리튬 이온 배터리의 냉각유로에서 와류발생기에 의한 열전달 향상에 대한 수치해석
Numerical Analysis on the Heat Transfer Improvement of Cooling Passage in Lithium-ion Battery by using Vortex Generator
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The improvement of heat transfer in water cooling passage of lithium-ion battery is numerically studied by employing trapezoidal vortex generators. Battery Design StudioⓇ software is used for modeling electro-chemical heat generation in the battery. The conjugated heat transfer is analyzed with the commercial package STAR-CCM+ in terms of inlet flow velocities. The result shows that vortex generator enhances the convective heat transfer by developing thermal boundary layers and secondary flows in downstream, which results in reducing the average temperature of the battery by about 1℃. The heat transfer is enhanced for the whole inlet velocity, while the pressure loss sharply increases at more than inlet velocity of 0.1m/s. The optimum inlet velocity is around 0.1m/s for in terms of the heat transfer and pressure loss.
Abstract
The improvement of heat transfer in water cooling passage of lithium-ion battery is numerically studied by employing trapezoidal vortex generators. Battery Design StudioⓇ software is used for modeling electro-chemical heat generation in the battery. The conjugated heat transfer is analyzed with the commercial package STAR-CCM+ in terms of inlet flow velocities. The result shows that vortex generator enhances the convective heat transfer by developing thermal boundary layers and secondary flows in downstream, which results in reducing the average temperature of the battery by about 1℃. The heat transfer is enhanced for the whole inlet velocity, while the pressure loss sharply increases at more than inlet velocity of 0.1m/s. The optimum inlet velocity is around 0.1m/s for in terms of the heat transfer and pressure loss.
참고문헌 (9)
- H. Liu, "Thermal issues about Li-ion batteries and recent progress in battery thermal management systems : A review", Energy Conversion and Management, 150, pp.304~330 (2017)
- T. Deng, "Study on thermal management of rectangular Li-ion battery with serpentine-channel cold plate", International Journal of Heat and Mass Transfer, 125, pp.143~152 (2018)
- C. Lan, "Thermal management for high power lithium-ion battery by minichannel aluminum tubes", Applied Thermal Engineering, 101, pp.284~292 (2016)
- L. W. Jin, "Ultra-thin minichannel LCP for EV battery thermal management", Applied Energy, 113, pp.1786~1794 (2014)
- 박태환, "사각채널에서 사다리꼴 와류발생기에 의한 열전달 촉진에 대한 수치해석", 한국기계기술학회지, 20(6), pp.852~857 (2018), 한국기계기술학회[DOI]
- 박태환, "사다리꼴 와류발생기의 경사각과 충돌각이 열전달 성능에 미치는 영향에 대한 수치해석", 한국기계기술학회지, 21(2), pp.288~293 (2019), 한국기계기술학회[DOI]
- A. Ghanem, "Energy efficiency in process industry – High-efficiency vortex(HEV)multifunctional heat exchanger", Renewable Energy, 56, pp.96~104 (2013)
- G. Damblanc, "Validation of a new simulation tool for the analysis of electrochemical and thermal performance of lithium ion batteries", JSAE Annual Congress (2011)
- U. S. Kim, "Modeling for the schale-up of a lithium-ion polymer battery", Journal of Power Sources, 189, pp.841~846 (2009)