충격 감쇄용 신축이음관의 상수도 배관 적용을 위한 피로 내구성 해석
Analysis on Fatigue Durability for Applying Flexible Joint with Impact Damping to Pipe for Water Supply
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Pipe for water supply is one of the important parts that supply water to home, factory and so on. Water leakage in pipe for water supply due to deterioration, ground sinking and earthquake leads to enormous economical loss. Therefore, pipe for water supply should be designed to satisfy the requirement of, for instance, structural stability and fatigue durability. The purpose of this study was to investigate the fatigue durability of flexible joint for relaxing the impact due to earthquake and ground sinking. For this purpose, flexible joint was simulated using dynamic characteristics and fatigue life. As the results, the problem of fatigue durability may occur when flexible joint and pipe for water supply are treated as rigid body in simulation. Thus it means that the role of packing in flexible joint is very important and packing should be designed as optimal conditions that are considered fatigue durability as well as waterproof.
Abstract
Pipe for water supply is one of the important parts that supply water to home, factory and so on. Water leakage in pipe for water supply due to deterioration, ground sinking and earthquake leads to enormous economical loss. Therefore, pipe for water supply should be designed to satisfy the requirement of, for instance, structural stability and fatigue durability. The purpose of this study was to investigate the fatigue durability of flexible joint for relaxing the impact due to earthquake and ground sinking. For this purpose, flexible joint was simulated using dynamic characteristics and fatigue life. As the results, the problem of fatigue durability may occur when flexible joint and pipe for water supply are treated as rigid body in simulation. Thus it means that the role of packing in flexible joint is very important and packing should be designed as optimal conditions that are considered fatigue durability as well as waterproof.
참고문헌 (10)
- W. H. Kang, "Business Performance on Increasing the Flow Rate and Direction for Advanced Operation of Local Waterworks", Journal of the Korean Society of Civil Engineers, 67(4), pp.32~35 (2019)
- Policy Focus, "T. Y. Kwak", Gyeongnam Development Institute, 1~44 (2013)
- 한문식, "스트럿 바의 구조 해석을 통한 피로 내구성에 관한 연구", 한국자동차공학회 논문집, 24(5), pp.504~511 (2016), 한국자동차공학회[DOI]
- 장재익, "응력수명법을 이용한 탄소섬유강화복합재 로어 컨트롤 아암의 내구성 평가", 대한기계학회논문집 A, 41(11), pp.1131~1137 (2017), 대한기계학회
- 이정민, "연속식 하역기 Tension Bar의 피로수명 예측에 관한 연구", 대한기계학회논문집 A, 43(4), pp.223~229 (2019), 대한기계학회
- 김태안, "피로수명 연장을 위한 차량용 드라이브 샤프트의 형상최적설계", 대한기계학회논문집 A, 43(1), pp.67~72 (2019), 대한기계학회
- 서석진, "충격 감쇄용 신축이음관의 상수도 배관 적용을 위한 구조 안정성 해석", 한국기계기술학회지, 21(5), pp.818~825 (2019), 한국기계기술학회[DOI]
- J. Tartanlia, "Comparison of Monotonic and Cyclic Properties of Ductile Irons in the AFS", DOE Strain-Life Fatigue Database for Cast Iron, 2012, 7~22
- 구준환, "고무부품의 동특성 예측", 대한기계학회논문집 A, 33(11), pp.1244~1248 (2009), 대한기계학회
- 정일호, "OHT 차량 벨트 동특성 및 피로 수명에 관한 연구", 대한기계학회논문집 A, 29(8), pp.1085~1092 (2005), 대한기계학회