180° 원형 혼합배관에서 위치별 속도분포 및 출구직관거리의 균일도 특성에 관한 연구
A Characteristic Study on Velocity Distribution by Location and Uniformity Index according to Exit Straight Length in a 180° Circular Mixed Pipe
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, velocity distribution characteristics by location and uniformity according to exit straight length in a 180° mixed pipes were numerically analyzed using RSM (Reynolds Stress Model) turbulent model by changing various flow parameters such as working fluids, inlet air velocity etc. As a result of it, the working fluids characteristics was highly indicated by the viscous force difference, the maximum velocity points according to main pipe’s inlet velocity were indicated when 90° sectional location was distributed at X/D=0.5~0.6 region and 180° sectional location was distributed at Y/D=0.5 region. And the flow characteristics according to branch pipe’s inlet velocity when 90° sectional location was distributed at X/D=0.4~0.6 region and 180° sectional location was distributed at Y/D=0.5 region. Based on the results that the most stable exit straight length in flow uniformity was indicated at L/D=25~30 region, 40D is suggested as the effective measurement distance in the straight pipe downstream curved pipe of mixed pipe.
Abstract
In this study, velocity distribution characteristics by location and uniformity according to exit straight length in a 180° mixed pipes were numerically analyzed using RSM (Reynolds Stress Model) turbulent model by changing various flow parameters such as working fluids, inlet air velocity etc. As a result of it, the working fluids characteristics was highly indicated by the viscous force difference, the maximum velocity points according to main pipe’s inlet velocity were indicated when 90° sectional location was distributed at X/D=0.5~0.6 region and 180° sectional location was distributed at Y/D=0.5 region. And the flow characteristics according to branch pipe’s inlet velocity when 90° sectional location was distributed at X/D=0.4~0.6 region and 180° sectional location was distributed at Y/D=0.5 region. Based on the results that the most stable exit straight length in flow uniformity was indicated at L/D=25~30 region, 40D is suggested as the effective measurement distance in the straight pipe downstream curved pipe of mixed pipe.
참고문헌 (12)
- M. Rowe, "Measurement and computations of flow in pipe bends", J. Fluid Mech, 43, pp.771~783 (1970)
- J. Azzola, "Developing turbulent flow in a U-bend of circular cross section : Measurement and Computation", Trans. ASME of J. Fluids Eng, 108, pp.214~221 (1986)
- T. H. Chang, "An experimental study on pressure and velocity profiles of swirling flow in a 90 degree circular pipe", Proceedings of KSME, pp.430~435 (1997)
- 명현국, "원형 단면을 갖는 180° 굽은 곡관내 발달하는 난류유동에 관한 수치해석", 대한기계학회논문집 B, 30(10), pp.966~972 (2006), 대한기계학회
- S. Moravec, "Flow investigation in a model of a three dimensional human artery with Newtonian and Non-Newtonian fluids(Part I)", Biorheology, 20(6), pp.745~759 (1983)
- S. H. Sur, "Effects of bifurcation angle and area ratio on the unsteady flow", the Society of Air-Conditioning and Refrigerating Engineers of Korea, pp.169~174 (1995)
- S. Moravec, "Flow investigation in a model of a three dimensional human artery with Newtonian and Non-Newtonian fluids (Part I)", Biorheology, 20(6), pp.745~759 (1983)
- P. Rudolf, "Flow characteristics of curved ducts", Applied and Computational Mechanics, 1, pp.255~264 (2007)
- 진정정, "정사각형 단면을 갖는 180° 곡관에서 위치별 속도분포특성 및 직관거리의 유효성에 관한 연구", 한국산학기술학회논문지, 17(10), pp.618~627 (2016), 한국산학기술학회[DOI]
- G. H. Lee, "Experimental study of turbulent flow in a U-bend of circular cross-section", Transactions of the Korean Society of Mechanical Engineers-B, 22(7), pp.956~965 (1998)
- "ANSYS FLUENT Theory Guide 16.1 ANSYS Inc", ~ (2016)
- C. P. Om Ariara Guhan, "Numerical optimization of flow uniformity inside an under body-oval substrate to improve emissions of IC engines", Journal of Computational Design and Engineering, 3, pp.198~214 (2016)