상용차용 스페어타이어 캐리어 장치의 스프로킷 기어 개발에 관한 연구
A Study on Sprocket Gear Development of Spare Tire Carrier Device for Commercial Vehicles
3
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, in order to solve the quality problem (safety accident) that the chain breaks out of the wheel gear due to the problem of the spare tire carrier device, the wheel gear is rotated in such a way that the upper part of the chain is caught on one side of the triangular wheel gear. When falling, the tire falls due to the chain falling off and the chain is caught by the wheel gear so that it cannot bear the tire load and slip occurs. Also, in order to solve the quality problem that the chain is caught (due to malfunction), the “ㄷ” shaped chain the guide should play the role of guiding the movement of the chain by holding the chain in the direction. The technical development goal is to solve the problem of the chain dropping and the chain hanging from the wheel gear of this product.
Abstract
In this study, in order to solve the quality problem (safety accident) that the chain breaks out of the wheel gear due to the problem of the spare tire carrier device, the wheel gear is rotated in such a way that the upper part of the chain is caught on one side of the triangular wheel gear. When falling, the tire falls due to the chain falling off and the chain is caught by the wheel gear so that it cannot bear the tire load and slip occurs. Also, in order to solve the quality problem that the chain is caught (due to malfunction), the “ㄷ” shaped chain the guide should play the role of guiding the movement of the chain by holding the chain in the direction. The technical development goal is to solve the problem of the chain dropping and the chain hanging from the wheel gear of this product.
참고문헌 (7)
- K. C. Lim, "Spare tire carrier sprocket gear structure analysis for commercial vehicle", 2017 KSMT Annual Meeting, (12), pp.53~54 (2017)
- K. C. Lim, "Frame member structure analysis for light truck weight", KSMTE Annual Spring Conference 2017, pp.182~ (2017)
- S. H. Kwon, "Reliability Analysis of Fatigue Life for Truck Frame FE Model", KSME Annual Autumn Conference, 11, pp.1026~1031 (2010)
- V. Rahul, "Structural analysis of Pick-Up Truck Chassis using Fem", International Journal of ChemTech Research, 9(06), pp.384~391 (2016)
- J. J. Yun, "The Development of Cowl-Cross Member parts by High Strength Steel", KSME Annual Spring Conference, 5, pp.307~308 (2013)
- E. P. Kwon, "Development of lightweight AHSS cross member", 2016 KSAE Annual Spring Conference, 5, pp.904~904 (2016)
- M. S. Lee, "Study on the structural prpperties for the shape of special equiied vehicles cross member", KSME Annual Spring Conference, 5, pp.110~112 (2015)