실험계획법을 이용한 3D프린터 가공조건 최적화에 관한 연구
A Study on the Optimization of 3D Printer Processing Conditions using Experiment Design
0
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
The purpose of this study was to establish the optimum experimental conditions by investigating the relationship between the nine experimental conditions using Taguchi technique. Through experiments, we found that the weight, thickness, and length of the sample were most affected by the angle at which the sample was installed, while the width had the largest influence on the sample's x-axis and the inner diameter. It was confirmed. Therefore, through this experiment, it was confirmed that the installation angle of the product had the greatest influence on the error occurrence of the product during 3D printer processing.
Abstract
The purpose of this study was to establish the optimum experimental conditions by investigating the relationship between the nine experimental conditions using Taguchi technique. Through experiments, we found that the weight, thickness, and length of the sample were most affected by the angle at which the sample was installed, while the width had the largest influence on the sample's x-axis and the inner diameter. It was confirmed. Therefore, through this experiment, it was confirmed that the installation angle of the product had the greatest influence on the error occurrence of the product during 3D printer processing.
참고문헌 (7)
- Han, M. S., "The performance evaluation of reverse engineering system using micro stepper", Journal of The Korean Society of Manufacturing Technology Engineers, pp.34~344 (2004)
- Cantrell, "Experim ental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts", Rapid Prototyping Journal, 23(4), pp.811~824 (2017)
- Han, M. S., "The Inspection of Press Forming Product of forward conner parts at automobile through Application of Reverse Engineering System", Journal of Korean Society for Precision Engineering, pp.968~971 (2005)
- 이원희, "잉크젯 기술을 응용한 파우더 기반의 3차원 임의형상제작에 관한 연구", 박사, 지능기계공학, pp.2007
- Browder, Russell E., "Entrepreneurship research, makers, and the maker movement", Academy of Management Proceedings, 2017(1) (2017)
- 홍청민, "사출성형에서 PBT 색상이 기계적성질에 미치는 영향", 한국기계기술학회지, 21(4), pp.756~761 (2019), 한국기계기술학회[DOI]
- Cubicon, "Cubicreator 2.5.1 User Manual", 35~ (2015)