(1), pp.76~84 (2019), 한국기계기술학회[DOI]
- 김세종, "Daful을 이용한 산업용 로봇팔의 구조해석에 관한 연구", 한국기계기술학회지, 21(1), pp.159~163 (2019), 한국기계기술학회[DOI]