자동차 파킹기어와 멈춤쇠의 접촉위치에 따른안정성 연구
Study on Stability According to Contact Location BetweenParking Gear and Pawl of Automotive
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Parking gear is essential parts of automotive to park on flat or slope ground. Parking of, especially, big-sized vehicle such as bus and truck is very important problem related to safety. Stability of parking gear may differ from contact location between parking gear and pawl. The purpose of this study is to investigate the influence of stability depending on contact location using numerical analysis. Furthermore the results obtained by numerical analysis were applied to real vehicles to evaluate established-product of parking gear. As the results, safety criterion of parking gear showed below 0.31ton and thus it was confirmed that parking gear of this study was suitable to small-sized vehicle.
Abstract
Parking gear is essential parts of automotive to park on flat or slope ground. Parking of, especially, big-sized vehicle such as bus and truck is very important problem related to safety. Stability of parking gear may differ from contact location between parking gear and pawl. The purpose of this study is to investigate the influence of stability depending on contact location using numerical analysis. Furthermore the results obtained by numerical analysis were applied to real vehicles to evaluate established-product of parking gear. As the results, safety criterion of parking gear showed below 0.31ton and thus it was confirmed that parking gear of this study was suitable to small-sized vehicle.
참고문헌 (9)
- Y. S. Choi, "Technical Trend of Automotive Passive Safety System", Journal of the Korean Society of Automotive Engineers, 42(7), pp.36~40 (2020)
- 김봉환, "HEEDS를 이용한 전기자동차에서의 모터 축 최적설계에 관한 연구", 한국기계기술학회지, 20(6), pp.751~756 (2018), 한국기계기술학회[DOI]
- J. I. Jeong, "Emergency Safety for Automated Vehicles", Journal of the Korean Society of Automotive Engineers, 42(5), pp.25~28 (2020)
- 박진영, "유압 펌프를 이용한 전자식 브레이크의 응답 시간에 관한 연구", 한국자동차공학회 논문집, 27(11), pp.853~860 (2019), 한국자동차공학회[DOI]
- J. H. Cho, "A Case Study for Developing a Functional Safety Concept for Electronic Parking Brake to be Compliant with Automotive Functional Sfaety", The Institute of Electronics and Information Engineers, Autumn Conference, pp.873~875 (2019)
- 문현식, "자동차용 파킹 락 기어의 내구시험과 시험 지그 개발", 한국산학기술학회논문지, 19(6), pp.104~109 (2018), 한국산학기술학회[DOI]
- H. S. Mun, "Structural Analysis for Durability Test of Parking Gear", The Korean Society of Automotive Engineers, Autumn Conference, pp, pp.476~473 (2017)
- 손명규, "비 직선 기어 홈 구조를 갖는 자동차용 파킹기어의 열간단조 해석", 한국기계기술학회지, 21(1), pp.126~132 (2019), 한국기계기술학회[DOI]
- S. G. Yun, "Mechanics of Materials" (2020), Autotech