상관분석 및 의사결정나무를 통한 사출 성형품 변형의 영향 인자 분석
Analysis of Influence Factors of Injection Molded Product Deformation Through Correlation Analysis and Decision-Tree
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This paper analyzed the correlation between injection molding factors through correlation analysis. In addition, the decision-tree model, which is a white box model with excellent explanatory power, was used to obtain optimal molding conditions that satisfy multiple constraint conditions. First, 243 data to be used in the experiment were created through a full factorial design. Second, a correlation analysis was conducted to understand the correlation. Third, to verify the decision-tree model, the prediction performance was evaluated using RMSE. As a result, good prediction performance was confirmed. A decision-tree experiment analysis was conducted. As a result of the progress, the same results as the correlation analysis were derived. Based on the previous analysis results, optimal molding conditions were applied to CAE. As a result, the amount of deformation in the multi-cavity could be improved by about 1.1% and 2.72% while satisfying the constraint.
Abstract
This paper analyzed the correlation between injection molding factors through correlation analysis. In addition, the decision-tree model, which is a white box model with excellent explanatory power, was used to obtain optimal molding conditions that satisfy multiple constraint conditions. First, 243 data to be used in the experiment were created through a full factorial design. Second, a correlation analysis was conducted to understand the correlation. Third, to verify the decision-tree model, the prediction performance was evaluated using RMSE. As a result, good prediction performance was confirmed. A decision-tree experiment analysis was conducted. As a result of the progress, the same results as the correlation analysis were derived. Based on the previous analysis results, optimal molding conditions were applied to CAE. As a result, the amount of deformation in the multi-cavity could be improved by about 1.1% and 2.72% while satisfying the constraint.
참고문헌 (10)
- 한성렬, "써큐레이터의 플라스틱 후면 커버 성형용 금형에 적용된 형상 적응형 냉각 채널의 효과", 한국기계기술학회지, 23(1), pp.7~12 (2021), 한국기계기술학회[DOI]
- 박근, "실험계획법과 수치해석을 연계한 정밀 전자부품 사출성형 공정의 최적설계", 대한기계학회논문집 A, 26(7), pp.17~1356 (2002), 대한기계학회
- 허용정, "CAE와 실험계획법을 연계한 사출 성형 시스템 최적화에 관한 연구", 한국산학기술학회논문지, 7(3), pp.271~277 (2006), 한국산학기술학회
- 김현필, "효과적인 웰드라인 제어를 위한 사출성형 유동해석", 한국생산제조학회지, 10(2), pp.64~72 (2001), 한국생산제조학회
- 양동철, "인공신경망 구조에 따른 사출 성형폼 품질의 예측성능 차이에 대한 비교 연구", Design & Manufacturing, 15(1), pp.48~56 (2021), 한국금형공학회[DOI]
- 이준한, "인공신경망을 이용한 사출성형품의 무게 안정성 제어에 대한 연구", 한국산업융합학회논문집, 23(5), pp.773~787 (2020), 한국산업융합학회[DOI]
- 양동철, "인공신경망을 활용한 사출성형품의 질량과 치수 예측에 관한 연구", Design & Manufacturing, 14(3), pp.1~7 (2020), 한국금형공학회[DOI]
- 황순환, "CAE와 Decision-tree를 이용한 사출성형 공정개선에 관한 연구", 한국산학기술학회논문지, 22(4), pp.580~586 (2021), 한국산학기술학회[DOI]
- 이용선, "다구찌 방법을 이용한 자동차플라스틱 라디에이터 탱크의 변형 최적화", 한국기계기술학회지, 23(2), pp.271~276 (2021), 한국기계기술학회[DOI]
- 한성렬, "자동차 스티어링 휠에 조립되는 플라스틱 베젤의 변형 최적화에 관한 연구", 한국기계가공학회지, 16(5), pp.105~112 (2017), 한국기계가공학회[DOI]