수소 장입된 극저온용 철강 소재의 수소 취화 특성 평가 Part I : 수소 장입량 비교
Research for Hydrogen Embrittlement Susceptibility of Hydrogen Charged Cryogenic Steels Part I : Hydrogen Charging
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Due to global warming and environmental pollution, environmental regulations are getting stronger, and the International Maritime Organization announced regulations to reduce CO2 emissions in 2018. In order to respond to this, interest in hydrogen energy is growing, and research on liquid hydrogen is spotlighted for storage and transport of large amounts of hydrogen. Hydrogen reduces in volume to 1/800 when liquefied, but its boiling point is close to absolute zero(-253°C), and hydrogen embrittlement that penetrates other materials and weakens mechanical properties. In this study, the change of mechanical properties under cryogenic conditions (-196 degrees below zero) was confirmed after charging hydrogen into existing cryogenic materials (Stainless steel, High Manganese steel, 9% Nickel steel). In Part I, hydrogen was charged using an electrochemical method and quantitative evaluation was performed. In all four materials, as the changing time increased, the diffusible hydrogen concentration increased. After 24 hours charging, the hydrogen loading of 20 wppm in 9% Ni steel and 15 wppm in high-Mn steel was confirmed. In a follow-up study, we plan to study the effect of hydrogen charging by comparing the results of the mechanical properties test with the above results.
Abstract
Due to global warming and environmental pollution, environmental regulations are getting stronger, and the International Maritime Organization announced regulations to reduce CO2 emissions in 2018. In order to respond to this, interest in hydrogen energy is growing, and research on liquid hydrogen is spotlighted for storage and transport of large amounts of hydrogen. Hydrogen reduces in volume to 1/800 when liquefied, but its boiling point is close to absolute zero(-253°C), and hydrogen embrittlement that penetrates other materials and weakens mechanical properties. In this study, the change of mechanical properties under cryogenic conditions (-196 degrees below zero) was confirmed after charging hydrogen into existing cryogenic materials (Stainless steel, High Manganese steel, 9% Nickel steel). In Part I, hydrogen was charged using an electrochemical method and quantitative evaluation was performed. In all four materials, as the changing time increased, the diffusible hydrogen concentration increased. After 24 hours charging, the hydrogen loading of 20 wppm in 9% Ni steel and 15 wppm in high-Mn steel was confirmed. In a follow-up study, we plan to study the effect of hydrogen charging by comparing the results of the mechanical properties test with the above results.
참고문헌 (19)
- "72nd session, 9-13 April 2018"[URL]
- "From LNG Carriers to Liquefied hydrogen carriers"[URL]
- Mori, D., "Recent challenges of hydrogen storage technologies for fuel cell vehicles", International Journal of Hydrogen Energy, 34(10), pp.4569~4574 (2009)
- Barrera, O., "Understanding and mitigating hydrogen embrittlement of steels: a review of experimental, modelling and design progress from atomistic to continuum", J Mater Sci, 53, pp.6251~6290 (2018)
- Dwivedi, S., "Effect of hydrogen in advanced high strength steel materials", International Journal of Hydrogen Energy, (51), pp.28007~28030 (2019)
- Deya, S., "Effect of Hydrogen on Mechanical Degradation and Fatigue in 7075 Aluminium Alloy with In-situ Hydrogenation", Procedia Engineering, 114, pp.461~469 (2015)
- Sampath, D., "Hydrogen- Assisted Cracking Behavior of Ni Alloy 718: Microstructure, H Testing Protocol, and Fractography", Metall Mater Trans A, 52, pp.46~64 (2021)
- Fournier, L., "Cathodic hydrogen embrittlement in alloy 718", Materials Science and Engineering: A, 269(1–2), pp.111~119 (1999)
- Bal, B., "A detailed investigation of the effect of hydrogen on the mechanical response and microstructure of Al 7075 alloy under medium strain rate impact loading", International Journal of Hydrogen Energy, 45(46), pp.25509~25522 (2020)
- Bal, B., "Effect of hydrogen on fracture locus of Fe–16Mn–0.6C–2.15Al TWIP steel", International Journal of Hydrogen Energy, 45(58), pp.34227~34240 (2020)
- Nguyen, L., "Charpy Impact Properties of Hydrogen-Exposed 316L Stainless Steel at Ambient and Cryogenic Temperatures", Metals, 9, pp.625~ (2019)
- Koyama, M, "Overview of hydrogen embrittlement in high-Mn steels", International Journal of Hydrogen Energy, 42(17), pp.12706~12723 (2017)
- 김재웅, "선박 극저온 탱크용 9% 니켈강 소재 FCAW 맞대기 용접 연구 PART I : 용접부 신뢰성 연구", 한국기계기술학회지, 23(3), pp.354~359 (2021), 한국기계기술학회[DOI]
- Dwivedi, S., "Hydrogen embrittlement in different materials: A review", International Journal of Hydrogen Energy, 43(46), pp.21603~21616 (2018)
- Ozdirik, B., "Development of an Electrochemical Procedure for Monitoring Hydrogen Sorption", Desorption in Steel, 2017, pp.164(13), 747~757
- Changdong Yin, "Hydrogen Concentration Distribution in 2.25Cr-1Mo-0.25V Steel under the Electrochemical Hydrogen Charging and Its Influence on the Mechanical Properties", Materials, 13(10), pp.2263~ (2020), MDPI AG[DOI]
- Momotani, Y., "Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel", Int J Hydrogen Energ, 42, pp.3371~3379 (2016)
- Dong, C., "Effects of hydrogen-charging on the susceptibility of X100 pipeline steel to hydrogen-induced cracking", Int J Hydrogen Energ, 34, pp.9879~9884 (2009)
- Escobar, D., "Evaluation of hydrogen trapping in high strength steels by thermal desorption spectroscopy", Mater Sci Eng A, 551, pp.50~58 (2012)